EC21 Product Catalogs - position system

SDV70 Single Spool Hydraulic Sectional Control Valve

20260531

positions(sylinder spool only); manual,hydraulic, electric or pneumatic operation; sectional construction for maximum flexibility; low internal pressure drop; work section are 100% pre-assembled and

D71X-16Q Wafer Gear Type Butterfly Valve

20250318

position. 2. The structure is simple and compact, and it can be turned on and off quickly at 90°C. 3. Small operating torque, labor-saving, and lightweight. 4. The flow characteristics are straight,

BS5163 Gate Valve PN16

20250305

Position of Valve Rod Inside Gate Valve Standard DIN Production Capacity 5000pieces/Month Application Industrial Usage, Water Industrial Usage BS5163 is a British Standard specification for resilient

HIFLUX - Air Operated Valve(AOV) - Normal Close / Normal Open

20250121

position in normal times, so the valve is open. ② If air pressure is applied from the upper side at this time, the round plate is moved downward by incoming air pressure. ③ The stem connected to

Herion Direct Solenoid Actuated Poppet Valves Series 24011 Item 2401103080002400

20250109

position (mechanical return spring) Valves for safety systems to SIL 4 or AK 7 Flow: 340.00 l/min Operation: 3/2 Port size: G1/4 Brand: Herion Voltage: 24Vdc Herion Direct solenoid actuated poppet va

KHB3K Three-way High Pressure Ball Valve KHB3K-G NPT

20240815

position 3-way ball valve, this valve is suitable for hydraulic system, chemical industry, oil refining equipment in the three-way pipe flow switching. Note: Please indicate the product model when or

Double Expanding Gate Valve, API 6D, API 6A

20240801

position, comparable to a pipe segment of the same dimensions. The seat faces, situated outside the flow stream, are safeguarded against erosive wear, enabling the passage of pigs and scrapers throug

Grove G4N Flat Gate Valve

20240717

position indicatorThrough-conduit, self-cleaning, floating slab gateFloating seat always in contact with the gateMetal-to-metal primary seal; protected O-ring secondary sealBlock-and-bleed and double

Pneumatic/Electric/Manual Controlled Metallic O/V-Shaped Cut-Off Ball Valve(ZPR700)

20240608

systems. 4. Operating the valve is effortless as it only requires a 90° rotation from full open to full close position, allowing for easy remote control. 5. Maintenance is hassle-free with the easil

API Industrial Floating Stainless Steel Ball Valve

20240521

position of the ball and the sealing ring. Full bore diameter: The flow aperture of the trunnion style ball valve is the same as the inner diameter of the pipeline, so that the pipeline can be cleane

Superimposed Check Valve

20240428

system. The speed of hydraulic cylinders can also be controlled. This solenoid valve for hydraulic oil is also available with throttle in only one direction, with free flow in opposite direction. Oi

Globe Valve

20240425

system from backflow; valves with check valve plugs operate in an intermediate position between wanquan open and closed, allowing throttling. They are used in industrial equipment with a rated pressu

Double Rotary Valve

20230904

positioner to control the disc freely, to feed the Materials with a constant velocity Surface roughness: Ra<0.4(Product contact) Ra<0.8 (Non-product contact) --Sizes: 2"-12" --Standard: 3A / ASME-BP

Industrial Hydraulic Solenoid Valve Two Position Six Way 12V 24V DC

20240109

PRODUCT DESCRIPTIONProduct Pictures: KL7102107ER27ER two position six way solenoid valve with 12V 24V DC coil and steel valve body Description :Techanical reference:Rated pressure: 25MPaMaximum peak

YT-1000 ROTORK Ytc Smart Positioner Electric Actuator with Control Valve

20231229

Positioner is used with the pneumatic control valve to form a closed loop control loop. The DC current signal given by the control system is converted into a gas signal that drives the regulating val

Rising Stem Gate Valve

20230804

gate valve must be used as fully open or fully closed position where the vibration does not exist in the system. As they are designed as this purpose gate valves are not suited for regulating flow.

Intelligent Electric Valve Actuator IP67 Part Turn Electric Actuator

20240206

position travel measurement,motor monitoring and protection. Notices: 1. Only qualified personnel can have the authorization to operate these equipment 2. While above mentioned personnel is using the

Electro-Proportional Directional Control Valve

20230821

system or device. This signal is proportional to the desired position or operation of the valve. 01 Proportional Solenoid The valve contains a proportional solenoid that converts the electrical input

Swing Check Valve with Lever and Weight

20231111

position, due to the weight of the disc. Swing Check Valve With Lever And Weight FEATURES: DOUBLE FLANGE METAL SEATED&RESILIENT CHECK VALVE EN558-1 SERIES 48(DIN3202 F6) SIZE:DN50-300 PRESSURE: PN10-

Globe Control Valve with Pneumatic Actuator

20230821

Positioner: A positioner is often used alongside the actuator to precisely control the valve's position based on the input signal from the control system. Controller: The controller sends control sig

Food-Grade Industrial Grade Sanitary Stainless Steel Butterfly Valve

20230922

position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control c

MOOG VALVE 072-1702-s15fofm4vbzn

20190328

Position Defined4 [4] Internal Pilot Supply, Internal ReturnV [V] FPM (Viton)B [B] MS Connector over Port B - side (LH)Z [Z] +/- 100 mA series (+/- 200 mA parallel)N [N] Magnetic Null Adjust MOOG XCB

MAXEP Smart Valve Positioner

20231214

positioner accepts the 4~20mA valve position setting signal from the control system, and obtains the valve position setting value through A/D conversion. At the same time, the actual valve position s

Butterfly Valve, Triple Offset, Eccentric

20181129

position without rubbing. - Replaceable Seat (Spare Part) 2. Specification Range Application Size 3”(80A) ~ 80"(2000A) Fluid Water, Air, Steam, Gas Rating JIS 10K, 20K, 30K, 40K, 63K ANSI 150#,

Bettis BHH Helical Hydraulic Quarter-Turn Actuator

20200827

Position Control System Bettis PressureGuard Valve Actuators Bettis quarter turn actuators E-Series (Pneumatic & Hydraulic Scotch-Yoke) Bettis TEC2000 Actuator Bettis TorqPlus Series Valve Actuat

Zazp Zazn

20150731

position of closure member in the valve— valve spool automatically according to system control signal, and change the circulation area of valve spool and valve plate, that is to change the resi

UPVC Electric Ball Valve

20180129

position. It’s direct connection between the valve and actuator. The electric actuators with servo system inside never need be configured with the servo amplifier, whose operation can be controlle

Plug Valve

20191219

positively made on each side of the plug (double block), and the media kept in the plug port area can be bled into upstream or to the container to prevent from explosion. The Valve can be used for a

PVC Butterfly Valve with Gear or Hand Lever Type

20120502

paste.positioning accuracy ISO 5211 Mounting Pad Application: Different water system including waste water system Chemical processing/Marine or Corrosive environments Irrigation/Aquarium/Pool

Dual Expanding Plug Valve

20220516

position. About sealing: The elastic sealing ring is molded into the groove of the sliding plate. As the sealing sliding plate moves to the inlet and outlet of the valve, the sealing circle is gradua

Ball Valve

20140603

position letting you "see" the valve's position, position indicators will be applied to gearbox or actuators when required. Ball valves are durable and usually work to achieve perfect shutoff eve

API/ANSI Gate Valve

20160709

position, the sealing of the back seat can be very reliable .However, as per the requirement of API600, it is not advisable to add or change packing by the mean of back seating when the valve is pres

MARINE PRESSURE VACUUM VALVE DF50

20230317

Positioning board 1 316 11 Lifting handle 1 316 12 Bush 1 304 13 Nameplate 1 304 14 Lifting pin 1 316 15 V-valve body 1 20# 16 V-valve disc 1 316 17 V-valve seat 1 316 18 Small spacer ring of flame