EC21 Product Catalogs - flange series

Butterfly Valve Wafer Type

20250326

Size:DN40-DN1200; General Design:API609; Mounting Pad:ISO 5211; Face to Face:API609, EN558 1-20 series etc; Flange Drilling:DIN 2501 PN10/PN16; Inspection and Test:API598 Body:CI/DI/WCB/SS304/SS316 D

SS-2BV-8FFL Coplanar Two-valve Group

20250313

EF series two valve sets introduce foreign product technology forged valve body, working threads that do not come into contact with the system medium, and non-rotating type The valve stem design is e

F650 Series Cast Steel Check Valve

20250305

F650 Series Cast Steel Check Valve Size RangeDN15～DN600 Temperature Range-25～450℃ Body MaterialsCarbon steel Bonnet materialCarbon steel Disc materialCarbon steel Stem materialStainless steel -

Honeywell Solenoid Solenoid Valves (Ex) for Gas, Liquid Gas/Fuel Ex-version Flange Connection K15G35

20250109

series Flange connection T15G35F-Ex Honeywell Solenoid valves (Ex) for universal application TG-series Flange connection T20G35F-Ex Honeywell Solenoid valves (Ex) for universal application TG-series

Resilient Seat Gate Valve DIN3352-F4, DIN3352-F5, BS5163

20241230

Specification Table PN(Mpa) 1.0/1.6/2.5 DN(mm) 50-300 Face to face EN558-1 series 3/14/15 End standard EN1092-2 Top flange ISO5210 Pressure test Shell 1.5/2.4/3.75 Mpa Seal Water 1.1/1.76/2.75 Air 0

Fluoroplastic Lined Butterfly Valve

20241125

Flange,WaferActuator Type: Pneumatic Piston,ElectricISO 5211 ACTUATOR ASSEMBLY Product Overview The ZPR810F series of fluorine-lined butterfly valves are coated with a layer of fluoroplastic on the v

Stainless Steel Internal Screw Thread Filter Toilet Water Pipe Industrial Y Type Strainer

20240828

Design confirms: API602,BS5352,ANSI B16.34 Flanges drilled confirms: BS EN1092,BS10 Table D/E、JIS10K Tightness check: API 598/ISO 5208/EN12226-1 Face-to-face conform: DIN3202,F6/EN558-1 series 48 N

ASTM A105 Fully Welded Ball Valve

20240816

Flanged Dimension: ASME B16.5, EN 1092-1, BS 4504, DIN 2501Flanged to ASME B16.5 (2 Inch-24 Inch) and ASME B16.47 Series A / B (26 Inch and above) Clamp / Hub ends on request.Butt Welding Ends: ASME

Swing Check Valve

20240726

series and H76F46 double-flap swing series. Their structural forms are: the valve discs rotate around the (pin) shaft outside the valve seat, open and close, and prevent the medium from flowing back.

Pneumatic Reactor/Tanks Bottom Discharge Valve/Baiting Valve/Emptying Valve (ZPL100 Series)

20240607

Pneumatic Reactor/Tanks Bottom Discharge Valve/Baiting Valve/Emptying Valve (ZPL100 Series) Products Overview The bottom discharge valve is primarily use for discharging materials from the bottom of

Check Valve

20240511

Flanged End ASME B16.5，26"and larger sizes according to ASME B16.47 Series A or Series B． Butt-weld End：ASME B16.25． Shell WalI Thickness：BS 1868． Inspection and Test：APl 598,BS EN 1226

Food-Grade Industrial Grade Sanitary Stainless Steel Butterfly Valve

20230922

series: butterfly valveThe butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butte

Tilting Check Valve with Lever,Counter Weight and Hydraulic Damper

20231111

flange tilting check valve with hydraulic damper Size range: DN100-1200mm Face to face dimensions:EN558 series 14 Test Standard-BS EN12266-1 Body-Ductile iron Disc-Ductile iron Body ring-SS304 Retain

3 Way Hydraulic Ball Valve

20230808

Flange connections to ISO 6162-1 and 6162-2, ISO 6164 and CETOP RP 63 H. Manually operated valves for shutting off, regulating, throttling and fluid media in mobile and industrial hydraulics. Series

Ring Joint Gasket

20230904

flange. 3. RX Type ring joint gaskets are manufactured to fit the API 6B flange"s groove, interchangeable with R(oval) and R(octagonal) series, bear pressure can reach 15000 PSI, so these gaskets per

Cast Iron Flanged Butterfly Valve

20211021

series of cast iron flanged butterfly valves are widely used in water supply and drainage, building fire protection and other systems, especially in the fire pipeline, which can be used in noncorrosi

Wafer Type Butterfly Valve

20130419

Flange to PN6/10/16/25, ANSI CLASS125/150, JIS 5/10/16K. Pressure rating: PN6, PN10, PN16, PN25, 200PSI, 285PSI. Face to face: ISO5752, EN558 basic series 20(wafer short), API609 Material: Body: Duct

Wafer Check Valve

20140630

flanges: ANSI B16.5, B16.47 SERIES A & SERIES B,JIS,BS,DIN Specifications: 1) Size: 2” to 60” 2) Class: 150LB to 2500LB 3) Type: Double plate or single plate, wafer type, lugged type, fla

Relief Valve YYFJ-L20

20191210

Flange,valve assy,spray pump, manual brake valve, gear oil pump, discharge filter assembly, discharge filter screen,pulsation dampener etc. Rubber parts and other drilling rig equipment series: cruis

Pan Check Valve(Wafer Type)

20090102

Flange Material 1. Body Forged Brass(100A: Branze) Stainless Steel 2. Disc Stainless Steel Solid Teflon (-40~180°C, working P.7 Bar) 3. Spring seat Stainless steel 4. Spring Stainless steel 5. C

Wafer Dual Plate Check Valve

20091231

STANDARD: API594 FACE TO FACE: ISO5752; DIN3202; API594; EN558-1(SERIES16) BODY FLANGE DRILLING: DIN2501; ANSI125/150; AS2129 TABLE D/E; BS4504; JISB2210 10K TEST INSPECTION: API598; GB13927

24VDC 3way Pinch Valve 02T

20170112

Flange (Polyethylene)/ Mounting Ring (Aluminum)/ Mounting Clip (Spring Steel) Product Specifications 12 volt or 24 volt DC solenoid; 2way normally closed (NC solenoid pinch valve) 2way normally ope

Ultra Short Face-to-Face Dimension Electric Ball Valve

20180129

Product Description： Ultra short face-to-face dimension electric ball valve consists of the MBY series electric actuator and ultra short face-to-face dimension ball valve. The series of products

Triple Offset Butterfly Valve

20120515

Flange: ISO 5752 4) End flange dimension: ASME B16. 5 (for NPS<24"), ASME B16. 47 series B, API605, ASME B16. 47 series A, MSS SP-44 (for NPS>24"), or BSEN 1092 5) Top flange: ISO5211 6) Connecting:

Swing Check Valve

20230525

Flanged Check Valve DIN3202 F6 90° Swing check valve Standard Design standard DIN3202 F6 Flange drilling standard EN1092-2 PN10,PN16,PN25 Face to face standard EN558-1 Series 48 Hydraulic test stand

Pressure/Vacuum Relief Valve

20140708

PRESSURE/VACUUM RELIEF VALVE The finekay 8110 Series Full Lift Type Valve is for applications requiring low fugitive emissions and operation near tank MAWP. A Full Lift Type Valve is a relief valve w

General Purpose Ball Valves

20130930

ED series General Purpose ball valves 1PC, 2-PC, 3-PC BALL VALVE CLASS 150/300 PN 16/25/40 Pressure Rating 1000 psi (PN64) WOG, 150 psi (10 bar) with saturated steam With Flanged End: 40 Bar for size