Continuous Cast Slabs Wholesale

MDC-K120 Slab Mold Taper Measuring Instrument

• Min. Order:  

  1 Piece

• Price:  

  US$ 5000

• Place of origin:  

  China

MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets’ quality and the continuous introduction of high-preci

[Related Keywords : slab taper measurement, taper mold measuring, mold measuring tool]

SPD-V010 Handheld Roll Gap Checker

• Min. Order:  

  1 Piece

• Price:  

  US$ 5000

• Place of origin:  

  China

slabs, and it is convenient to use the extension rod to send the measuring body into the continuous casting section to measure inside and we can see measurement data on the checker outside. The measuring range of instrument type handheld roll gap checker is 120mm - 400mm This hand-held roll gap meter is light and compact, and it is convenient to carry during maintenance. The measurement value can

[Related Keywords : roll gap checker, roll gap adjustment, roll gap checker caster]

Mould Oscillation and Deflection Detection Instrument

• Min. Order:  

  1 Piece

• Price:  

  US$ 5000

• Place of origin:  

  China

continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can

[Related Keywords : mold oscillation frequenc, mould oscillation steel, mould oscillator checker]

Mould Online Width Adjustment and Taper Measurement

• Min. Order:  

  1 Piece

• Price:  

  US$ 5000

• Place of origin:  

  China

continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient continuous casting. The online mold width adjustment system enables the two narrow sides of the continuous casting slab mold to move inward or outward in sma

[Related Keywords : mold taper checker, mould taper gauge, mold measuring tool]

Infrared Laser Cut-to-Length Cutting System

• Min. Order:  

  1 Piece

• Price:  

  US$ 5000

• Place of origin:  

  China

continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-48 billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces

[Related Keywords : cut to length lines, cutting metal strip, blanking line]

Steel Slab

• Min. Order:  

  1 Metric Ton

• Price:  

  US$ 3000

• Place of origin:  

  China

slabs for sale, welcome to consult. Continuous casting slab production process. The molten steel is continuously poured into the water-cooled copper mold. The slab shell is solidified gradually along the periphery of the mold. When the liquid level of the steel rises to a certain height and the shell solidifies to a certain thickness, the cooling water will be sprayed to cool the slab completely,

[Related Keywords : Steel Slab]

Steel Bloom

• Min. Order:  

  1 Metric Ton

• Price:  

  US$ 3000

• Place of origin:  

  China

cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting. Production Procedure of Steel Bloom The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated

[Related Keywords : Steel Bloom]

Hot Rolled Steel Sheet

• Min. Order:  

  20 Unit

• Price:  

  US$ 3000

• Place of origin:  

  China

• Supply Ability:  

  more than 20,000 MT per year

Hot Rolled Steel Sheet Production Process The production procedure of HRS is generally as follows: Iron making → steel making → continuous casting (or die casting) → hot rolling process Hot Rolled Sheet production is a rolling procedure that relates rolling steel at a high temperature (usually above 1700°F) and over the recrystallization temperature of hot rolled sheet. When the steel heat

[Related Keywords : hot rolled steel sheet]

Copper Mould Tube & Plate

• Place of origin:  

  China

• Supply Ability:  

  50000MT/Year

continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012. Copper Mould Tube supplier The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremel

[Related Keywords : Copper Mould Tube]

Factory Directly Supply Hot Rolled Welded Galvanized Drip Irrigation Pipe with Low Price

• Min. Order:  

  5 Ton

• Price:  

  US$ 720~780

• Place of origin:  

  China

• Supply Ability:  

  12000T per years

continuous casting machine to make plate, billets, and blooms. This raw steel must be converted to a form that can be rolled into pipes of specific dimensions or stretched into hollow tubes. There are two main intermediate steel products that are used to make steel pipes: Steel skelp is made from slabs that are heated to 2,200°F. The heat causes a scale to form on the surface, which must be remo

[Related Keywords : steel pipe, black iron pipe, drip irrigation pipe]

Mild Carbon Erw Welded EMT 150mm Ductile Iron Pipe

• Min. Order:  

  5 Ton

• Price:  

  US$ 720

• Place of origin:  

  China

• Supply Ability:  

  12000T per year

continuous casting machine to make plate, billets, and blooms. This raw steel must be converted to a form that can be rolled into pipes of specific dimensions or stretched into hollow tubes. There are two main intermediate steel products that are used to make steel pipes: Steel skelp is made from slabs that are heated to 2,200°F. The heat causes a scale to form on the surface, which must be remo

[Related Keywords : ductile iron pipe]

Extruded Magnesium Alloy Rod Slab Bar AZ31B AZ61 AZ91 For Bicycle Tube Wheelchairs

• Place of origin:  

  China

Extruded Magnesium Alloy Rod Slab Bar AZ31B AZ61 AZ91 For Bicycle Tube Wheelchairs Semi-continuous casting bar is widely used in the magnesium alloy processing board,belt, rob and bar. it is also used to alloy ingots and other boards. Processing technology: Compared with traditional magnesium alloy, Semi-continuous casting has higher strength and extensibility on its organization and compositio

[Related Keywords : magnesium alloy rod, magnesium bar stock]

Steel Sheet

• Min. Order:  

  10 Ton

• Price:  

  US$ 500

• Place of origin:  

  China

continuous casting slab or the blooming slab as the raw material, and is heated by the walking furnace.  Rolling the pressure processing process of changing the shape of the billet between the rotating rolls is called steel rolling. The rolling method can be divided into hot rolling and cold rolling according to different rolling temperatures.  cooling After cooling, leveling, and rolling,

[Related Keywords : Steel Sheet]

Fabric Form

slab of nominal thickness. Construction of concrete matting starts with the positioning and securing of the mattress on the ground profile. Special pipes are inserted to the bottom of the frame work. Colloid sand-cement mix is then pumped into position as the pipes are gradually withdrawn to the surface. Pumping in this way under low pressure ensures continuity and uniformity of the filler and

[Related Keywords : Erosion, Slope protection, Canal protection, Polyester]

Rolling Slabs

Offer prime over rolling slabs prime over rolling slabs ex Big German mill. Material is prime overproduction. All soft commercial quality, max ST 52 or 500 N/mm?. Unpacked as per pictures. Killed material from continues cast. Material on the pictures is part form packing list. What you see is what you get ! Quantity : about 2000 MT Price : make a bid Delivery : in 40? heavy tested containers,

[Related Keywords : Rolling Slabs]