EC21 Product Catalogs - technical parameter

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

Technical parameters: Product Name Customized 0-100A Marine analog panel ammeter Function Used for measuring AC/DC current measurement Overshoot Less than 20% when scale reaches to 2/3 Insulation Cir

0.8-8GHz Precision 4 Way Power Splitter Power Divider with SMA Connector

20241204

Technical Parameter: Parameter Min. Typ. Max. Frequency Range（G Hz ） 2 — 8 Insertion Loss（dB）（With distribution ratio ） 2.4-2.5GHz -- 6.5 6.8 5.7-5.9GHz -- 6.8 7.2 Isolation（dB） 20

Three-box High and Low Temperature Alternating Test Chamber

20241112

conditions measured2、The above parameters are for reference only, and can be customized according to user-specific test parameters.3、This technical information, subject to change without notice

New BEL M124A Laboratory Balance - 120g - 0.1mg

20241028

New BEL M124A laboratory balance - 120g - 0.1mg New equipment in its original packaging Technical parameters: Precision balance reference M124A Readability: 0.1 mg (10-4 g) Maximum capacity: 120 g Re

Hot Sale DN200 Portable Pneumatic Safety Relief Valve Test Bench for Flanged Valves

20241007

Technical parameters: Pressure range 0-320 bar for option(gas pressure and water pressure) Test medium air, nitrogen, water Test valve diameter DN200 Pressure control accuracy Less than 1%F.S Pressur

Dissolved Ozone Meter Intelligent Online Water Ozone Analyzer Tester Sanitizer Ozone

20240929

Technical Parameters ◇ Protection GradeIP65 (waterproof, dust-proof and damp-proof)◇Measuring range ozone 0-20.00 mg/L(ppm), temperature:0~60℃◇Resolution0.01mg/L, 0.1℃◇Accuracy ±1% or ±

Portable Hardness Tester

20240925

parameters. With EL background light. ● Large capacity memory could store 600 groups information. ● Data Software to connect with PC via USB port. Micro printer support ● Software calibration f

Electro-hydraulic Servo Universal Testing Machine Usage Tensile Tester/Compression Tester

20240803

Electro-hydraulic Servo Universal Testing Machine Usage Tensile Tester/Compression Tester Main Technical Parameters: Model WAW—2000B The Maximum test force (KN) 2000KN Measurement span The whole do

Fully Automatic Online Surface Defect Detection Equipment BQJ-D4100

20240703

technical parameters: V/51000 (V is rolling speed) At 10m/s: 0.2mm At 50m/s: 0.4 mm At 100m/s: 2mm Minimum lateral defect (mm): 0.045 Minimum depth defect (mm): 0.25 The standard configuration of the

Walk in Temperature Humidity Test Chamber

20240624

Walk in temperature humidity test chamber Technical specifications: Model TH780HD TH7160HD TH7200HD Volume 8 m3 16 m3 20 m3 Internal dimensions (D*W*H) 2*2*2 m 2.6*2.8*2.2 m 3*3*2.2 m External dime

Sand and Dust Test Chamber

20240619

Technical parameter: Model HD-500 HD-800 HD-1000 Volume 512 L 800 L 1000 L Internal dimension (D*W*H) 800*800*800 mm 900*900*1000 mm 1000*1000*1000 mm Performance Metal screen standard spacing 50

ST-6608 Static Force Test Machine

20240614

Technical parameters: Test workstation: 6 groups of specimens; Weight: 2Lb, 5Lb, 8Lb & 10Lb, each 6pcs and portfolio stackable the weight suitable difference specimen for testing; Support tray travel

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear,

20240531

Technical Parameters Model 30 45 65 80 100 120 Tested gear module（㎜） 0.7～15 0.7～20 0.7～20 1～20 1～20 1-40 The maximum outer diameter of the tested gear（㎜） 300 450 650

Smart Electricity Distribution Network Monitoring System

20240520

Technical Parameters Applicable voltage grade: U≥6-35KV Applicable wire current: I≤1200A Applicable wire diameter: 16mm sq≤D≤240mm sq Action response time: 0.06s≤t≤3s Reset time: 6,12,24,

Multifunction Strength Tester

20240430

technical parameters Maximum pullout force of the detector 40kN Work the piston stroke 10mm Chassis fulcrum diameter 120mm Minimum reading: 0.01kN Indication error: Less than ± 2% F.S Weight: 4kg

Microfocus X-ray System

20240422

technical parameter ●　Micro-focus X-ray source ●　Tube voltage range:20kV～160 kV ●　Tube current range: 0.1 μA ~100mA ●　Focus size:1μm, 5μm, 30μm ●　High resolution:70 LP/cm

KRD20 Factory Direct Sell Bump Test Machine for Mechanical Impact Testing

20240402

Technical Specifications Model Parameters KRD 20－50 KRD 20－100 KRD 20－200 KRD 20－500 KRD 20－800 KRD 20－1000 KRD 20－1500 KRD 20－2000 KRD 20－3000 Load (kg) 50 100 200 500 800 1000 150

Vacuum Leak Tester for Packaging Plastic Bag Heat Seal Strength Leakage Tester ASTM D3078 Tester

20240325

parameters. Sustaining the reliability of package seals is imperative to uphold the standards of product quality and safety. Leak Tester Testing Process The Leak Tester operates by immersing the samp

Leak Tester

20231101

Parameters Test Range 0~-90 KPa Chamber Acrylic Cylinder Shape Test Space Φ270*H210mm (Inside Usable) Compressed Air 0.7MPa (Prepared by user) Power 110~220V 50/60Hz Technical Features 1) PLC-contr

UTM / TTM / Tensile Testing Machine / Lab Test Equipment 10 Ton

20190815

parameters automatically and can also do test and provide data according to GB, ISO, DIN, ASTM, JIS and other international standards. Main technical parameters (1)Measurement parameters 1. Maximum t

Tensile Testing Machine Usage Steel Bar Striking Point Gauge Meter

20190821

technical parameters: Item/Model DB-30 DX-5 DX-400 DX-300 Control manner electric manaul manaul manaul Point space 5mm/100 adjustable 10mm striking point number each time single point 40 30 longest g

Heating Oil Bath Series

20170216

Technical Parameters: Capacity(L) 10 pressure 1.45MPa Temperature contro error <=2.50% Highest Temperature 260 power 1.5KW Temperature <=2.5ºC Heating Power(W) 2000 Flow rate 18.3L/min Humidity

Plastic Moisture Analyzer

20161204

technical parameters NameMoisture analyzer ItemZB-SF105MW PowerAC220V±10% 50HZ Measuring range0-110g Weighing precision5mg Heating temperature range40-199 DEG C Temperature sensorPT-100

NAVLF Ultra-low Frequency High Voltage Generator

20180827

technical conditions, Part 4: ultra-low frequency high voltage generator general technical conditions" power industry standard, easy to use. Nowadays home and abroad adopted mechanical approach to pr

Lab Plastic Film ISO8295 ASTMD1894 Coefficients of Friction Tester

20220913

Parameter: Item Technical Parameters COF test range 0.01~0.999 Precision ±0.01 Force range 0~10N Sliding speed 100±10mm/minute Slider size 63mm × 63mm Slider weight 200±2g Sliding platform size 2

Borderline Pumping Temperature of Engine Oil Tester

20231020

Technical Parameter 1. Applicable standards: ASTM D3829, ASTM D4684 2. Refrigeration method: compressor refrigeration 3. Working temperature: 80～-40℃ 4. Temperature control accuracy: ±0.02

CCD Spectroradiometer Integrating Sphere Compact System

20240102

parameter in lighting design and evaluation, as it reflects the brightness and effectiveness of a lighting system. To accurately measure lumen output, a spectroradiometer system with an integrating s

HSL-6001 Heat Seal Tester

20210625

Heal Seal Tester Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL

Testing Equipment for Glass in Building

20230719

Technical Parameters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric R

High-End Full Automatic Touch Screen Transformer Oil Dielectric Strength Tester

20180416

parameters of transformer oil, it is a rule of the voltage withstand. The value of breakdown voltage (dielectric strength) indicates whether the oil contains water, impurity and electric particles, a

Horizontal Type Valve Pressure Test Bench

20220509

Technical parameters: Valve Nominal Diameter DN 300-800mm(straight-through Flange connection valves) Maximium Test Pressure PN 31.5Mpa(4500LB) Max Nominal Voltage Exchange 380V Rated Power 8.5KW Line

CO/CO2/SO2/NO Analyzer

20210621

Technical Parameter Accuracy: ≤±1% FS Main Index: Zero Drift: ±1% FS/7d Span Drift: ±1% FS/7d Linearity Error: ±1% FS Repeatability: ≤± 1% Response Time: ≤15S (T90) Power: ＜80W Work Po

Automatic Vicat Tester Cement Mortar Vicat Needle Apparatus

20230613

and prompt the operation; >DATA REPORT STORAGETest data is automatically made into charts and stored; there are RS485 communication, USB export and other interfaces; TECHNICAL PARAMETERS

DC Motor Armature Testing Equipment

20200324

Technical parameters Type AIP898X series Display 10.4” LCD Number of commutator 3-128 bars Bar to bar resistance Range 0.5mΩ-500Ω Precision ≤±0.5% measuring range +3 words Welding resis

Photocatalytic Xenon Lamp Light Source Photocatalysis Photocatalytic Visible Light UV Light

20240104

Technical Parameters CEL-PF300-T6 CEL-PF300UV300-T6 Output light Power 10~20 Sun(1Sun=1000W/m2) 10~20 Sun Spectral Output(nm) 300nm~2500nm（ozone free） 200nm~2500nm（ozone） Beam Diameter >=60mm

Computer Servo System Double-Column Tensile Testing Machine

20210423

Technical parameters 1. The maximum tension stress LOAD yuan LOAD: 10 kg, 20 kg, 50 kg, 100 kg, 200 kg, 500 kg, 1000 kg, 2000 kg2. Unit switching: all kinds of international units can be arbitrarily

PLC Control with Crane Device YFT-A300 Impacting Type Hydraulic Valve Test Equipment

20230330

technical parameters and sizes Schematic diagram Product configuration Certification and Patents Showroom China Pump & Valve Exhibition Packing & Delivery Cooperation with overseas friends FAQ

Gelbo Flex Durability Tester

20231016

Technical Features The system features PLC control with an intuitive HMI touch screen interface. It offers five standard test modes and includes four test stations. Users can quickly switch betwe

IEC61180-1 Impulse Withstand Voltage Generator with 1.2/50us Waveform

20210805

Technical Parameters: 1) Open output voltage: 12KV (max)±5% 2) Frontier time: 1.2μs ±30% 3) Half-value time: 50μs ±20% 4) Output polarity: positive, negative, positive/negative automatically 5)

Automatic Image Measuring Device

20231012

Technical specifications model QT-5040 Stroke（mm） 500 *400*200 Overall dimension （mm） 825*1077*1280 Worktable （mm） 660*560 Overall weight (kg) 420 Glass load (kg) 20 Z-axis lifting distan

Package Large Scale Simulation Transportation Vibration Tester

20230727

Technical Parameters: ModeAS-100AS-200AS-300AS-600 AS-1000 Load (Kg)1002003006001000Effective Area WxD (mm)1200×10001200×10001200×13001300×14001500×1500 Weight (Kg)200250350450600External Dimens

Multi-channel Multi-function Intelligent Temperature and Humidity Itinerant Detector

20221209

parameters such as sensor type and range ▶ Support the editing and configuration of sampling-related parameters such as sampling time and sampling interval ▶ 24 channels can be independently cali

Manifold Filtration Device

20230721

Technical Parameter Volume of PP Funnel: 270ml Scale of Funnel: 50, 100, 150, 200, 250ml with annular scale line Membrane Diameter: 47mm and 50mm Effective filtration area: 12.5 cm2 W x H: 105mmx135

Computer Controlled Automobile Seat Testing Machine

20120515

technical specifications. l After tensile test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime d

TJH-2C Parallel Beam Load Cell

20220624

Technical Parameter Rated Load 0.5~10 kN Comprehensive Precision 0.02~0.05% FS Sensitivity 2.0 mV/V Creep ±0.02% FS/30min Zero Output ±1% FS Temperature Effect On Zero ±0.02% FS/10℃ Temperature

Temperature Rising Tester

20170521

Technical parameters: Power: 1200VA Test current: 0~50A, between range can be adjusted; Test voltage: <12V; Temperature range: 0~200℃ Temperature recorder: 16 channels smart temperature detector ci

18650/32650/21700 Battery TESTER 1-24s 32 Series Bms PCB Testing Machine High Accuracy Bms Tester

20231007

Technical parameter : No. Item Parameter Accuracy 1 Power supply AC220V/50Hz 2 Power 800W 3 Max overcurrent 60A or 120A optional 4 Test series 1-24 series configurable 5 Voltage reference Ternar

WASP-XM-R-SF6 Pump-priming Portable SF6 Gas Detector

20170411

Technical Parameter Sensor type NDIR Sampling way Pump type Test range 0-1000ppm/2000ppm/3000ppm Resolution 1ppm Precision ±2%FS Response time <20s Indicate way LCD display real-time concentra

High Purity Gas Generator, Hydrogen Generator, Nitrogen Generator

20240307

Technical parameters of high-purity gas generator for gas chromatographs: Technical parameters: high-purity hydrogen, high-purity nitrogen Gas purity (%)>99.999 Output flow rate (ml/min) 0-300 0-500

Cupping Testing Machine

20211028

technical parameters 1. The maximum of testing force: 100kN 2. Measuring range: 0.2kN ~ 100kN 3. Testing accuracy: ± 1% 4. Testing speed: 2 ~ 100mm/min (any constant rate and speed control) 5.