EC21 Product Catalogs - statics

ST-6608 Static Force Test Machine

20240614

ST-6608 Static Force Test Machine Standards: According to UL817: 2007, UL1310: 2001, UL697: 2004; Scope: Applies to check the power plug cables for security of conductor test, Security of blades or p

Lt-JJN01 Computerized Five-Jaw Office Chair Foots Static Pressure Test Machine

20210410

Technical parameters 1. Maximum tension LOAD: 2000KG, 5000KG optional2. Resolution: 1/100,000, accuracy level 0.53. Unit switching: all kinds of international common units can be arbitrarily switched

Megger S1-1068 10kV Insulation Resistance Tester, Digital/Analog

20250226

static discharge areasLightning strike possibility, i.e., lightning conductorsFurthermore, the S1-1068 offers the engineer the ability to conduct timed tests, polarisation index (PI), dielectric abso

Heat Alarm & Detector Test Tunnel

20241122

Equipment Function ： The heat alarm & detector test tunnel is used to test directional dependence, static response temperature, response times test for fire alarm and detector. The equipment meets

Ozone Aging Test Chamber

20241114

Lenpure Ozone Aging Test Chamber Can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulating bush; expose the test specimens

PHONEFIX W23 Universal Battery Fixture for Spot Welding Machine

20240907

DescriptionPHONEFIX Professional Edition Battery Spot Welder Anti-static Welding Fixture for Mobile Phone Battery Repair. Universal Battery Spot Welder Fixture Digital display battery spot welding ma

EMCEE Model 1153 Digital Conductivity Meter

20240813

static charge. Static charges are induced, especially, when the fuel is pumped at high rates through filters. Due to the relatively low conductivity, the static charge does not readily dissipate and

Sell Electronic Tensile and Compression Testing Machine

20240803

Sell Electronic Tensile and Compression Testing Machine This machine is applied in analysis and research of statics property testing of tensile, compression, bending, cutting, holding and other items

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

static pressure floating guide rail composed of self-cleaning pre load high-precision air bearings. The bearing has a large span, strong resistance to angular swing, low resistance, no wear, and smoo

Smart Electricity Distribution Network Monitoring System

20240520

Static power loss: ≤10μW Action principle Short circuit detection principle: According to the phenomenon of short circuit,the current break when short circuit happen, the action on the basis of th

Digital Test Hammer

20240430

Measuring ranges 10-70MPa Impact energy 2.207±0.1J（0.225Kgf.m) Length of spring stretch 75±0.3mm Tension spring stiffness: 785 N/m The static friction of pointer slider 0.65N±0.15N Radius of sph

Integrated X-ray Digital Imaging System

20240422

This product has a small size, a high degree of integration, reliable function, definite images, ease to operation, and a humanized design. The product is applicable for static and dynamic nondestruc

Coefficient of Friction Tester ASTM D1894 Plastic Friction Coefficient Tester Paper Friction Testing

20240325

Coefficient of Friction Tester COF-01 is for the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-pl

Pull Tester / Tensometer Utm Material Tester / Tensile Load Testing Machine 10kg

20180810

Application of equipment This machine is applied in analysis and research of statics property testing of tensile, compression,bending, cutting, holding and other items of metal and nonmetal material

10kg 100N Metal Material Universal Tensile Compression Bending and Shearing Testing Equipment

20190821

Application of equipment This machine is applied in analysis and research of statics property testing of tensile, compression,bending, cutting, holding and other items of metal and nonmetal material

Dynamic Testing Machine

20230330

The machine is mainly used for the dynamic and static mechanics performance tests to material and parts, equipped with corresponding accessories, it can do tensile, compression, low cycle and high cy

NDW-500 Computer Controlled Torsion Testing Machine

20120515

static mechanical properties test for metallic, nonmetallic materials and various construction member, like transmission shaft and semiaxis; 2) Adopting horizontal structure, computer screen display,

Coefficient of Friction Test for Electrochemical Aluminum Membrane/ Plastic Belt COF

20221214

static coefficient and dynamic coefficient, especially used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions. Coefficient of Fricti

Dual Lens Borescope

20160715

Static) 320(H)*240(V) Field of View (FOV) 55° Depth of Field (DOF) 2 cm~ 6 cm Light source 4 LED (OD 5.5mm) Number of Lamps 4 Lamp Output 4200 Lux at 20mm Tip Operating Temperature -20 º to

Coefficient of Friction COF Tester Testing Equipment

20180626

IDM’s Coefficient of Friction Testers have proven to be a fast, reliable and accurate method of determining coefficient of friction. Our range of COF Testers are used to determine the static an

NiRun Viscometer for Sale

20200310

viscometer for sale 1.5 inch screen with rich information:easy to operate 2.Anti-static shell and PC lifter 3.RTD temp probe(optional) 4.ARM chip processor:higher data processing speed 5.New designed

Electronic Universal Testing Machine

20211029

Ⅰ Name and type of equipment CMT-50 Microcomputer control electronic universal testing machine Ⅱ Application of equipment This machine is applied in analysis and research of statics property test

Piston Automatic X-ray Radiation Inspection System

20140520

Static system sensitivity: 1.5-2.0% Dynamic system sensitivity: 3-4% Speed (13 inches): 45s /set (XYD1604C) 70s /set (XYD1604) Whole size: 7m×4m×2.5m Standard P. R. China JB473094AB USA A

Standard Portable Pendulum Skid Resistance and Friction Tester( Skid Tester for Civil)

20230530

static pressure on pavement: 22.2±0.5kN 4, weight of rubber slider: 16g5, Overall weight approx: 30-40Kg 6, package: aluminum carrying case 7, Dimension of package (mm): 740 × 710 × 210 Standard d

Ozone Test Chamber,Ozone Colorfastness Tester AATCC 109 ISO 105 G03 ASTM D1149

20200216

static stretching +3 groups of dynamic tensile(Optional); 9.Attached sample holder. TECHNICAL PARAMETERS Model TN1418 Ozone range 0-1000 ±2% pphm Temperature 0 °C to 95 °C±1.0 ℃ Humidity (30-9

Pressure-composition-temperature Equipment

20240118

static volumetric principle to determine adsorption and desorption isotherms under high pressure (atmospheric to 200Bar) and high temperature (atmospheric to 500℃) with a stainless steel VCR manifo

TY-20MJ Portable Needle Detector

20150504

Suitable for textiles, knitgoods, crafts and costumes. Product info Battery: 6F22-9V Static current: <5mA Working current:<30mA Weight: 280g Dimensions: 135x65x35mm http://www.inteke.com

Enviclone IEC 62782 Photovoltaic Modules Solar Panel Cyclic Dynamic Mechanical Load Test Machine

20240111

Description enviClone Dual Static and Cyclic (Dynamic) Mechanical Load Tester or Testing Machine is a specially designed for IEC61215 standard MQT16, MQT20 clauses and IEC 62782 to test impact resist

3-Zone Thermal Shock Test Chamber

20240117

a test zone. The test product is statically placed in the test zone, and the air door is controlled to switch between the high and low temperature zones to achieve the effect of thermal shock.

Liquid Chromatograph

20240308

Static noise ≤ ± 0.5 × 10-5AU (empty pool, response time 1 second, 20 ℃) Dynamic baseline drift ≤ ± 1 × 10-4AU/h (methanol, 1ml/min, 254nm, 20 ℃) Static baseline drift ≤ 0.5 × 10-4 (em

China MIL-STD-810H Military Standard Dual Blowing Dust Sand Proof Resistance Test Chamber Machine

20240114

static protection. Controller: programmable, touchscreen, easy to set test values. To control and display Temperature, Humidity, Wind Speed, Dust Concentration, Test Time, etc. It displays Set Value

Toughened Glass Shelves

20230822

static pressure loads than regular glass. 3. The heat resistance of toughened glass products is Three times that of ordinary glass, tempered glass panels could bear the temperature change around 200

ESD Simulator Guns

20240102

ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. What i

Coefficient of Friction Tester

20231016

static agents, inks, varnishes, and adhesives, can influence the coefficient of friction. Application The COF-01 Coefficient of Friction Tester is designed to measure both static and kinetic coeff