<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - clamp part]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/clamp part.html]]></link><item>
<title><![CDATA[Marine Parts Accessories 10mm Stainless Steel Duplex 2 Post Cable Clamp Wire Rope Clip Cable Clamp]]></title><link><![CDATA[https://huichaoec21.en.ec21.com/Marine-Parts-Accessories-10mm-Stainless--12025218_12025518.html]]></link><description><![CDATA[Introduce 
Marine Parts Accessories 10mm Stainless Steel 304/316 Duplex 2-Post Cable Clamp Wire Rope Clip Cable Clamp 
Primary advantages 
1.Preferred stainless steel material, precision casting, res]]></description><pubDate><![CDATA[20241119]]></pubDate></item>
<item>
<title><![CDATA[000000000020 Mtu Rolls-royce|clamp_mtu 16v 4000 M33s Engine Parts]]></title><link><![CDATA[https://tripolyengine.en.ec21.com/000000000020-Mtu-Rolls-royce-clamp--11941305_11941306.html]]></link><description><![CDATA[Brand: MTUParts Type:ORIGINAL CLAMP(Original MTU 331 diesel engine parts_000000000020)For MTU original engine parts MTU 16V 4000 M33S, including the 000000000020 CLAMP, we recommend requesting real-t]]></description><pubDate><![CDATA[20240523]]></pubDate></item>
<item>
<title><![CDATA[YORK  YTE  CASTING STEEL Bottom Clamp Plate , Underslung  OE 770778/01 Trailer  Suspension Parts]]></title><link><![CDATA[https://land123.en.ec21.com/YORK-YTE-CASTING--11805210_11918012.html]]></link><description><![CDATA[Our company has passed the EU E-mark certification, Australia ADR certification, TS16949 certification. Some important parts of the production have passed the LINK test in the United States. And we a]]></description><pubDate><![CDATA[20240329]]></pubDate></item>
<item>
<title><![CDATA[Welding Fixture Clamping Parts YAHANDA  Hot Products  User-friendly]]></title><link><![CDATA[https://alice2023.en.ec21.com/Welding-Fixture-Clamping-Parts-YAHANDA--11787117_11788068.html]]></link><description><![CDATA[Description:It can be put into table and fixture&apos;s hole directly to clamp and reinforce the workpieces after positioning.It is flexible and can move around and revolve. The clamping pad adapt to any ]]></description><pubDate><![CDATA[20230512]]></pubDate></item>
<item>
<title><![CDATA[API Certificated Clamps Drilling Rig Spare Parts for Polished Rod]]></title><link><![CDATA[https://zhongshigroup.en.ec21.com/API-Certificated-Clamps-Drilling-Rig--11790563_11790773.html]]></link><description><![CDATA[clamp is an important part connecting oil pump and sucker rod, it is required not only reliable, have a certain capacity, but also can not cause damage for sucker rod.
1. Chemical Composition
To meet]]></description><pubDate><![CDATA[20230516]]></pubDate></item>
<item>
<title><![CDATA[HP300 HP400 HP500 Cone Crusher Spare Parts Clamping Cylinder Seal Kits]]></title><link><![CDATA[https://onaie.en.ec21.com/HP300-HP400-HP500-Cone-Crusher--11882716_11882959.html]]></link><description><![CDATA[ONA is a professional manufacturer of crushers and crusher parts. Servicing the mining and construction industries for years, we have built up a scientific system of production, sales and services. W]]></description><pubDate><![CDATA[20240103]]></pubDate></item>
<item>
<title><![CDATA[CNC Vise Workholding Clamping System Parts Sodick Machine Tool Pallet Clamping Chuck Drawbar 3R EDM]]></title><link><![CDATA[https://hc003.en.ec21.com/CNC-Vise-Workholding-Clamping-System--11877601_11877640.html]]></link><description><![CDATA[we manufacture compatible EROWA,System3R Tooling ,workholding fixture, precision chuck ,Clamping System ,Electrode Holder ,EDM vise,EROWA pallet, EROWA centering plate,chucking spigot,EROWA electrode]]></description><pubDate><![CDATA[20231220]]></pubDate></item>
<item>
<title><![CDATA[304,316 Stainless Steel Glass Clamp,Glass Spider Claws,Glass Curtain Wall Parts]]></title><link><![CDATA[https://lewisliu423.en.ec21.com/304-316-Stainless-Steel-Glass--10977090_10977091.html]]></link><description><![CDATA[我公司采用欧盟和美国先进国家的公差和材料标准，
产品材料已获得测试报告，我们的产品符合欧盟Rohs 
指令2005/95 / EC及其补充指令2005/618 / EC的要求]]></description><pubDate><![CDATA[20190705]]></pubDate></item>
<item>
<title><![CDATA[Elbow Repair Clamp for Elbow Repair or Welded Part Protection]]></title><link><![CDATA[https://mpjw.en.ec21.com/Elbow-Repair-Clamp-for-Elbow--9401907_9402337.html]]></link><description><![CDATA[MJER(13A~500A) - Utility Model 
Elbow Repair Clamp is useful for repairing damaged or leaking pipes at elbow, or covering welded part to protect it. This is top-bottom separated type, like MJD. 
Mate]]></description><pubDate><![CDATA[20230217]]></pubDate></item>
<item>
<title><![CDATA[Tool Parts/Tool Accessories/Insert Screw/Torx Key/Allen Key/Alloy Shim/Clamp/Clamp Screw/Shim Screw]]></title><link><![CDATA[https://pandevida.en.ec21.com/Tool-Parts-Tool-Accessories-Insert--3836717_3837127.html]]></link><description><![CDATA[Clamp for Lathe Tool,P type Lever for Lathe Tool Holder,wrench,star screw, 
CNC lathe tool parts/accessories,Hardware Parts and so on! 
Tool box/package,plastic package/packaging,plastic cutting tool]]></description><pubDate><![CDATA[20160511]]></pubDate></item>
<item>
<title><![CDATA[Robot Gripper for Handling 3C Flat Parts,Robot Gripper, Robotic Clamps]]></title><link><![CDATA[https://xuanyu20180608.en.ec21.com/Robot-Gripper-for-Handling-3C--11732968_11732992.html]]></link><description><![CDATA[The combination of robot grippers is applied to planar parts in the 3C field.
It is suitable for high-precision plugging and unplugging
of precision electronic instruments, as well as related accesso]]></description><pubDate><![CDATA[20230226]]></pubDate></item>
<item>
<title><![CDATA[AC Isolation Switch Solar Panel Isolator Switch AC Isolator in AC PV System Solar AC Isolator]]></title><link><![CDATA[https://new-pv.en.ec21.com/AC-Isolation-Switch-Solar-Panel--11864894_11867428.html]]></link><description><![CDATA[clamping screws per tunnel provide equal stripping lengths and secureclamping for all cables. Terminal bore size is 5 x 6.6mm.
Included in the range are 1,2, 3 and 4 pole switches from 20 to 80 Amps.]]></description><pubDate><![CDATA[20251115]]></pubDate></item>
<item>
<title><![CDATA[Brush Plating Tin Equipment for Copper Busbar, Copper Terminal Block]]></title><link><![CDATA[https://creview.en.ec21.com/Brush-Plating-Tin-Equipment-for--12015860_12055143.html]]></link><description><![CDATA[clamp to connect the workpiece to the negative terminal of the power supply.Auxiliary Equipment: Cleaning Solutions : For removing oil, grease, and dirt from the workpiece before plating.Activators :]]></description><pubDate><![CDATA[20250522]]></pubDate></item>
<item>
<title><![CDATA[Hem 100000L(100T) Fermentation Tank]]></title><link><![CDATA[https://hembeerequipment.en.ec21.com/Hem-100000L-100T-Fermentation--12028571_12034537.html]]></link><description><![CDATA[part of the production process. Accessories for expansion of the modular cylindrically-conical tanks: manhole, butterfly valve, Sample valve, Safety valve, Venting valve, Thermometer socket, Manomete]]></description><pubDate><![CDATA[20260401]]></pubDate></item>
<item>
<title><![CDATA[M Shape Number 0~9 Letter A~Z Colorful  POM Network Ethernet Wire Cable Markers]]></title><link><![CDATA[https://keyusce.en.ec21.com/M-Shape-Number-0-9--12059649_12063307.html]]></link><description><![CDATA[POM Coloured Cable Markers
POM Coloured Cable Markers is made of POM material, The product is designed by M shape, it is easy to be stable when it is used on the clamping line and it&apos;s not easy to tu]]></description><pubDate><![CDATA[20251218]]></pubDate></item>
<item>
<title><![CDATA[China Wholesale Cold Cut Saw Supplier]]></title><link><![CDATA[https://ydsools302.en.ec21.com/China-Wholesale-Cold-Cut-Saw--12053531_12053539.html]]></link><description><![CDATA[particularly suitable for precision metal cutting. One of their key benefits is the ability to generate significantly less heat, which minimizes the risk of material distortion. The cutting process i]]></description><pubDate><![CDATA[20250401]]></pubDate></item>
<item>
<title><![CDATA[Wrist Action Shaker Machine Flask Manufacturer Burrell]]></title><link><![CDATA[https://micratechno.en.ec21.com/Wrist-Action-Shaker-Machine-Flask--9393250_9393251.html]]></link><description><![CDATA[parts
Speed regulator: 80 - 550 rpm (oscillations)
Features:
Mimic the side-to-side stroke of hand mixing with flasks up to 500 mL.
Timer can be set from 0 to 60 min (mechanical timer) or 999 hours (]]></description><pubDate><![CDATA[20250327]]></pubDate></item>
<item>
<title><![CDATA[Copper Bonded/Clad Steel Wire Coil for Grounding/Earthing Conductor (IEC62561,UL Listed)]]></title><link><![CDATA[https://sunlightweld.en.ec21.com/Copper-Bonded-Clad-Steel-Wire--11685147_11693467.html]]></link><description><![CDATA[clamp or the vise jaws, the spacing is smaller than the diameter of the sample steel core(W=d-0.1),hammer the end of the sample, cut off enough copper layer, fully expose the steel core, the exfoliat]]></description><pubDate><![CDATA[20250325]]></pubDate></item>
<item>
<title><![CDATA[Spider Glass Curtain Wall]]></title><link><![CDATA[https://lindon789123.en.ec21.com/Spider-Glass-Curtain-Wall--12051101_12051106.html]]></link><description><![CDATA[parts, so the procurement cycle is short, which is suitable for the special situation of the urgent construction period of this project.
5. Easy to install and easy to adjust. Basically, they are bol]]></description><pubDate><![CDATA[20250322]]></pubDate></item>
<item>
<title><![CDATA[Rail Dog Spikes,Track Spikes,Nail Spikes,Railroad Spikes]]></title><link><![CDATA[https://ss2025.en.ec21.com/Rail-Dog-Spikes-Track-Spikes--12050610_12050611.html]]></link><description><![CDATA[Railroad dog spike,Track Spikes,Nail Spikes,Railroad Spikes
Signum Railway specialize in producing rail fastening parts. Rail dog spikes are our featured products, which is in accordance to AREMA,DIN]]></description><pubDate><![CDATA[20250322]]></pubDate></item>
<item>
<title><![CDATA[HITACHI Engine Parts]]></title><link><![CDATA[https://asdieselparts.en.ec21.com/HITACHI-Engine-Parts--7035224_12048589.html]]></link><description><![CDATA[A&amp;S Diesel Parts Co.,Ltd. supplies all types of HITACHI engine parts,
Diesel engine, Accessory belt, Air duct, Air intake housing, Air intake, manifold, Camshaft, Camshaft bearing, Camshaft fastener,]]></description><pubDate><![CDATA[20250317]]></pubDate></item>
<item>
<title><![CDATA[Automatic Rotary Ring Wrapper]]></title><link><![CDATA[https://eopacmachinery.en.ec21.com/Automatic-Rotary-Ring-Wrapper--11961513_12049051.html]]></link><description><![CDATA[clamp unit with hot wire film cutting which incorporates also the device for final sealing of the film tail
3. Heavy duty design and famous brand parts ensure long life and minimum maintenance.
4. Wo]]></description><pubDate><![CDATA[20250314]]></pubDate></item>
<item>
<title><![CDATA[15T Heavy Duty Horizontal Lathe Machine]]></title><link><![CDATA[https://havenmachine.en.ec21.com/15T-Heavy-Duty-Horizontal-Lathe--11420430_12048729.html]]></link><description><![CDATA[parts may be turned through the heavy cutting by carbon alloy tools.
Understanding the heavy duty lathe machine
Introduction
When it comes to precision machining, industries such as manufacturing, au]]></description><pubDate><![CDATA[20250313]]></pubDate></item>
<item>
<title><![CDATA[Glass Spigot]]></title><link><![CDATA[https://prewell2023.en.ec21.com/Glass-Spigot--12047217_11818675.html]]></link><description><![CDATA[Glass Spigot
Warranty: Lifetime
After-sale Service: Online technical support, Onsite Installation, Onsite Training, Onsite Inspection, Free spare parts, Return and Replacement
Project Solution Capabi]]></description><pubDate><![CDATA[20250306]]></pubDate></item>
<item>
<title><![CDATA[High Quality Screw Air Compressor for Laser Cutting Machine]]></title><link><![CDATA[https://sdspartan.en.ec21.com/High-Quality-Screw-Air-Compressor--12045641_12045644.html]]></link><description><![CDATA[part is used as a power gas source to supply the cylinder of the clamping worktable, and the other part is used to blow and remove dust from the optical system. The compressed air discharged from the]]></description><pubDate><![CDATA[20250227]]></pubDate></item>
<item>
<title><![CDATA[TSM24BDBZR,Passive and Discrete,Diodes,TVS Diodes,TSM24B]]></title><link><![CDATA[https://jinhaixiang.en.ec21.com/TSM24BDBZR-Passive-and-Discrete-Diodes--12044552_12044606.html]]></link><description><![CDATA[clamping voltage of 33 V (typical) at 20 A for 8/20 µs surge current protects downstream componentsUnidirectional polarity for optimized clamping performance on single ended data lines and power rai]]></description><pubDate><![CDATA[20250222]]></pubDate></item>
<item>
<title><![CDATA[Veneer Slicer]]></title><link><![CDATA[https://ada20168.en.ec21.com/Veneer-Slicer--10917565_12042110.html]]></link><description><![CDATA[clamping mode adopts hydraulic control, without manual tightening, which is easy to operate and improves the efficiency.
　　Centralized electrical control box, hydraulic and electrical linkage, si]]></description><pubDate><![CDATA[20250211]]></pubDate></item>
<item>
<title><![CDATA[Coupling  Clamps]]></title><link><![CDATA[https://beisai888.en.ec21.com/Coupling-Clamps--8414007_10135224.html]]></link><description><![CDATA[DIN EN877 COUPLINGS /CLAMPS AND GRIPS
Strip Materail and Fixed parts: S.S 1.4301/1.4571/1.4510 as per EN10088(AISI304/AISI316/AISI439)
Bolt: Round head screws with hexagon socket with zinc plated
Sea]]></description><pubDate><![CDATA[20250206]]></pubDate></item>
<item>
<title><![CDATA[GOANWIN C1N C-Frame Single Crank Power Press for Hinge, Slide Rail, Hardware Stamping Parts]]></title><link><![CDATA[https://goanwin.en.ec21.com/GOANWIN-C1N-C-Frame-Single--12040891_12040985.html]]></link><description><![CDATA[parts
, aluminum foil lunch box, notebook AB parts keyboard and cover.
Description 
The GOANWIN C1N Series C-Frame Single Crank Power Press is a versatile and high-performance machine designed for a ]]></description><pubDate><![CDATA[20250201]]></pubDate></item>
<item>
<title><![CDATA[JIS Pressed Swivel Coupler]]></title><link><![CDATA[https://gdscaffold6.en.ec21.com/JIS-Pressed-Swivel-Coupler--11865997_12038724.html]]></link><description><![CDATA[JIS Standard Pressed Swivel Coupler 
or scaffolding clamp is the main part of the tubular scaffolding system, it plays a fasten and connection functions in system. The product material uses standard ]]></description><pubDate><![CDATA[20250122]]></pubDate></item>
<item>
<title><![CDATA[Laser Welding Diamond Chain for Concrete Chainsaw]]></title><link><![CDATA[https://diamondblades.en.ec21.com/Laser-Welding-Diamond-Chain-for--11974564_11974677.html]]></link><description><![CDATA[partment and to repair the building and with minimal damage to the surrounding structure Monument with parts removed.
Recently, a concrete diamond chain saw with a 230-volt electric motor was also de]]></description><pubDate><![CDATA[20250117]]></pubDate></item>
<item>
<title><![CDATA[Aimag H 3-A Sanitary 316L Medicine Milk Food &amp; Beverage Industry Hygienic Magnetic Flowmeter]]></title><link><![CDATA[https://artang.en.ec21.com/Aimag-H-3-A-Sanitary--11676180_11680504.html]]></link><description><![CDATA[clamp connection, easy to electromagnetic flowmeter rapid disassembly, cleaning, so that the electromagnetic flowmeter is not easy to be contaminated in the use of the process, and can effectively pr]]></description><pubDate><![CDATA[20250110]]></pubDate></item>
<item>
<title><![CDATA[2 Part Mill Table]]></title><link><![CDATA[https://grace508.en.ec21.com/2-Part-Mill-Table--1506977_7120569.html]]></link><description><![CDATA[2 Part Mill Tables are usually using for mill machine tools, which is produced as per the following technical requirements:
Material: gray cast iron GG25 (HT-250)
Machined around the upper edge surfa]]></description><pubDate><![CDATA[20250110]]></pubDate></item>
<item>
<title><![CDATA[2 Part Mill Table for CNC Machine]]></title><link><![CDATA[https://hbjg.en.ec21.com/2-Part-Mill-Table-for--1878057_7120627.html]]></link><description><![CDATA[2 Part Mill Tables are usually using for mill machine tools, which is produced as per the following technical requirements:
Material: gray cast iron GG25 (HT-250)
Machined around the upper edge surfa]]></description><pubDate><![CDATA[20250110]]></pubDate></item>
<item>
<title><![CDATA[Swimming Pool Leaf Skimmer Net, Reinforced Frame Deep Rake Net, Leaf Rake, Pool Rake, Pool Skimmer]]></title><link><![CDATA[https://ninjapool.en.ec21.com/Swimming-Pool-Leaf-Skimmer-Net--12034305_12034320.html]]></link><description><![CDATA[clamped in the pole hole
Handle Φ 1&apos;/8&quot; works with standard pool pole with a 1-1/4&quot; diameter(pole not included)
90-day warranty. If you aren&apos;t satisfied with the product within the first 90 days of ]]></description><pubDate><![CDATA[20250102]]></pubDate></item>
<item>
<title><![CDATA[DC Wire Clamp for Lightning Protection &amp; Earthing]]></title><link><![CDATA[https://yydq24002.en.ec21.com/DC-Wire-Clamp-for-Lightning--12029255_12031948.html]]></link><description><![CDATA[PRODUCT DESCRIPTION
Specification
Part No.
Application of Cable
YY-GW50 
50mm2
YY-GW70 
70mm2
YY-GW95 
95mm2
YY-GW120 
120mm2
YY-GW150 
150mm2
YY-GW185 
185mm2
Material
Brass
*Uses A DC Wire Clamp is]]></description><pubDate><![CDATA[20241218]]></pubDate></item>
<item>
<title><![CDATA[5 Axis Vise - Silvercnc]]></title><link><![CDATA[https://rotarytable.en.ec21.com/5-Axis-Vise--11776975_12031966.html]]></link><description><![CDATA[The 5 Axis Vise by Silvercnc is a precision-engineered clamping solution designed for high-performance machining and intricate workpieces.
Ideal for CNC milling operations, this vise enhances product]]></description><pubDate><![CDATA[20241218]]></pubDate></item>
<item>
<title><![CDATA[OEM Odm Customized CNC Machining Service]]></title><link><![CDATA[https://beyondwon.en.ec21.com/OEM-Odm-Customized-CNC-Machining--12028366_12030669.html]]></link><description><![CDATA[partnership.
Architectural hardware: glass fitting, glass hardware, staircase, handrail, glass fence, pool fence, railing, glass railing, balcony railing, balustrade, glass spigot, glass clamp, glass]]></description><pubDate><![CDATA[20241211]]></pubDate></item>
<item>
<title><![CDATA[HOWO Boom Truck/Truck Mounted Crane]]></title><link><![CDATA[https://howotrailer.en.ec21.com/HOWO-Boom-Truck-Truck-Mounted--11860324_12026330.html]]></link><description><![CDATA[1. HOWO truck mounted crane
has two parts: the carrier, often referred to as the chassis with a cargo compartment, it can be a 8*4, 6*4 or 4*2 chassis subject to customer needs, a power take-off, and]]></description><pubDate><![CDATA[20241121]]></pubDate></item>
<item>
<title><![CDATA[Induction Hardening Machine]]></title><link><![CDATA[https://duolin.en.ec21.com/Induction-Hardening-Machine--12026187_12026192.html]]></link><description><![CDATA[clamp workpieces with the largest diameter.
3: Variable frequency speed regulating motor to rotate the quenching part, protect the motor from wet environment
4: The quenching transformer moves throug]]></description><pubDate><![CDATA[20241121]]></pubDate></item>
<item>
<title><![CDATA[Automatic PET Bottle Injection Stretch Blow Molding Machine]]></title><link><![CDATA[https://moldingmachinetepai.en.ec21.com/Automatic-PET-Bottle-Injection-Stretch--11547701_12021575.html]]></link><description><![CDATA[parting line are perfect, bottle is stronger.
Injection stretch blow moulding machine is compact, from the raw material to the finished product, it can reduce equipment investment cost greatly and sa]]></description><pubDate><![CDATA[20241031]]></pubDate></item>
<item>
<title><![CDATA[500kg Bulk Bag Vacuum Sealing Machine]]></title><link><![CDATA[https://henll2024.en.ec21.com/500kg-Bulk-Bag-Vacuum-Sealing--12020738_12020739.html]]></link><description><![CDATA[part is sprayed with plastic steelExplosion-proofExplosion proof typeNon-explosion proof typeSpeed8bag/hour
Product Introduction: 
The box type lifting vacuum sealing machine is one of Henll&apos;s patent]]></description><pubDate><![CDATA[20241025]]></pubDate></item>
<item>
<title><![CDATA[Mounting Brackets]]></title><link><![CDATA[https://kippwerk.en.ec21.com/Mounting-Brackets--10420593_10420725.html]]></link><description><![CDATA[clamping slots fix the component in place when screwing it to the mounting bracket, which makes it easier to use. The mounting brackets can be combined with many KIPP operating parts. Lightweight alu]]></description><pubDate><![CDATA[20241024]]></pubDate></item>
<item>
<title><![CDATA[CF8x4 Feeder CN081E CN081C for JUKI]]></title><link><![CDATA[https://beckysu.en.ec21.com/CF8x4-Feeder-CN081E-CN081C-for--8604211_9765034.html]]></link><description><![CDATA[parts.
FTR Type
32mm - 56mm tape feeder. Featuring deep pocket for tall parts, wide range of feeding pitches increments, large sprocket for smoother advance of parts, toggle clamp locking mechanism f]]></description><pubDate><![CDATA[20241015]]></pubDate></item>
<item>
<title><![CDATA[Button for ConMed Linvatec Ergo D4240 Shaver Handpiece]]></title><link><![CDATA[https://jdp2016.en.ec21.com/Button-for-ConMed-Linvatec-Ergo--11466340_11016750.html]]></link><description><![CDATA[parts, Rigid endoscope parts and Flexible endoscope parts, we also provide trading and service of Surgical Instrument like ureteral renal forceps, electrocoagulation hook, mirror sheath, gravel needl]]></description><pubDate><![CDATA[20241010]]></pubDate></item>
<item>
<title><![CDATA[Brand New Sram Red AXS 2x12 with Powermeter Groupset]]></title><link><![CDATA[https://gearcycles.en.ec21.com/Brand-New-Sram-Red-AXS--12014684_12014953.html]]></link><description><![CDATA[part to a modified pivot point and the relocation of the primary piston to the shifter body, the brakes can be applied with just one finger both in the lower handlebars and in the hoods. Another high]]></description><pubDate><![CDATA[20241009]]></pubDate></item>
<item>
<title><![CDATA[Bolts,Nuts,Washer,Pernos,Tuercas]]></title><link><![CDATA[https://ruihongparts.en.ec21.com/Bolts-Nuts-Washer-Pernos-Tuercas--12013509_12013516.html]]></link><description><![CDATA[Clamp T-Bolt Spr Part 
Bolt-Flange Head Part 
High Tensile Alloy Steel Caliper Bracket Bolt 10.9 
Cylinder Head Bolt
Swing Bolt 
Bolt-Hanger 
Valve Parts-Stop Bolt 
Wheel Bolt Assebly
Finished Hex Nu]]></description><pubDate><![CDATA[20241004]]></pubDate></item>
<item>
<title><![CDATA[Urinary Leg Bag]]></title><link><![CDATA[https://maysino.en.ec21.com/Urinary-Leg-Bag--11244571_11310047.html]]></link><description><![CDATA[parts), with needle or needleless sample port.
With bed sheet clamp.
With reinforced double hanger and rope hanger, with T valve.
Latex-free, Packed sterile.
Four different types of sample port are a]]></description><pubDate><![CDATA[20240926]]></pubDate></item>
<item>
<title><![CDATA[Concrete Pump Parts Seamless Pipe]]></title><link><![CDATA[https://sdblpumpparts.en.ec21.com/Concrete-Pump-Parts-Seamless-Pipe--11092095_11092098.html]]></link><description><![CDATA[parts my company can also supply for you :
About other concrete pump spare parts which are used on the mobile pump and stationary pump , including concrete pump elbow, concrete pump clamp coupling, c]]></description><pubDate><![CDATA[20240919]]></pubDate></item>
<item>
<title><![CDATA[D28 Steel 3D Welding Table]]></title><link><![CDATA[https://chinasurfaceplate.en.ec21.com/D28-Steel-3D-Welding-Table--12007013_12007016.html]]></link><description><![CDATA[parts for locating
3. Tools for clamping and fixing
4. Spare parts for locking working pieces
5. Auxiliary tools
Features OF Precision 3D Welding Table
:
• Superior Quality: Made from high-quality ]]></description><pubDate><![CDATA[20240919]]></pubDate></item>

</channel>
</rss>