EC21 Product Catalogs - process temperature control system

Heat Alarm & Detector Test Tunnel

20241122

temperature control system, computer etc. According to the requirements of standard specifications and parameters, we use fast response thermocouples and advanced PID controller to attain the heating

YH701 Temperature and Humidity Calibration Device

20241106

Temperature control system: Heating is done using stainless steel heating tubes, which provide uniform heating and fast speed; Cooling is achieved through the use of high quality compressors, with a

Emcee Model 1150 Staticon

20240808

Control SystemThe requested conductivity level and limits are set in the Control Module (Fig. 1). The test cell in the Fuel Cell Module generates conductivity and temperature data that is passed thro

Ultrasonic Flaw Detector

20240723

process control manager, etc. Our qualified specialists strictly realize the process comprehensive supervision based on our quality process control system, which contains products design, research an

Fully Automatic Online Surface Defect Detection Equipment BQJ-D4100

20240703

control cabinet, cooling unit, air compressor, and auxiliary facilities; Adaptable rolling speed: ≤120m/s Adaptable rolling temperature: ≤1200℃ A Surface Inspection System is a technology used

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

system is adopted, which has a similar thermal expansion coefficient to most workpieces, providing an accurate and reliable length measurement benchmark, and can achieve more precise temperature corr

Digital Infrared Radiometer

20240527

Temperature -40℃ ~ +50 ℃ Dimension 279（L）* 202（H）*274（D）---RLK601、RLK602、RLK602D 368（L）* 202（H）*274（D）---RLK603 Weight 8.0Kg(RLK601、RLK602、RLK602D)/10Kg(RLK60

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation

20240524

process. Avoid gas leakage explosion caused by circuit leakage or short circuit, the equipment has self-contained gas flow size alarm device. 2. Parameter Control system single chips and push butto

Sonic Nozzle Gas Meter Test Bench

20240417

temperature, pressure, humidity, and participates in real-time error correction calculations to ensure device accuracy. The entire system achieves fully automated testing under PC control and incorpo

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

temperature compensation from 0° to 50°C for full accuracy performance.Includes NIST-traceable calibration certificate.Modules can be calibrated locally, helping to control costs.A family of 29 opt

KRD40 Zero-distance Drop Test System

20240402

Temperature range 0～40℃, Humidity≤80% (non-condensing) Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around

Reference Fuel Blender for Waukesha CFR Engine Motor

20240319

process to eliminate human error and improve the efficiency of octane/cetane testing. ◼ Safety and Real-Time Monitoring The unit is equipped with electrical protection & temperature monitoring syst

Thermal Shock Test Chamber (Two Zones)

20231013

Control system Controller Programmable controller, color LCD touch screen Communication interface RS485, USB or LAN interface (Optional according to customer’s requirements) Temperature sensor Pt

Automatic Cable Metal Wire Spring Material Universal Torsional Force Tester 5000N.M

20190815

Temperature Torsion Test Method " ASTM A938-2004 Performance Features 1. Servo motor drive, ensure the reverse speed constancy. 2. Cyclonical reducer drive, ensure driving high efficiency and stabili

200/500/1000/3000/5000N.M Automatic Metal Wire Spring Material Metal Universal Torsion Tester

20190821

Temperature Torsion Test Method " ASTM A938-2004 Performance Features 1. Servo motor drive, ensure the reverse speed constancy. 2. Cyclonical reducer drive, ensure driving high efficiency and stabili

Sobek Metallographic Tool-Makers Microscope

20180228

system CSIC infinity correction optical system Power 220V±10% ，50Hz , 0.5KW envirment requiry temperature range：22±2℃，humidity range：30%-70% optional parts 100X lens, Dark-fie

China Enviclone Programmable Walk in Large Size Salt Fog Spray Corrosion Test Chamber

20240113

Temperature ranges from -40 °C and to +80 °C.Structure and materials are PP and stainless anti-rust steel plates, with a long lifetime.Programmable controlling system, easy to operate.With efficien

Touch Screen Hot Runner Controller

20231204

M20 series touch screen hot runner temperature controllers are newly developed with latest achievement of intelligence and process control which have been well received in the hot runner temperature

Kiln Flue Gas Temperature Infrared On-line Monitoring System

20230513

online monitoring of kiln internal temperature, which provides a basis for operators to grasp the changes of kiln internal temperature in real time and improve the level of process control.

ISO 15105-2 Permeable Film Oxygen Transmission Rate Tester GBPI

20220901

process. 3)Fully-auto operation, judge and stop automatically. 4)Real time curves display of transmission, oxygen concentration, temperature and humidity, curves can be easily zoomed and moved. The

Borderline Pumping Temperature of Engine Oil Tester

20231020

temperature, (low temperature) yield stress and apparent viscosity of motor vehicle engine oil. The test temperature control range is wide from 80 to -40 ℃ . The test process is all controlled auto

Water Vapor Permeation Rate Tester Weighing Method Humidity Permeability Testing Machine

20221214

process Multiple test modes optional Temperature and humidity auto control Data curves display Computer control Environment temperature and humidity sensor inside Unit based on embedded system,24bit

Automatic Image Measuring Device

20231012

Temperature 20 ℃± 5 ℃, temperature change ＜ 2 ℃ / HR, humidity 30-80%, vibration ＜ 0.002g, lower than 15Hz Category Core components Brand Quantity Main part Base and column Shandong Taiqin

ZHLB Bell Porver

20240308

control system. Product Features 1. Temperature and pressure measurement accuracy is high, the bus real-time high-speed transmission of measured values.2. High precision position sensing detection of

LITE800 Industrial SLA 3D Printer

20230615

Systems Control Closed-loop Temperature Range 72–79 °F (22–26 °C) Maximum Change Rate 1 °C/hour Relative Humidity < 40% Machine Size (W x D x H) 1555 × 1445 × 2215 mm Machine Weight 1050 kg

Liquid Chromatograph

20240308

system controller has user-friendly design features such as a clock, thermometer, and hygrometer. Excellent performance - meeting the strict requirements of customers for instruments The detector ado

Cold and Hot Shock Test Box / Cold and Hot Impact Tester

20210424

control system: a. the controller USES color touch screen Korean 8226S Chinese and English display +PLC + temperature control module;B. Operation mode: program mode. Control object: exposure temperat

Computer Control YFTD300 Safety Valve Test Bench for Safety Valve Pressure Calibration and Seal Test

20230330

system. When being ready state, system discharge automatically, while working, system returns to normal state to effectively reduce oil temperature, prolonging life of the test bench and saving energ

DC Brushless Fan Motor Dynamometer

20240222

temperature values, which makes the result judgment more convenient and ensures the consistency of the test. 3. The test speed is faster, and the control core of the test instrument adopts ARM high-s

Automatic Melting Point Tester

20230426

system, 3 samples can be processed at a time; 2: One-key automatic detection function, effectively avoid human error; 3: PID precise temperature control; 4: Can record and playback the experiment pro

ICONE2

20200511

Temperature control is achieved using 3 type K thermocouples and a 3-term (PID) temperature controller. Split Shutter Mechanism - protects the sample area before the beginning of the test. In this wa

ElectroMechanical Universal Testing Machine

20230330

system & printer for graph, test result display, printing & data processing. Complete with modulus for metal, spring, textile, rubber, plastic and other material testing & creep test. It is widely us

Computer Controlled Electronic Universal Testing Machine

20120515

control and data acquisition system to realize full digital adjustment to data acquisition and control process. In the tensile test, it can test max. bearing tension, tensile strength, extension defo

ST Portable BDV Oil Test Kit,Oil Dielectric Strength Tester

20210224

process easy to control. 6.With overvoltage, overcurrent, limiting protection, in order to ensure the safety operation. 7.With a temperature measurement display function and system clock display. 8.S

V-Sorb 2800TP Surface Area and Porosimtery Analyzer

20240118

control system with temperature probe, ensure the coolant level unchanged when compares with sample cells in the whole analysis process, completely eliminate the analysis errors caused by dead volume

High Low Thermal Shock Test Chamber Temperature Test Equipment

20160523

temperature chamber, the low temperature chamber and the testing chamber. The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has bee