EC21 Product Catalogs - solid end

Knife Gate Valve Through Conduit

20250124

solid particles. Because of its compact wafer structure, it is mainly for low pressure application. The ends can be Wafer, Lug and Flange types. Knife Gate valve is commonly used in following applic

518-F (ANSI)Clip Gate Valve OSY Solid Wedged Inside Screw

20241122

518-F (ANSI)Clip Gate Valve OS﹠Y Solid Wedged Inside Screw 1. Threaded Ends to B2.1 2. QT-A Bronze Trim 3. QT-B All Iron

PVC Valve

20240913

SOLID Application: General, Water, Oil, Gas Etc., Keyword: DN100 Butterfly Valve Size: 4" Type: Normal Open Standard: ANSI, DIN, JIS Body material: PVC,CPVC Connection: Flange Ends Color: Customer's

PVC CPVC FRPP PE ABS PPH Butterfly Valves

20240912

Characteristics:Quarter turn valve with equal percentage type flow characteristic. Moderate flow control, can be used for both on/off and modulating service. Good tolerance to suspended solids but no

Double Expanding Gate Valve, API 6D, API 6A

20240801

solid or flexible wedge options, bolted or pressure-sealed bonnets, soft or metal-seated options, and direct mounting to ISO 5211, further enhance the versatility and functionality of these valves. M

Aluminum Gas Valve

20240713

Aluminum Gas Valve Product Specification: 1. Raw Material: Al Alloy + solid brass + Mild steel; 2. Applicable for LPG, propane and butane; 3. Inlet pressure rating: CE(70mbar) and CSA (1/2 psig); 4.

PFF Flat Gate Valve

20240508

End Connection ASME B16.5ASME B1647ASME B1625ASME B16.11 Test Standard ISO 5208, API6D, API598 Operators Manual, Worm Gear, Electric Actuator, Pneumatic Actuator Kairuite stands out for its diverse r

Casting Trunnion Mounted Ball Valve

20231009

End Connection : Flanged End to ANSI B 16.5, Butt Weld ends, Stock Weld ends. Manufacturer Size and Pressure Range: NPS 2” to 48 ” (for ANSI Class 150LB) NPS 2” to 48” (for ANSI Class 300LB)

ASTM A182 F51 Swing Check Valve

20230323

Fully guided solid discProduct Range:Body material: Carbon Steel, Stainless Steel, Duplex steel, AlloyNormal diameter: 1/2 - 2 Inch (DN15 - DN50)Pressure range: 150 - 2500 LBEnd connection: RF, RTJ

Ceramic Ball Valves

20181120

solids content. Features: The hardness of the ceramic material can be higher than HRC80. Engineering internal parts of ceramic ball valve provide superior protection from corrosive and abrasive medi

Butterfly Valve

20140603

end service. All bodies shall be ductile iron 65-45-12 and bi-directional tested in both directions and be bubble tight with zero leakage. Lug bodies shall be full lug rated and all bodies shall be s

API/ANSI Gate Valve

20160709

Design of Disc Gate valves with NPS >2 are of flexible wedge gate; pav valve.pipe armaturen. Gate valves with NPS <2 are of solid wedge gate. Body and Bonnet Connection The body and bonnet of Cla

API Flanged Gate Valve

20220326

API flanged gate valve Design Features: Size:2″-56″ Pressure:Class150~2500 OS&Y, rising stem ,outside screw and yoke Flexible wedge gate valve ,solid wedge gate valve BB,Bolted bonnet,Welded seat

Butterfly Valve, Triple Offset, Eccentric

20181129

Triple Offset Butterfly Valves The basic sealing principle of a Triple off valve is to utilize a conical seating system. The laminated “body seat design” with “solid disc seat&rdquo