EC21 Product Catalogs - technical processing

Custom Optical Grating Replication Service | OEM Grating for Spectrophotometers

20260420

Process Submit Your Requirement: Send master grating, technical drawing or optical specifications. Feasibility & Quotation: Evaluation and quote provided within 2-3 working days. Production: Grating

YH800B Precision Digital Pressure Calibrator

20241105

technical features and functions, details as follows: 1. Compliance with national verification regulations: The design and performance of this instrument comply with relevant national verification st

Multi Channel Ultrasonic Flaw Detector

20240723

Multi Channel Ultrasonic Flaw Detector Introduction The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband

Fully Automatic Online Surface Defect Detection Equipment BQJ-D4100

20240703

technical parameters: V/51000 (V is rolling speed) At 10m/s: 0.2mm At 50m/s: 0.4 mm At 100m/s: 2mm Minimum lateral defect (mm): 0.045 Minimum depth defect (mm): 0.25 The standard configuration of the

Sand and Dust Chamber

20240624

Sand and dust chamber Sand and dust test chamber is used to do testing with destruction of samples when exposed to sand and dust, and allow to test the tightness of the products. Technical specificat

Shortwave Infrared SWIR TEC Cooled Thermal Camera with InGaAs Detector for Target Measurement

20240620

Technical Indicator SWIR Cooled Thermal Imaging Module Technical indicator Primary cooling (SIRS02) Secondary cooling (SIRS03) Fully China Made (SIRS04) Performance indicators Prober material InGa

Smart Electricity Distribution Network Monitoring System

20240520

technical means for find the hidden permanent fault point; Shorten the search time to find the fault point, reduce the labor intensity of line patrol person; Defining the responsibility of the fault

Microfocus X-ray System

20240422

Main function of image processing system： ●　3D imaging, real-time imaging magnify and shrink. ●　Precise measurement of the curve and statistics ●　Inspection for the angles, semidiamete

Automatic Image Measuring Device

20231012

Technical specifications model QT-5040 Stroke（mm） 500 *400*200 Overall dimension （mm） 825*1077*1280 Worktable （mm） 660*560 Overall weight (kg) 420 Glass load (kg) 20 Z-axis lifting distan

Multi-channel Multi-function Intelligent Temperature and Humidity Itinerant Detector

20221209

technical indicators Range Measuring range Resolution ratio Accuracy Number of channels Remarks 100mV-20mV~100mV0.1uV0.01%RD+4uV24Configuration400Ω0Ω~400Ω1mΩ0.01%RD+0.005%FS24The 1mA excitation c

Gradient Heat Seal Tester for Flexible Packaging High Efficiency Heat Sealer in Lab Testing Machine

20240325

Technical Features 1. Both upper and lower jaws, constructed from aluminum, are independently heated to minimize heat loss during sealing, ensuring temperature uniformity. 2. Equipped with a first-cl

Sweating Guarded Hotplate

20160615

Technical Specifications of Thermal resistance wet resistance tester Thermal Resistance(RCT) range: 0.002~2.000m2·K/W; Indication error ≤ ±2%; Repeatability error ≤ ±2%; Re

UTM / TTM / Tensile Testing Machine / Lab Test Equipment 300kN (WAW-300B)

20190815

processing and printing, the test can be carried out highly effective in accordance with national standard of GB228-2002, the sample folder adopts hydraulic chuck; it is easy to operate, safe and rel

CSL-Y Charpy Impact Specimen U V Notch Broaching Machine

20190821

Technical Parameters: Model CSL-Y Gap in the shape of the specimen V-or U-(2mm) Processing the sample size 10*10(7.5 or 5)*55mm Cutting mode electric cutting speed 2.5m/min Broach stroke 350mm Broa

Plastic Moisture Analyzer

20161204

technical parameters NameMoisture analyzer ItemZB-SF105MW PowerAC220V±10% 50HZ Measuring range0-110g Weighing precision5mg Heating temperature range40-199 DEG C Temperature sensorPT-100

LITE800 Industrial SLA 3D Printer

20230615

Technical Data Build Volume 800 × 800 × 550 mm 31.5 × 31.5 × 21.7 in Accuracy Dimension <100 mm: ±0.15 mm Dimension ≥100 mm: ±0.15% x Dimension Layer Thickness 0.07-0.25 mm Laser 355 nm, soli

NAVLF Ultra-low Frequency High Voltage Generator

20180827

technical conditions, Part 4: ultra-low frequency high voltage generator general technical conditions" power industry standard, easy to use. Nowadays home and abroad adopted mechanical approach to pr

Gas Permeability Tester Gas Transmission Rate of Plastic Package/Flexible Packaging

20221214

Technical Indexes Test Range 30～60,000 Gurley seconds（Standard） 0.0021～200um/Pa.s（Standard） 300～60,000Gurley seconds（Optional） 0～60,000 Gurley seconds（Optional） Resolution 0.

Liquid Chromatograph

20240308

Technical indicators High pressure constant current infusion pump Infusion method: Micro volume series double plunger Maximum infusion pressure 0-9999Psi Flow setting range: 0.001~9.999ml/min (adjust

CO/CO2/SO2/NO Analyzer

20210621

Feature 1. Advanced Digital Processing Technology 2. Measuring Output display linearly 3. Multiple Signal Output: Sound, Light, Image, Relay and Message 4. Combine into one set instrument with other

100k - 10T Micro Signal Type Tester Resistance Capacitance and Inductance Tester

20240119

Technical ParameterWorking Humidity10℃～40℃≤90%RHPower Requirement90～121V AC (60Hz)or 198～242V AC (50Hz)Power50VAVolume235mmX104mmX360mmWeight3.6kg AccessaryStandardAccessories nameModel T

Automatic Melting Point Tester

20230426

Processing capacity: 4 pieces/batch (four samples can be made at the same time) Power supply: 220V 50HZ power: 120W. 3. Automatic Melting Point Tester Feature 1: With refrigeration system, 3 samples

DC Motor Armature Testing Equipment

20200324

Technical parameters Type AIP898X series Display 10.4” LCD Number of commutator 3-128 bars Bar to bar resistance Range 0.5mΩ-500Ω Precision ≤±0.5% measuring range +3 words Welding resis

KRD61 6-DOF Motion Simulator Test System Simulation Table

20240402

processing industry, it can be made into six-axis linkage machine tools, smart robots, etc. l It can realize posture simulation, sine wave simulation, single-DOF motion, and multiple-DOF composite m

Embed Sterility Test Pump

20230721

Technical feature1. SS304 material, easy to clean and disinfection.2. Drain tray can be hung on or lay on the table. When hung on, more than 180 degree angle for choice to meet the demand for differe

Hand Held Lube Oil Quality Analysis Kit

20230106

process only takes 10 seconds to detect oil pollution degree.The analyzer has main features:rapidly test,date query,curve analysis,network sharing etc. Technical Specifications: 1、Display Range:0-1

WEW-G600/1000 Steel Strand UniversalTesting Machine

20120515

process and test results can meet the standard requirements. 7.Perfect protection function. âÂÂÂÂÂÂ¡. Main technical parameter: type & spec. WEW-600G

Hot Sale Furniture Mechanics Comprehensive Test Machine

20210416

Technical parameters 1. Load capacity: 200kg, 500kg (force value can be set) 2. Accuracy of load element: 3/10000 3. Test accuracy: static: ± 2%; dynamic force: ± 3% 4.Electric cylinder and cylin

Computer Control YFTD300 Safety Valve Test Bench for Safety Valve Pressure Calibration and Seal Test

20230330

process in digital and image curve and more accurate set pressure value can be captured to print out the testing monitoring graph, which can be used as technical document archive. 5. "Safety door" de

Carbon Dioxide Volume Tester

20231016

Technical Features 1.This unit is under precise PLC control (at an industrial-grade stability level) and operated through an HMI touch screen interface. 2.Agitating the sample bottle is achieved u

ST3007 Digital Measuring Projector

20180729

ST3007 DIGITAL MEASURING PROJECTOR (Reverse image) Technical Parameters: Worktable Metal dimension (mm) : 260×152mm Glass dimension (mm): 125*100mm X-axis travel: 75mm Y-axis travel: 50mm Z-axi

WASP-XM-R-SF6 Pump-priming Portable SF6 Gas Detector

20170411

Technical Parameter Sensor type NDIR Sampling way Pump type Test range 0-1000ppm/2000ppm/3000ppm Resolution 1ppm Precision ±2%FS Response time <20s Indicate way LCD display real-time concentra

Electronic Universal Testing Machine

20211029

technical parameters (1) Measurement parameters 1. Maximum test force: 50KN 2. Accuracy class: 0.5 3. Measuring range of test force: 0.4%～100%FS （full scale） 4. Indicating error of test force:

Model CLG-160 Aluminium Wheel RTR System

20140520

Technical parameter Max penetration: 110mm (AI) Space resolution: 2.4-2.8lp/mm Real time static sensitivity: 3.0% Sensitivity after processing: 1.5-2.0% Speed (13 inches): 45s/set Whole size: 7m*4m*2

BST-01 Ampoule Breaking Tester

20231101

Technical Features BST-01 Ampoule Breaking Strength Tester is a highly versatile and advanced piece of equipment with a wide range of applications in the pharmaceutical and medical sectors. Its tech

Thermal Shock Test Chamber (Two Zones)

20231013

processes, and greatly improve product reliability. Thermal shock chamber is playing an increasingly important role as a standard tool for quality improvement. Technical parameter: Model HD-CTS2-01

Horizontal and Vertical Flammability Tester UL94 IEC 60695

20170530

TECHNICAL PARAMETERS 1.Burner: single gas Bunsen burner ( inside diameter Φ9.5 ±0.3 mm) and mixed gas Bunsen burner (diameter Φ 12 ±0.3 mm) 2.Test Angle: 0 °, 20 °, 4

Fluxmeters Electromagnetic Flux Meter Price Magnetic Flux Flow Density Meter

20230522

Technical index 1. Test range: ± 3.0000mWb \ ± 30.000mWb \ ± 300.00mWb \ ± 3000.0mWb four levels (can be changed as required); 2. Corresponding input impedance: 1k ohm, 10k ohm, 100k ohm, 1000k o

Laboratory Film Pharmaceutical Lab Instruments Oxygen Permeability Tester GBPI

20220901

Technical parametersTest range 0.02~16500 cm3/m2·24h（Film）With mask can be 260000 cm3/m2·24hTest Accuracy 0.001 cm3/m2·24hTemperature range 15~45℃(5~50℃optional ）Temperature accuracy ±0

Borderline Pumping Temperature of Engine Oil Tester

20231020

process is all controlled automatically by computer. Technical Parameter 1. Applicable standards: ASTM D3829, ASTM D4684 2. Refrigeration method: compressor refrigeration 3. Working temperature: