EC21 Product Catalogs - medium temperature

Bebur BT6308 Ozone Analyzer for Drink Water Wastewater Industrial Process Water

20241224

temperature of the sample water, and the output signal of the sensor is compensated by an electronic device, so that the measured value can be corrected with the change of temperature (temperature co

Digital Infrared Radiometer

20240527

Temperature -40℃ ~ +50 ℃ Dimension 279（L）* 202（H）*274（D）---RLK601、RLK602、RLK602D 368（L）* 202（H）*274（D）---RLK603 Weight 8.0Kg(RLK601、RLK602、RLK602D)/10Kg(RLK60

Master Meter Gas Flow Calibration System

20240417

temperature conversion, the indicated error of the flowmeter under test is determined. Drawing on international advanced experiences, a pulsation eliminator has been incorporated into the pipeline du

Two-Slot Four-Hole Multi-Function Pour Point and Cold Filter Point Tester

20231020

medium, can reach -60 ℃ in 30 minutes; 3. The temperature of the two groups of baths is controlled separately, and each group can carry out 2 sample tests. 4. The instrument is made of cold-rolled

ACP Electrical Current Transformer Test, CT/PT Analyzer

20210224

Temperature measurement -50~100 Celsius degree, error<3 Celsius degree 15 CT Secondary burden Range 0-160ohm (automatically change range in 2ohm/ 20ohm/80ohm/160ohm) Error<0.2%RDG+0.02%FS Maximum re

Dual Lens Borescope

20160715

Temperature -20 º to 60 º C (-4º to 140º F) Storage Temperatur -20 º to 60 º C (-4º to 140º F) Relative Humidity 95% max Waterproof IP67(Insertion tube and tip

JB-300S Digital Display Semiautomatic Impact Testing Machine

20211028

temperature of 20°C±5°C; (2) relative humidity is not more than 85%; (3) the surrounding non corrosive medium, no vibration, no strong electromagnetic interference environment; (4) mounted on the

STLL-3 Automatic Asphalt Softening Point Meter

20150509

8.Temperature control: Water is used as the bath medium for binders with softening points below 80°C. Above this temperature glycerol is used in place of water. Softening Point Meter

Gas Pycnometer Analyzer G-DenPyc 2900

20240118

temperature up and down easily, also hold modules stay at the best temperature(25 C) which can restrain transducer reading’s temperature drift and keep system temperature uniformity; System can mai

ASTM D2732 Film Free Shrink Tester

20240315

ASTM D2732 Film Free Shrink Tester determines the degree of unrestrained linear thermal shrinkage at given temperatures of plastic film and sheeting in fluid medium. It complies with ASTM D2732. ASTM

CDW-60 Impact Test Low Temperature Chamber / Environmental Chamber

20190815

1 minute resolution 8. Cooling medium: ethanol or other ice-free liquid 9. Stirring motor: 23W 10. The Working power: 220V ~ 240V, 50HZ, 2.3KW 11. Operating environment temperature: 5 °c ~ 25 °c

Low Temperature Meter / Impact Testing Machine

20190821

1 minute resolution 8. Cooling medium: ethanol or other ice-free liquid 9. Stirring motor: 23W 10. The Working power: 220V ~ 240V, 50HZ, 2.3KW 11. Operating environment temperature: 5 °c ~ 25 °c

Film Free Shrink Tester Shrinkable Film Testing Machine Plastic Film

20221214

medium at different temperatures. Film Free Shrink Tester Shrinkable Film Testing Machine Plastic Film Features: l Embedded system controls l Touch screen operation l TFT real color display l Digita

Horizontal Type Valve Pressure Test Bench

20220509

temperature is Max 60 degrees centigrade , Min 5 degrees centigrade Oil circuit system Pressure 28Mpa max Test Medium Water(Allows to add rust inhibitor) kerosene or other liquid it’s viscosity not

Liquid-Filled Pressure Gauge

20210128

temperature, the glycerin/water mixture in a gauge freezes at a seriously low temperature (below -40 degrees). Are liquid filled gauges better?+ Liquid-filled Gauges Longer Lifetimes and Greater Accu

YFT-400 Horizontal Claws Clamping Type Flange Valve Test Bench for Gate Valve Seal and Shell Test

20230330

temperature, elongate the life of valve test bench. 8. PLC control touch screen display pressure diagram and printer system is optional. 9.Safety door is optional.Technical parameters and sizes Para

Ultra High Pressure Seals

20230909

steel pipe. Working pressure: ≤ 120 MPa Working temperature: -20 to +80℃ Working medium: water, emulsion, hydraulic oil Material: Polyurethane For more information, please visit our website .

MDKW-SL Gas Meter Real Flow Recirculation Calibration Facility

20240308

Medium Nitrogen Environment Temperature (20±2)℃ Relative Humidity ≤90% Compressed Gas （0.45～0.7）MPaPower Supply 380V±10％, 15A 220V±10％, 16A Test Bench Size L × W × H 2200 × 1600

New Olympus BondMaster 600 Multimode Bond Tester

20230604

Temperature–10 °C to 50 °C (50 °F to 122 °F) Storage Temperature0 °C to 50 °C (32 °F to 122 °F) [with batteries] and -20 °C to 70 °C (-4 °F to 158 °F) [without batteries] IP RatingDesig

Dissolution Tester Device

20231012

temperature -45.00°C. (The heating temperature can be selected up to 55°C)• Temperature resolution: 0.01°C.• Water bath temperature control accuracy: 0.1 ℃.• Dissolution medium temperature