EC21 Product Catalogs - two value

Fluke TI480 PRO Thermal Imaging Camera

20250226

value and table)On-screen reflected background temperature compensation: YesOn-screen transmission correction: Yes*Best possible Wireless connectivity To PC, iPhone® and iPad® (iOS 4s and later), A

Fluke TIX580 Infrared Camera

20250109

value and table)On-screen reflected background temperature compensationYesOn-screen transmission correctionYesLive line markerYes*Best possible Wireless connectivityTo PC, iPhone® and iPad® (iOS 4s

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

value and table)On-screen reflected background temperature compensationYesOn-screen transmission correctionYesLive line markerYesColor palettesStandard palettes9: Rainbow, Ironbow, Blue-Red, High Con

Laser Distance Measuring

20241206

two points, providing measurements in seconds Applications: 1.Measuring range:50/70/100 meters 2.Single measurement,continuous measurement (maximum/minimum value) 3.Front benchmark,back benchmark 4.

Ramp Pressure Tester

20241127

BPT-4000 Ramp Pressure Tester is an advanced testing instrument for pressure testing glass containers, also can be used to test the burst value.Two positions, high efficiency. PLC controlled, LCD tou

YH811 Multi Functional Thermal Calibrator

20241106

◆High accuracy measurement and output of mV, V, mA, Ω, eight types of thermocouples, and four types of thermal resistance; ◆The temperature value, corresponding millivolt value, and resistance v

Smoke Alarm Production Test Tunnel

20241019

value. The aerosol concentration is controlled to set value by PID algorithm and can maintain the smoke density with +/-0.004dB/m in reading when door keep closing. After exchange of samples tray, th

Hot Sale Turbidity Meter for Water Reliable Turbidity Sensors and Transmitters with RS485

20240929

value can be set freely , relay load :3A 220VAC/24VDC.◇Working voltage :220VAC10%,50/60Hz ◇Working condition :environment temprature0~60℃,relative humidity ≤90% ◇Output load :load<750Ω(

EMCEE Model 1154 Precision Conductivity Meter

20240813

values than the standards offered.Theory of OperationA specific volume (100-mL) of test sample is introduced between the two concentric electrodes in the Cell. Using a triaxial cable, the Cell is con

Ultrasonic Flaw Detector

20240723

value; ● Lock and unlock function of system parameters; ● Electronic clock calendar ; ● Two gates setting and alarm indication; ● Gate and DAC alarm; Specification Measuring Range (mm) 0 -

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

value display value accuracy is accurate to two decimal places, namely 0.01mPa.S (new function). 6. With timing measurement function, very useful for detecting non-Newtonian liquid (new function). 7.

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

value≧5A，CT can supply meet the indicator power requirement  Sampling accuracy: I<10A±1%，I>10A±2%  Sensor factory automatic calibration, to ensure consistency；  intelligent motor c

Radiation Detectors

20240517

values is very important. For example, terrestrial gamma radiation is typically measured at 0.03 - 0.3 µSv/h (microsieverts per hour). This "normal" range of oscillations is determined by naturally

SPC-01 Stretch Film Peeling Cling Tester

20240517

value recording. Supports elongation rates of 50%, 100%, and 200%. Includes an embedded micro printer. Addition of a coefficient of friction function is optional. To test peel cling, two sample types

Master Meter Gas Flow Calibration System

20240417

values output by the two meters is conducted, and after pressure and temperature conversion, the indicated error of the flowmeter under test is determined. Drawing on international advanced experienc

KRD10 Hydraulic Vertical Shock Test System

20240416

values, integrated IPS-2000 shock control & measuring system can accurately execute the shock test Multi-track Guide Posts: combined with good lubricity and noise free hydraulic balance lifting syste

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.Easy to useThree year warrantyBright white dual display. Read both sourced

Automatic Cable Metal Wire Spring Material Universal Torsional Force Tester 5000N.M

20190815

value of torsion angle ±1% Resolution of torsion meter torsion angle 0.01º Torsion speed 3.6-1080°/min Relative error of torsion speed Within ±1.0% of setting value Max. distance between two col

200/500/1000/3000/5000N.M Automatic Metal Wire Spring Material Metal Universal Torsion Tester

20190821

value of torsion angle ±1% Resolution of torsion meter torsion angle 0.01º Torsion speed 3.6-1080°/min Relative error of torsion speed Within ±1.0% of setting value Max. distance between two col

DL400 Pro Smart Screen Tester

20230908

value. As the pressure value increases, the screen changes from a small red square to a large green square. The selling point of the original color repair: DL400 Pro Smart Screen Tester supports the

China MIL-STD-810H Military Standard Dual Blowing Dust Sand Proof Resistance Test Chamber Machine

20240114

values. To control and display Temperature, Humidity, Wind Speed, Dust Concentration, Test Time, etc. It displays Set Value and Actual Values of Temperature, Relative Humidity, Wind Speed and Dust Co

Transformer Variable Ratio of Entire Inspection Test

20180827

values in K1, K2 and K3 according to the "group switch selection table" given on the panel Do not state. There are two resolution selection switches, that is, after the decimal point of two digits a

Ink Rub Tester

20180628

value is achieved. Dry and Wet rub can be performed on the Ink Rub Tester. The method of operation is that a 2 or 4 Lb weight with a clean white board is swept across the test piece for a set number

Current Injection Test

20180509

value, second current value, turn ratio and the action time. Packing is used as aluminum alloy body with PC panel. TEST-901 is mainly applied to CT turn ratio testing in the power system and contact

DC Motor Armature Testing Equipment

20200324

display value+2.5% measuring range+3words Waveforms limited value Minimum difference 0.1% (waveform difference) impulse internal setting Available Sample frequency 20/40MHz（self-adjustable)

Phantomlab ECTphan 330

20230822

values in the area. End Plate: The end plate has threaded holes to mount the point source holder and the ‘hot’ and ‘cold’ low contrast inserts. When tests are not needed the holes may be plug

Good Price Chair Armrest Fatigue Durability and Bending Durability Testing Machine for Office Chair

20210410

value 5. RPM speed is displayed and can be adjusted continuously 6. Power supply (power) : 220VAC 1.0a 7. Air source: air pressure: ≥ 0.5mpa; Flow rate: ≥800L/min; The air source is filtered and

Computer Control YFTD300 Safety Valve Test Bench for Safety Valve Pressure Calibration and Seal Test

20230330

value can be captured to print out the testing monitoring graph, which can be used as technical document archive. 5. "Safety door" device is advised to make sure safety during air seal test process.

Coefficient of Friction Tester

20231016

value indicates a greater force requirement. The coefficient of friction varies based on the specific materials involved. In the context of packaging film, the coefficient of friction refers to the

Automatic Image Measuring Device

20231012

value through focusing or get the current point coordinates through automatic focusing. You can also set whether auto focus is performed when running the user program The following figure shows the d

EHS Shore Durometer Hardness Tester Unit

20240313

values are obtained with a thinner specimen. （4）The lateral dimensions of the specimen shall be sufficient to permit measurements at least 12.0 mm from any edge. 2． Test Mode There are three ki

NDW-500 Computer Controlled Torsion Testing Machine

20120515

value 8 Torsion speed 3.6-360º/min. (stepless speed regulation) 9 Relative error of torsion speed Within ±0.5% of setting value 10 Max. distance between two collets 0-600mm 11 Min. diamet

New Olympus Nortec 600D Eddy Current Flaw Detector

20230604

values over 62%. Meets or exceeds BAC 5651 specifications. Non-conductive coating thicknessCan measure non-conductive coating thickness from 0 mm to 0.648 mm. Accuracy of 0.025 mm (±0.001 in.) over

ST-6606 Cable Flexing Tester

20201002

value of current test display by 41/2 LED digital Current Meter. 4. Voltage: Voltage value of current test display by LED digital Voltage Meter two-core single-phase AC: 0~250V(adjustable)50HZ three-

AS-2011 Micron Laser Particle Size Analyzer 0.1-500um

20100926

values according to user’s specific requirement. -AS-2011 completely meets the requirement of ISO 13320-1, an international norm on laser particle size analyzer and each unit goes through stric

1000kn Computer Servo Steel Hydraulic Universal Testing Machine

20211029

value: ≤±1% 11.Displacement resolution: 0.01mm 12.Clamping method: Hydraulic 13.Piston Max. Stroke:200mm 14.The piston max.movement speed:50mm/min 15.Distance between two columns: 500mm 16.Max. Te

DWC-80 Low Temperature Chamber

20230529

machine; 2) Controlled by intellligent instrument, digital presentation temperature value, automatic control temperature, automatic time and alarm. 3) High security, refrigerate fast, large volume.

TN11298 Button Pull Tester / SafQ Snap Tester

20180703

value Calibration Weight(15 lbs) Calibrating the accuracy of the force value Lower Fabric Clamp,Level Arm Locking Used to grip the different sizes of buttons Long Nose Vise Grip Used for holding sma

Gas Pycnometer Analyzer G-DenPyc 2900

20240118

value for some fixed-temperature-required samples Control System: programmable logic controller (PLC) system obtains high integration and strong anti-interference, software operated fully automated a

Box Compression Strength Tester

20120619

Value Test There are two parameters which are to be set in the constant value test: load force value and deformation value. The user can set one or both of them according to the practical requirement

Karl Fischer Coulometric Titrator MKC-710S

20170120

value and factor value Data storage 500 samples GLP conformance Registration of operator / User group administration Check performance with standard substance : Reminder of scheduled check date / R