EC21 Product Catalogs - temperature controls

Programmable Control Temperature Humidity Tester

20160523

Programmable Control Temperature Humidity Tester Product Description Introduce: Programmable Temperature Humidity Environmental Test Chamber is designed for testing the capability of heat-endurance,

Fluke TI480 PRO Thermal Imaging Camera

20250226

control operation: Yes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval): YesBattery Batteries (field-replaceable, rechargeable): Two lithium ion smar

Fluke TI480 PRO 60 Hz, 640 X 480 High-Performance IR Thermal Camera

20250129

Temperature measurement range (not calibrated below -10 �C): ?-10 �C to +1000 �C (14 �F to 1832 �F) Accuracy: � 2 �C or 2% (at 25 �C nominal, whichever is greater) Reduce need take no

Fluke TIX580 Infrared Camera

20250109

control operationYes, through Fluke Connect SmartView desktop software or Fluke Connect mobile appAuto capture (temperature and interval)YesMATLAB® and LabVIEW® tool boxesIntegrate camera data, inf

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

control operationYes, through SmartView® software or Fluke Connect® mobile appAuto capture (temperature and interval)YesBatteryBatteries (field-replaceable, rechargeable)Two lithium ion smart batte

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

Temperature -13-33℃, 100% comply with accuracy class Technical Standards GB/T7676-1998 Environment GB8355-1987 Safety Standards GB4793-20 Working Temperature -40℃-65℃ Options: 1. Transmitting

Bebur BT6308 Ozone Analyzer for Drink Water Wastewater Industrial Process Water

20241224

temperature of the sample water, and the output signal of the sensor is compensated by an electronic device, so that the measured value can be corrected with the change of temperature (temperature co

Heat Alarm & Detector Test Tunnel

20241122

temperature control system, computer etc. According to the requirements of standard specifications and parameters, we use fast response thermocouples and advanced PID controller to attain the heating

YH800 Intelligent Digital Pressure Calibrator

20241106

control bench, pressure source, can verify or calibrate pressure sensor, pressure transmitter, pressure switch, pressure gauge and other pressure instruments; ◆-10~50℃, automatic temperature comp

Dissolved Ozone Meter Intelligent Online Water Ozone Analyzer Tester Sanitizer Ozone

20240929

temperature:0~60℃◇Resolution0.01mg/L, 0.1℃◇Accuracy ±1% or ±0.01 mg/L, ±0.5℃ ◇Temperature compensation function0~60℃(manual/automatic).◇Control interfaceTwo groups of ON/OFF relay

Emcee Model 1152 Digital Conductivity Meter

20240813

temperature it is important to record the fuel temperature at which the measurement was performed.Process ControlsIn addition to safety reasons, electrical conductivity of fluids can be monitored for

Isotech 4852 ADVANCED

20240803

Temperature Measurement Tools: Infrared thermometers, thermocouples, and controllers Torque Tools: Wrenches, screwdrivers, and testers Commitment to Quality We prioritize precision and reliability, s

Surface Roughness Gauge

20240723

error ±(7-10)% Variability <6% Data Storage 100 groups Power Rechargeable li-battery Working temperature -20℃～40℃ Relative humidity <90% Size 158mmx63.5mmx46mm Weight of Host 0.3kg

Additel ADT761

20240722

controlled automatically from 90% vacuum to 375 psi (25 bar)Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar)0.02%FSFully temperature compensated0.005%FSFully A

Digital Lab Liquid Brookfield Rotational Viscometer

20240705

Temperature measurement Yes Automatic scanning function Automatically scan and recommend a priority combination of rotor and speed Display measurement range Automatically display the selected combina

Hot Rolled Bar Outer Diameter Measuring Instrument GDC-J2400-JX

20240703

control cabinet, measuring vehicle, electrical control box, LED display, cooling and dust removal system and supporting facilities. Adaptable rolling speed: ≤120m/s Adaptable rolling temperature:

Lab Stretching Machine| Laboratory Stretching Machine| Film Stretching Machine

20240627

temperature Room temperature-350°C Operating temperature accuracy ±3℃ Stretching motor power 3.5kW Working voltage 3φ380VAC±10%，1φ220VAC±10%，50Hz Rated power Approx.22kW L x W x H 2040mm

Walk in Temperature Humidity Test Chamber

20240624

Temperature Control mode Balanced temperature & humidity control (BTHC) Performance Temperature range -70/-40~+100℃ (high temperature:120℃,150℃ optional) Humidity range 20%~98%R.H. Temperature

Shortwave Infrared SWIR TEC Cooled Thermal Camera with InGaAs Detector for Target Measurement

20240620

temperature control, with the temperature difference up to 40℃. ² Non-uniformity correction, filtering and enhancement algorithms. ² Miniaturization, low power consumption, high frame frequency.

Sand and Dust Test Chamber

20240619

blowing dust time can be set, cycle period can be adjusted, time can be adjusted. Safety device Over-temperature protection, grounding protection, etc. Power supply AC 220V/380V±10%, 50 Hz±0.5Hz

ST-9605 Oxygen (Air) Bomb Ageing Oven

20240615

temperature). Technical parameters： Maximum pressure: 2.5MPa Safety blow-up pressure: 2.7~3 MPa Pressure gauge: 0~4MPa,minimum scale 0.02Mpa Temperature controlling range: RT-150°C Effective volum

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

20240603

±30％ @ 4kV 6.0A ±30％ @ 6kV 8.0A ±30％ @ 8kV Environment: Temperature:15°C－35 °C ;Humidity:10%－75% Power supply: AC220±10％，50/60Hz, 300W Dimension: 260mm(W)×170mm (H)×360mm(D)

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

temperature characteristics, thus having good temperature stability, resistance to effective deformation, good rigidity, and small dynamic geometric error deformation; Adopting a double-sided elevate

320x256 30um SWIR InGaAs Image Sensor

20240530

control the chip temperature ITR, IWR standard integration mode, IMRO, NDRO, SITR special readout mode Integrating capacitor 10fF, 210fF optional Integration time is adjustable, the minimum integrati

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

Temperature affect test: 2 hours, -40°c ~+70°c  Moisture and heat performance test,24hours. high temp. 55°c, low-temp 25°c, humidity 93%  Short circuit current impact test, 16KA, 2 second

HTT-02 Hot Tack Tester

20240517

Temperature Control: The HTT-02 maintains precise temperature control during testing to simulate the conditions encountered during the sealing process accurately. 3.Pressure Application: It applies c

Additel ADT761

20240515

controlled automatically from 90% vacuum to 375 psi (25 bar)Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar)0.02%FSFully temperature compensated0.005%FSFully A

Sonic Nozzle Gas Meter Test Bench

20240417

controller and high-precision A/D conversion technology, it automatically detects parameters such as temperature, pressure, humidity, and participates in real-time error correction calculations to en

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

temperature compensation from 0° to 50°C for full accuracy performance.Includes NIST-traceable calibration certificate.Modules can be calibrated locally, helping to control costs.A family of 29 opt

KRD31 Constant Acceleration Tester (Arm Type)

20240402

Control Mode Fully closed-loop digital network (remote) automatic control + manual control Working Environment Temperature range 0～40℃, Humidity≤80% (non-condensing) Installation Condition Acco

Heat Seal Tester ASTM F2029 Plastic Film Heat Seal Data Testing Instrument for Sale

20240325

controlling critical parameters such as time, temperature, and pressure. The efficacy of seals in flexible packaging serves as a significant indicator of both functional performance and consumer conv

ICONE2

20200511

Temperature control is achieved using 3 type K thermocouples and a 3-term (PID) temperature controller. Split Shutter Mechanism - protects the sample area before the beginning of the test. In this wa

300kN UTM / TTM / Tensile Test Equipment / Tensile Testing Machine Price (WEW-300B)

20190815

control, the completion of pulling, pressure, bending, shear test, satisfy with the national standard requirements of GB/T228-2002 "metallic materials at room temperature tensile test method " 2. The

200/500/1000/3000/5000N.M Automatic Metal Wire Spring Material Metal Universal Torsion Tester

20190821

Temperature Torsion Test Method " ASTM A938-2004 Performance Features 1. Servo motor drive, ensure the reverse speed constancy. 2. Cyclonical reducer drive, ensure driving high efficiency and stabili

Sobek Metallographic Tool-Makers Microscope

20180228

，50Hz , 0.5KW envirment requiry temperature range：22±2℃，humidity range：30%-70% optional parts 100X lens, Dark-field, polarized, DIC(differential interference contrast)

Reference Fuel Blender for Waukesha CFR Engine Motor

20240319

controls the whole blending process to eliminate human error and improve the efficiency of octane/cetane testing. ◼ Safety and Real-Time Monitoring The unit is equipped with electrical protection &

Heating Oil Bath Series

20170216

temperature. We also switched the control system of the product,whether digital or table display, all eqipped the temperature control device. Oil bath shell with bladder has isolation temperature c

ElectroMechanical Universal Testing Machine

20230330

Verification as ASTM E1012 Tensile test at room temperature DIN EN 10002-1, ISO 6892, ASTM A370, ASTM E 8 Tensile test on reinforced steel: ISO 10606, EN 10080 Compression test DIN 50106, ASTM E9

High Precision CCD Spectroradiometer

20230907

Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3%• Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3)• Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5%

Refrigerated Circulator WATER BATH

20160721

steel (Out) : Steel plate with powder coating Pump Capacity : 7 Liter/Min Refrigerator : Air cooling unit system Safety Device : Over Temperature Low level switch Power : 220V/ 50, 60HZ

LVLP Linear DC Power Supply

20151002

temperature changes) Load regulation(load 0~100%): ≤0.3% of the rated value (output voltage change ratio due to output current change from 0 to rated value) 3. Accuracy (C.C.) Line regulation(361

BigTao Series Ethernet Tester

20190419

Temperature 5℃-40℃ Humidity 20-85%, RH Load Module Available P/V6000 Series, P/V8000 Series, P/V9000 Series, P/V9600 Series Size 310mm×280mm ×89mm 371mm×424mm ×107mm 440mm×436mm ×133mm Weig

NAVLF Ultra-low Frequency High Voltage Generator

20180827

Temperature: -10 ℃ ∽ +40 ℃; Humidity: ≤ 85% RH 8,Power Supply: AC 50 Hz, 220V ± 5% Attention should take 1, NAVLF Ultra-low Frequency High Voltage Generator are equipped with a bo

Computer Controlled Electronic Universal Testing Machine

20120515

Temperature 3) GB/T16491-1996 Electronic Universal Material Testing Machine 4) JJF1103-2003 Evaluation of Computer Data Acquisition System for Universal Testing Machine 5) GB/T16825-1997 Verification

ST Portable BDV Oil Test Kit,Oil Dielectric Strength Tester

20210224

temperature and humidity. 5. The whole process easy to control. 6.With overvoltage, overcurrent, limiting protection, in order to ensure the safety operation. 7.With a temperature measurement display

Proton Exchange Membrane Gas Permeability Tester Plasric Packaging/Flexible Packages

20221214

control Ÿ One-button test, test automatically through whole process Ÿ High accuracy vacuum sensors embedded in Ÿ 3 Chambers with independent temperature sensor Ÿ Test under various RH conditions

Articulation Flexible Video Borescope

20160901

Temperature -25º to 60º C (-13º to 140º F) Waterproof IP67(Insertion tube and tip) Light Source Number of lamps 4 Weight 0.34 kg Brightness Control Manual Lamp Type LED Lamp Outpu

ST9602P Temperature & Humidity Testing Chamber

20201002

control of refrigerant flow calculations. Temperature, humidity are rising or falling slope rate controller(IEC60068-2-56, IEC60068-2-30) According to IEC60068, GB2423.1, GB2423.2, GB11158, GB10589 a

Hydraulic Dynamometer/Engine Test Equipment

20230528

consumption(kg/h) 63000 Max temperature (°C) 70 Spindle length 1440 Spindle height 840 Size of dynamometer(mm) 1452x1558x1310 Size of base (mm) 1256x1559x260 Net weight(kg) 3300 Interia(kg.m) 7.1

NiRun Automatic Viscometer

20200310

automatic viscometer automatic viscometer Features： 1. Built-in temperature controller: high accuracy and Auto optimization 2. Rate of temperature control: 0.1-8℃/min 3. Small sample size: only 3