EC21 Product Catalogs - temperature controllers

Programmable Control Temperature Humidity Tester

20160523

Programmable Control Temperature Humidity Tester Product Description Introduce: Programmable Temperature Humidity Environmental Test Chamber is designed for testing the capability of heat-endurance,

Fluke TI480 PRO Thermal Imaging Camera

20250226

control operation: Yes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval): YesBattery Batteries (field-replaceable, rechargeable): Two lithium ion smar

Fluke TI480 PRO 60 Hz, 640 X 480 High-Performance IR Thermal Camera

20250129

Temperature measurement range (not calibrated below -10 �C): ?-10 �C to +1000 �C (14 �F to 1832 �F) Accuracy: � 2 �C or 2% (at 25 �C nominal, whichever is greater) Reduce need take no

Fluke TIX580 Infrared Camera

20250109

control operationYes, through Fluke Connect SmartView desktop software or Fluke Connect mobile appAuto capture (temperature and interval)YesMATLAB® and LabVIEW® tool boxesIntegrate camera data, inf

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

control operationYes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval)YesBatteryBatteries (field-replaceable, rechargeable)Two lithium ion smart batte

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

Temperature -13-33℃, 100% comply with accuracy class Technical Standards GB/T7676-1998 Environment GB8355-1987 Safety Standards GB4793-20 Working Temperature -40℃-65℃ Options: 1. Transmitting

Bebur BT6308 Ozone Analyzer for Drink Water Wastewater Industrial Process Water

20241224

temperature of the sample water, and the output signal of the sensor is compensated by an electronic device, so that the measured value can be corrected with the change of temperature (temperature co

Heat Alarm & Detector Test Tunnel

20241122

temperature control system, computer etc. According to the requirements of standard specifications and parameters, we use fast response thermocouples and advanced PID controller to attain the heating

YH701 Temperature and Humidity Calibration Device

20241106

control, easy to operate, beautiful interface, precise control. ◆The interior of the working space is designed with stainless steel and no dead corners. The temperature and humidity field is unifor

Dissolved Ozone Meter Intelligent Online Water Ozone Analyzer Tester Sanitizer Ozone

20240929

temperature:0~60℃◇Resolution0.01mg/L, 0.1℃◇Accuracy ±1% or ±0.01 mg/L, ±0.5℃ ◇Temperature compensation function0~60℃(manual/automatic).◇Control interfaceTwo groups of ON/OFF relay

EMCEE Model 1153 Digital Conductivity Meter

20240813

temperature, it is very important to record the fuel temperature at which the measurement was performed.Process ControlsIn addition to safety reasons, electrical conductivity of fluids can be monitor

Isotech 4852 ADVANCED

20240803

Temperature Measurement Tools: Infrared thermometers, thermocouples, and controllers Torque Tools: Wrenches, screwdrivers, and testers Commitment to Quality We prioritize precision and reliability, s

Ultrasonic Flaw Detector

20240723

Temperature (℃) -20 - +50 H×W×D (mm) 240×156×48 Weight (kg) 1.0（with battery） For many years, AJR was the leading manufacturer of ultrasonic flaw detectors . We have a standard production w

Additel ADT761

20240722

controlled automatically from 90% vacuum to 375 psi (25 bar)Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar)0.02%FSFully temperature compensated0.005%FSFully A

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

Temperature control range Room temperature +10 ° C ~ 250 ° C Temperature control accuracy 0.1℃ Temperature measurement interface Have Data output interface Have Data processing software Optional

Hot Rolled Bar Outer Diameter Measuring Instrument GDC-J2400-JX

20240703

control cabinet, measuring vehicle, electrical control box, LED display, cooling and dust removal system and supporting facilities. Adaptable rolling speed: ≤120m/s Adaptable rolling temperature:

Lab Stretching Machine| Laboratory Stretching Machine| Film Stretching Machine

20240627

temperature Room temperature-350°C Operating temperature accuracy ±3℃ Stretching motor power 3.5kW Working voltage 3φ380VAC±10%，1φ220VAC±10%，50Hz Rated power Approx.22kW L x W x H 2040mm

High Low Temperature and Humidity Test Chamber

20240624

Temperature Control mode BTHC: Balanced temperature & humidity control Working environment temperature +5…+35 ℃ Performance Temperature range* -70℃~+150℃ (high temperature: 180℃, optional)

Shortwave Infrared SWIR TEC Cooled Thermal Camera with InGaAs Detector for Target Measurement

20240620

temperature control, with the temperature difference up to 40℃. ² Non-uniformity correction, filtering and enhancement algorithms. ² Miniaturization, low power consumption, high frame frequency.

Sand and Dust Test Chamber

20240619

blowing dust time can be set, cycle period can be adjusted, time can be adjusted. Safety device Over-temperature protection, grounding protection, etc. Power supply AC 220V/380V±10%, 50 Hz±0.5Hz

ST-9605 Oxygen (Air) Bomb Ageing Oven

20240615

temperature). Technical parameters： Maximum pressure: 2.5MPa Safety blow-up pressure: 2.7~3 MPa Pressure gauge: 0~4MPa,minimum scale 0.02Mpa Temperature controlling range: RT-150°C Effective volum

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

20240603

Temperature range RT+10~+40℃ Humidity 45%-75% Wire diameter of metal net 50μm Wire interval 75μm Airflow velocity ≤ 2.5m/s Time range 0~999H(adjustable) Vibration Time 0-999H(adjustable) Time

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

temperature characteristics, thus having good temperature stability, resistance to effective deformation, good rigidity, and small dynamic geometric error deformation; Adopting a double-sided elevate

GS-SW6401725-80-U Scientific Deep-cooled SWIR Camera

20240530

Control Interface USB2.0 External trigger port MCX L ens mount C/CS Power input 220V AC Power consumption ＜3 W TEC off Peak power consumption ＜600W@-80℃ Operation temperature 0℃ ~ ﹢

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

Temperature affect test: 2 hours, -40°c ~+70°c  Moisture and heat performance test,24hours. high temp. 55°c, low-temp 25°c, humidity 93%  Short circuit current impact test, 16KA, 2 second

HTT-02 Hot Tack Tester

20240517

Temperature Control: The HTT-02 maintains precise temperature control during testing to simulate the conditions encountered during the sealing process accurately. 3.Pressure Application: It applies c

WIKA Instrument PASCAL100IS-4IPS-1IN-1OUT-HART-EPS-PR

20240515

temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communication with a PC is used to remotely control the unit and to download the calibra

Master Meter Gas Flow Calibration System

20240417

temperature conversion, the indicated error of the flowmeter under test is determined. Drawing on international advanced experiences, a pulsation eliminator has been incorporated into the pipeline du

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

temperature compensation from 0° to 50°C for full accuracy performance.Includes NIST-traceable calibration certificate.Modules can be calibrated locally, helping to control costs.A family of 29 opt

KRD40 Zero-distance Drop Test System

20240402

Temperature range 0～40℃, Humidity≤80% (non-condensing) Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around

Hot Tack Tester ASTM F2029 Hot Seal Strength Testing Instrument Plastic Packaging Hot Tack Strength

20240325

controlled by P.I.D. temperature. Temperature rises fast to set temp and keeps stable 7 inch TFT touching screen for easy operation PLC control Aluminum encapsulated sealing jaws for average heating

Automatic Image Measuring Device

20231012

Temperature 20 ℃± 5 ℃, temperature change ＜ 2 ℃ / HR, humidity 30-80%, vibration ＜ 0.002g, lower than 15Hz Category Core components Brand Quantity Main part Base and column Shandong Taiqin

Programmable Hast Accelerated Aging Tester for Industry

20230727

temperatures and humidity. A HAST test chamber is a device that provides controlled conditions of high temperature and humidity to simulate the effects of aging and degradation on materials over a sh

Temperature Humidity Standard Environment Experiment Calibration Chamber Cabinet

20221209

temperature and humidity verification box by accurate measurement of temperature and humidity sensor and industrial programmable controller control. High control and testing accuracy, can provide con

Enviclone IEC 62782 Photovoltaic Modules Solar Panel Cyclic Dynamic Mechanical Load Test Machine

20240111

temperature, and internal conductivity of each cylinder can be monitored in real time. Features Load applcation method: the cylinder drives the suction cup to press and suck; Mechanical load material

100kW/200kW/500kW/800kW/1000kW/1200kW/2000kW AC Dummy Resistive Load Bank for Generator Load Test

20230615

temperature,fan fault protection,emergency stop Work voltage : AC380V/50Hz,3 phase 4 wire Cooling mode : forced air cooling, horizontal air inlet/out let Insulation class : FProtection grade : IP23(w

Intelligent Temperature Measuring Machine

20230417

Product Description Features of Intelligent Temperature Measuring MachineThe host runs the Android 7.1 operating system, adopts the latest face detection and recognition models, quickly captures face

ZHLB Bell Porver

20240308

control system. Product Features 1. Temperature and pressure measurement accuracy is high, the bus real-time high-speed transmission of measured values.2. High precision position sensing detection of

China Enviclone Programmable Walk in Large Size Salt Fog Spray Corrosion Test Chamber

20240113

Temperature ranges from -40 °C and to +80 °C.Structure and materials are PP and stainless anti-rust steel plates, with a long lifetime.Programmable controlling system, easy to operate.With efficien

Programmable Rapid-rate Thermal Cycle Chamber

20240117

Our Rapid-rate Thermal Cycle Chamber has a fast temperature change rate, with a mechanical refrigeration rate of up to 20 °C/min. It also has high control accuracy, with a fluctuation degree of

High Temperature Oven

20231120

temperatures below 40 degrees Celsius.If you need more models about our test equipment, please reference our chamber-testing（.）com Feature Digital display controller or touch screen controller.

Touch Screen Hot Runner Controller

20231204

M20 series touch screen hot runner temperature controllers are newly developed with latest achievement of intelligence and process control which have been well received in the hot runner temperature

Kiln Flue Gas Temperature Infrared On-line Monitoring System

20230513

online monitoring of kiln internal temperature, which provides a basis for operators to grasp the changes of kiln internal temperature in real time and improve the level of process control.

LITE800 Industrial SLA 3D Printer

20230615

Control Closed-loop Temperature Range 72–79 °F (22–26 °C) Maximum Change Rate 1 °C/hour Relative Humidity < 40% Machine Size (W x D x H) 1555 × 1445 × 2215 mm Machine Weight 1050 kg Initial

Oxygen Permeability Testing Instrument (OTR Tester)

20220901

Temperature range 15℃~45℃ (5℃~50℃ optional) Temperature accuracy ±0.1℃ Humidity range 0%RH, 30~90%RH, 100%RH Humidity accuracy ±2%RH Gas supply pressure 0.1~0.2MPa Environment temperature

DroppingPointof LubricatingGrease Tester

20231020

Temperature control accuracy: ±0.1℃ 4. Heating method: electric heating tube heating 5. Working unit: 2 tubes 6. Machine power: 800W 7. Working power supply: 220V 50Hz 8. Instrument size: 210*220*

New Olympus Nortec 600D Eddy Current Flaw Detector

20230604

temperature range.Continuous null filter.Strip chart view with sweep alarm.6 kHz measurement rate.Remote Control from NORTEC PC.Alarm outputs.Analog outputs.Digital inputs.SPECS : HousingOverall dime

Needle Flame Test

20240102

temperature: 0~1000℃• The temperature rises from 100℃±2℃ to 700℃±3℃ within 23.5 seconds±1s• Thermocouple: Φ0.5mm K type• Applied with touch screen and remote control• Number of

12PSB Diesel Fuel Injection Pump Test Bench

20230605

classes Rotation speeds presetting; 6. Constant temperature controlled; 7. Ultra low noise; 8. Operating position: arbitrary side of the two work sides of the test stand; 9. Built-in air resource;

Gas Chromatography

20240301

control of data. GC-460PLUS gas chromatograph column temperature chamber parameters: Temperature range: 5 ℃~450 ℃ above room temperature Temperature control accuracy: ± 0.01 ℃ Program heating: