EC21 Product Catalogs - temperature control system

Fluke TI480 PRO Thermal Imaging Camera

20250226

control operation: Yes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval): YesBattery Batteries (field-replaceable, rechargeable): Two lithium ion smar

Fluke TIX580 Infrared Camera

20250109

control operationYes, through Fluke Connect SmartView desktop software or Fluke Connect mobile appAuto capture (temperature and interval)YesMATLAB® and LabVIEW® tool boxesIntegrate camera data, inf

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

control operationYes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval)YesBatteryBatteries (field-replaceable, rechargeable)Two lithium ion smart batte

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

system. Standard: Comply with IEC60092-50 WDLYCH electrical measuring meters are mainly used on various AC/DC transmission and distribution system, power control panel and electrical equipment for va

Heat Alarm & Detector Test Tunnel

20241122

temperature control system, computer etc. According to the requirements of standard specifications and parameters, we use fast response thermocouples and advanced PID controller to attain the heating

YH800 Intelligent Digital Pressure Calibrator

20241106

control bench, pressure source, can verify or calibrate pressure sensor, pressure transmitter, pressure switch, pressure gauge and other pressure instruments; ◆-10~50℃, automatic temperature comp

Emcee Model 1150 Staticon

20240808

Control SystemThe requested conductivity level and limits are set in the Control Module (Fig. 1). The test cell in the Fuel Cell Module generates conductivity and temperature data that is passed thro

Multi Channel Ultrasonic Flaw Detector

20240723

controllable over entire sweep range: A and B gates Rectification Positive halfwave, Negative halfwave, Fullwave, RF System Linearity Horizontal: +/-0.1% FSW, Vertical: 2% FSH, Amplifier Accuracy +/-

NDJ-8T Lab Digital Rotating Viscosity Meter Viscosimeter

20240705

temperature probe, special thermostat bath for viscometer, constant temperature cup, printer, standard viscosity sample (standard silicone oil), etc. 7. Chinese and English operating systems.

Maintenance Free Real-time Rebar Special Measuring Instrument GDC-L350-JX

20240703

control cabinet, measuring vehicle, electrical control box, LED display, cooling and dust removal system and supporting facilities. Adaptable rolling speed: ≤120m/s Adaptable rolling temperature:

Lab Stretching Machine| Laboratory Stretching Machine| Film Stretching Machine

20240627

Film Stretching Machine consists of clamping component, stretching component, stretching mechanism moving component, hot oven component, pneumatic curtain component and electrical control system. Mod

Touch Screen Temperature Humidity Chamber

20240624

Temperature Control mode BTC: Balance thermal Control Working environment temperature +5…+35 ℃ Performance Temperature range* -70℃~+150℃ (high temperature: 180℃, optional); (low temperatur

Sand and Dust Test Chamber

20240619

Control system Controller Programmable controller, color LCD touch screen Operation mode Simple operation, convenient setting, blowing dust time can be set, cycle period can be adjusted, time can b

ST-7601S UL Cable Vertical-Tray Flaming Test Room

20240614

control system, collection hood & exhaust duct flux control system, pressure measurement instrumentation of gas, smoke measurement instruments & temperature measurement system, flame height measureme

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

20240603

Control system: adopt Programmable Time Controller. 6. Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 7. Safety device: leakage protectio

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

system is adopted, which has a similar thermal expansion coefficient to most workpieces, providing an accurate and reliable length measurement benchmark, and can achieve more precise temperature corr

Digital Infrared Radiometer

20240527

Temperature -40℃ ~ +50 ℃ Dimension 279（L）* 202（H）*274（D）---RLK601、RLK602、RLK602D 368（L）* 202（H）*274（D）---RLK603 Weight 8.0Kg(RLK601、RLK602、RLK602D)/10Kg(RLK60

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

Temperature affect test: 2 hours, -40°c ~+70°c  Moisture and heat performance test,24hours. high temp. 55°c, low-temp 25°c, humidity 93%  Short circuit current impact test, 16KA, 2 second

ICONE2

20200511

Temperature control is achieved using 3 type K thermocouples and a 3-term (PID) temperature controller. Split Shutter Mechanism - protects the sample area before the beginning of the test. In this wa

Sweating Guarded Hotplate

20160615

systems. Product Information In the standard testing environment, heat the fixed aluminum or copper to a specified temperature, then test the heating power under the stable temperature. Similarly, pl

Automatic Cable Metal Wire Spring Material Universal Torsional Force Tester 5000N.M

20190815

Temperature Torsion Test Method " ASTM A938-2004 Performance Features 1. Servo motor drive, ensure the reverse speed constancy. 2. Cyclonical reducer drive, ensure driving high efficiency and stabili

200/500/1000/3000/5000N.M Automatic Metal Wire Spring Material Metal Universal Torsion Tester

20190821

Temperature Torsion Test Method " ASTM A938-2004 Performance Features 1. Servo motor drive, ensure the reverse speed constancy. 2. Cyclonical reducer drive, ensure driving high efficiency and stabili

Sobek Metallographic Tool-Makers Microscope

20180228

system CSIC infinity correction optical system Power 220V±10% ，50Hz , 0.5KW envirment requiry temperature range：22±2℃，humidity range：30%-70% optional parts 100X lens, Dark-fie

Reference Fuel Blender for Waukesha CFR Engine Motor

20240319

protection & temperature monitoring system to meet labs safety requirements. Fuel temperature and level in the tanks are monitored in real time, with low fuel level & overfilling warnings.

Heating Oil Bath Series

20170216

temperature. We also switched the control system of the product,whether digital or table display, all eqipped the temperature control device. Oil bath shell with bladder has isolation temperature c

ElectroMechanical Universal Testing Machine

20230330

Verification as ASTM E1012 Tensile test at room temperature DIN EN 10002-1, ISO 6892, ASTM A370, ASTM E 8 Tensile test on reinforced steel: ISO 10606, EN 10080 Compression test DIN 50106, ASTM E9

High Precision CCD Spectroradiometer

20230907

Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3%• Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3)• Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5%

Refrigerated Circulator WATER BATH

20160721

steel (Out) : Steel plate with powder coating Pump Capacity : 7 Liter/Min Refrigerator : Air cooling unit system Safety Device : Over Temperature Low level switch Power : 220V/ 50, 60HZ

BigTao Series Ethernet Tester

20190419

System Fans and 1 Power Fan 4 System Fans 2 System Fans and 1 Power Fan Status Indicators Power, Hard disk Power, Fan, Temp, Link LCD Screen Power, Hard disk Temperature 5℃-40℃ Humidity 20-85%, R

Computer Controlled Electronic Universal Testing Machine

20120515

Temperature 3) GB/T16491-1996 Electronic Universal Material Testing Machine 4) JJF1103-2003 Evaluation of Computer Data Acquisition System for Universal Testing Machine 5) GB/T16825-1997 Verification

ST Portable BDV Oil Test Kit,Oil Dielectric Strength Tester

20210224

control. 6.With overvoltage, overcurrent, limiting protection, in order to ensure the safety operation. 7.With a temperature measurement display function and system clock display. 8.Standard RS232 in

UL 1685 Cable Vertical-Tray Flame Test Room

20201002

control system; 2. Collection hood and exhaust duct. 3. Flow - measuring control system; 4. Smoke-measuring instruments. 5. Temperature-measuring control system; 6. Flame-measuring control system 7.

HSL-6001 Heat Seal Tester

20210625

system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Press

NiRun Automatic Viscometer

20200310

temperature controller: high accuracy and Auto optimization 2. Rate of temperature control: 0.1-8℃/min 3. Small sample size: only 30ml 4. Auto lift system: high accuracy and repeatability 5. The sp

Horizontal Type Valve Pressure Test Bench

20220509

temperature is Max 60 degrees centigrade , Min 5 degrees centigrade Oil circuit system Pressure 28Mpa max Test Medium Water(Allows to add rust inhibitor) kerosene or other liquid it’s viscosity not

Ozone Test Chamber,Ozone Colorfastness Tester AATCC 109 ISO 105 G03 ASTM D1149

20200216

temperature with relative humidity not exceeding 67 percent. 2. The instrument offers a high output ozone generator, touch screen controller, closed-loop ozone concentration control and a rotating s

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

temperature compensation from 0° to 50°C for full accuracy performance.Includes NIST-traceable calibration certificate.Modules can be calibrated locally, helping to control costs.A family of 29 opt

Pressure Composition Isotherm Equipment H-Sorb 2600PCT

20240118

temperature (atmospheric to 500℃) with a stainless steel VCR manifolds system, fully automated operation can control system and multi calculation methods, all these guarantee H-Sorb 2600PCT to prod

Hybrid Karl Fischer Moisture Titrator MKH-700

20140212

control unit 8-inch LCD (163.2 x 122.4mm) 256 colors 800 x 600 dots Language English / Japanese Ambient conditions Temperature 5 - 35°C Humidity 85%RH or below (no condensation) Power supply Meas

DX Hall Effect Measurement System for Laboratory Studying Electrical Properties of Semiconductor

20230522

system consists of an electromagnet, electromagnet power supply, high precision constant current source, high precision voltmeter, Hall effect sample holder, high and low-temperature controller, stan

Hot Air Laboratory Large High Temperature Oven

20220329

temperature range:R.T+10℃~300℃ Temperature fluctuation:≤±0.5℃ (no-load) Temperature deviation:≤±1℃ (no-load) time to Max.temperature:Approx.60min (R.T+10℃~300℃) Control System:PID D

Automatic Image Measuring Device

20231012

Temperature 20 ℃± 5 ℃, temperature change ＜ 2 ℃ / HR, humidity 30-80%, vibration ＜ 0.002g, lower than 15Hz Category Core components Brand Quantity Main part Base and column Shandong Taiqin

Vertical Excitation Changeover Temperature Humidity Testing Chamber

20230727

control of electronic goods, electric appliance, measurement device, food, automobile, metal, chemical, plywood, aviation, medical and etc.Application: Vertical excitation changeover temperature humi

Temperature Humidity Standard Environment Experiment Calibration Chamber Cabinet

20221209

temperature and humidity verification box by accurate measurement of temperature and humidity sensor and industrial programmable controller control. High control and testing accuracy, can provide con

ZHLB Bell Porver

20240308

control system. Product Features 1. Temperature and pressure measurement accuracy is high, the bus real-time high-speed transmission of measured values.2. High precision position sensing detection of

Precision High Temperature Test Oven

20240117

is adopted to ensure that the heat insulation performance meets international standards. The precise temperature control system reduces energy consumption, saving up to 20% to 50% of energy

Walk in Xenon Iamp Aging Test Chamber

20231107

temperature ventilation and cooling system of the test chamber is automatically controlled by the temperature controller, and the cooling system is used in the test chamber for cooling. Control black

LITE800 Industrial SLA 3D Printer

20230615

Systems Control Closed-loop Temperature Range 72–79 °F (22–26 °C) Maximum Change Rate 1 °C/hour Relative Humidity < 40% Machine Size (W x D x H) 1555 × 1445 × 2215 mm Machine Weight 1050 kg

Liquid Chromatograph

20240308

system controller has user-friendly design features such as a clock, thermometer, and hygrometer. Excellent performance - meeting the strict requirements of customers for instruments The detector ado

Dustproof Testing Machine | Dust Proof Chamber

20231024

Temperature range: RT+10~50℃• Standard wire diameter of metal screen: 50um; Standard spacing between wires: 75um• Test dust: dry talc powder; Talc powder dosage: 2~4kg/m; Dust drop method: free