EC21 Product Catalogs - specified

Seam Stripper

20250106

specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand.

Walk in Temperature Humidity Test Chamber

20240624

specified parameters Power supply AC 380V, 50Hz, three-phase four-wire + earth wire *Note: temperature range -20℃~+100℃: TH2**HD series; temperature range -40℃~+100℃: TH4**HD series; temperat

ST-9605 Oxygen (Air) Bomb Ageing Oven

20240615

specified pressure and temperature). Technical parameters： Maximum pressure: 2.5MPa Safety blow-up pressure: 2.7~3 MPa Pressure gauge: 0~4MPa,minimum scale 0.02Mpa Temperature controlling range: RT

IEC61180-1 1.2/50us Impulse Voltage Generator

20240528

IEC61180-1 1.2/50μs Impulse voltage Generator1. IntroductionThe impulse voltage generator generates a 1.2/50μs standard lightning-impulse specified in IEC61180-1 and IEC60060-1. It is to verify the

Digital Infrared Radiometer

20240527

control, data processing and product calibration Option Tripod, laptop (common/reinforced), filter: 3.0-5.0um、 8-14 um or user specified · IRIG-B(DC) or IRIG-B(AC) time code signal input

Fluke 1587 FC Advanced Electrical Troubleshooting Kit

20240422

specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)Relative humidityNoncondensing0 % to 95 % 10 °C to 30 °C(50 °F to 86 °F)0 % to 75 % 30 °C to 40 °C(86 °F to

Drop Test Machine

20240416

specified surface from a specified height. The second procedure simulates repeated falls that may occur to such devices as connectors or small remote control units which are normally attached to cabl

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

Specification: The 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable

Gradient Heat Seal Tester for Flexible Packaging High Efficiency Heat Sealer in Lab Testing Machine

20240325

specified time. Upon completion, the upper sealing jaw returns to its original position, concluding the heatsealability testing process. Heat Sealing Evaluation Heat sealability is further assessed b

Automatic Safety Test System

20230907

specified, and the test should be performed. It is not possible to use a fixed voltage, reset-start method for testing. In the AC circuit, it is equivalent to the resistance in the DC circuit. […mo

NAYD Series Oil Gas Dry Type Testing Transformer

20180827

specified voltage dielectric strength test, the insulation level of assessment products found to be defective insulation test to measure the ability of withstand over-voltage. Also called name High

Automatic Safety Test System

20240102

specified, and the test should be performed. It is not possible to use a fixed voltage, reset-start method for testing. In the AC circuit, it is equivalent to the resistance in the DC circuit. […mo

Tensile Tester Free Falling Dart Impact Tester Impacting Test

20220301

Product Details Application: For the determination of the energy causes the plastic film to fail under specified conditions of impact of a free-falling dart. Features: 1. Our own patent technology.

Crease Bend Tester

20180628

The Crease Bend Tester is used to monitor scoring equipment to ensure box performance, by measuring the bending resistance of creased board at the time of folding at the crease. It measures the maxim

Water Boiling Test for Laminated Glass

20230719

specified period of time and inspect bubbles and others defects Apparatus: 12) The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on

Reliable and Good Servo System Carton Compression Testing Machine Boxes Tester

20210424

specified)5. Compression speed standard: 0.01-300mm/min, set at will6. Screw: ball screwWeight :(optional)Under 0.01mm8. Accuracy of deformation indication: better than ±1.0%9. Shutdown mode: upper

YFT-D300 Pressure Relief Valve Test Bench for Safety Valve Pressure Calibration and Sealing Test

20230330

specified requirements, the oil pump automatically stops working.6. The air filter should be checked from on-work time to off-work time every day. The discharge hole on the pipeline air storage tank

UL746A Tracking Index Test Device

20210805

specified droplet volume in fixed height (35mm) for 30s to evaluate the resistance of the surface of solid insulating materials under the combined action of electric field and contaminated medium, an

Fully Automatic Insertion and Extraction Force Tester

20231012

specified by the customer with header and LOGO; 9. The inspection report can be transferred to. WORD for editing; 10. The contents of the inspection report header can be modified at any time (both in

Multi-Drug Test Cup

20240226

Multi-Drug Test Cup Description: Multi-drug Test Cup is a rapid, screening test for the qualitative detection of multiple drugs and drug metabolites in human urine at specified cut off levels. For pr

FTT-01 Film Thickness Tester

20240202

specified dimensional requirements for its intended application. FTT-01 Thickness Tester enables manufacturers to ensure a uniform and high-quality product, optimize material usage and reduce expense

Walk-in Climatic Test Chamber

20240117

Our Walk-in Climatic Test Chamber can be used to test the effects of specified environmental conditions on biological items, industrial products, materials, and electronic devices and components. I

Used Olympus Nortec 600D Eddy Current Flaw Detector

20230604

specified procedures, as well as those used by many other equipment manufacturers. Standard impedance plane view, sweep mode (strip chart), split screens, adjustable null point, crosshairs, improved

TJH-2C Parallel Beam Load Cell

20220624

The product is adjusted at the four corners to ensure that it outputs consistently at all points in the specified load plane. Suitable for packaging scales, platform scales, electronic belt scales, b

ST-7603S Cable Bundle Flame Retardant Test Chamber

20180420

specified conditions Main components: Testing chamber, electric control system, air source, ignition source flew control system (propane gas and air compressed gas), steel elevator, Fire extinguishi

SAW Pipe Real-time Inspection System

20140520

Industrial RTR System SAW Pipe Real-time Inspection System This system is specified for the online inspection of spiral/longitudinal SAW pipe (max diameter 2400mm, max length 16.5m). System configura

100k - 10T Micro Signal Type Tester Resistance Capacitance and Inductance Tester

20240119

specified capacitance values and other performance criteria, maintaining consistent quality and reliability.FeaturesTest voltage range: 1-1000V(TH2683A),1-500V(TH2683B)Insulation resistance test rang

Ozone Test Chamber,Ozone Colorfastness Tester AATCC 109 ISO 105 G03 ASTM D1149

20200216

specified time and the standard graphics card comparison. To determine the resistance of the color of textiles to the presence of ozone in the atmosphere at room temperature with relative humidity

BEKK Smoothness Tester

20120619

specified conditions of contact. The smoothness of a wide range of papers and boards may be measured by this method and it is especially recommended for smooth papers and boards. However , for very s