EC21 Product Catalogs - melt pressure

1/2-20 Built-in Pressure Transmitter Melt Pressure Gauge

20191210

Introduction: PT135 series high temperature melt pressure gauge is widely used in high temperature melt pressure measurement and control of chemical fiber, oil, brewing and plastics industries under

AST510 Melt Pressure Transducer

20230623

Description: AST510 Series melt pressure transducer designed with rigid stem and flexible stem. The model 510T comes with thermocouple, which can measure the pressure and temperature at one point. Th

Used Tires/Tyres Cheap Price Used Car Tires Scrap Germany / Japan

20260527

Pressure and 9000 Nm Capacity$10,000-30,000 / piece2 pieces Halal Frozen Brazilian Chicken Neck Caffeinated with Dried Style Boneless Skinless Mason Jar Packaging$35-75 / metric ton5 metric tons Open

Glycerol

20260525

Melting point 20 °C(lit.)Boiling point 290 °Cdensity 1.25 g/mL(lit.)vapor density 3.1 (vs air)vapor pressure <1 mm Hg ( 20 °C)refractive index n20/D 1.474(lit.)FEMA 2525 | GLYCEROLFp 320 °Fstorag

Refined Glycerine Usp Grade 99.5%

20260516

Melting Point: 20 °C(lit.) Boilting Point: 290 °C(lit.) Density : 1.261 g/mL at 25 °C(lit.) Vapor density : 3.10(vs air) Vapor pressure : 0.08mm Hg (20 °C) Refractive index : n20/D 1.474(lit.)

PP Melt Blown Filter Cartridge

20260406

10", 20", 30", 40" Outer Diameter: 62mm ±2 Inner Diameter: 28 / 30mm Operating Temp. / Replacement Pressure Max Temp: 60℃ Recommended Change-out Pressure: 1.5 bar

Liquid Polyisoprene Rubber (LIR-563)

20260408

pressure sensitive adhesives and hot melts, rubber type adhesives or sealants for automotive industry, tape adhesive,code-resisting adhesive and other industrial solvent type adhesive ect. Package Pa

MDO PE Film Custom Manufacturer Professional PE Film Solution Provider

20260330

pressure resistance: The MDO-PE film have higher resistance so it can withstand higher pressure. This is helpful in bag making and shipping with filled products Minimal deformation: The MDO-PE film w

2-FLUORO-2'-Bromobiphenyl(CAS#1554-05-8)

20260304

2-Fluoro-2'-Bromobiphenyl(CAS#1554-05-8),physical properties Appearance: Usually white crystals or powdery solids. Melting point: 39-41 ℃. Boiling point: 338.9 ° C (at 760 mmHg pressure). Density:

The Waterproof and Insulated Intermediate Connection Heat Shrink Terminals Are Used for Wire Connect

20260205

melt adhesive with excellent waterproof performance 3.The extension of excellent performance, mechanical damage 4.Ensure outer pressure is not damaged 5.Good electrical conductivity 6.High elasticity

Wash Basin Water Filter

20260529

ABS, PC, PP, Silicon, Stainless steel Operating conditions: 0 to 70 degrees / 0.05 to 0.3 MPa (water pressure) Filter replacement: 2-3 months (It may vary depending on water quality.)

Terephthaloyl Chloride(CAS#100-20-9)

20250914

pressure, and the distillate is collected at 68-75 ℃ (1.866kPa) to obtain the final product. Obtained by the reaction of terephthalic acid and dichlorosulfoxide. Chlorine gas is introduced in the p

Hangover Drink - HWAK KKAENDA

20250531

pressure , myocardial infraction, poststroke, etc. Balsam Good for detoxification, robust, diabetic, alcohol poisoning and blood vessel disease Contain abundant botany insulin activate burning sugar

PPP Natural Cocoa Butter and Deodorized Cocoa Butter

20250401

Cocoa Butter is the fat of the cocoa bean, extracted by hydraulic pressure from the cocoa mass. It is a Pure Prime Pressure (PPP) butter, thus maintaining all its crystallization properties and the n

Isosorbide

20250322

and glaucoma. Density: 1.475g/cm3 Melting point: 56-62℃ Boiling point: 372.1°C at 760 mmHg Flash point: 178.8°C Vapor pressure: 4.71E-07mmHg at 25°C Character: light yellow or white crystal

Chlorosulphonated Polyethylene Rubber (CSM)

20250320

pressures, high manufacturing costs, hazardous nature of manufacturing the product, as well as commercial pressures all probably contributed to DuPont’s decision to discontinue the production of th

Tetrahydro Methyl

20250320

Melting point: -136°CBoiling point: 78-80°C(lit.)Density: 0.86g/mLat25°C(lit.)Vapor pressure: 136hPa(20°C)Refractive index: n20/D1.406(lit.)Flash point: 10.4°FStorage condition: Storebelow+30°C

FPV Filter Pressure Value Tester

20250316

melt is passed through a standard filter screen after precise measurement, and the change of pressure in front of the screen is its filter value. The change of this filter value index allows to judge

High Quality Spunbond Nonwoven Lab Machine

20250316

pressure rolls with different patterns, also suitable for use in the technology of Spun-lace nonwovens. ○ The combination of the equipment can be configured according to application needs. ○ Chan

Factory Customize High Temperature Resistance Graphite Rocket Nozzle Price

20250306

pressure gas to supersonic speed and convert it into thrust. 2. Structural stability guarantee: Graphite nozzles can also maintain dimensional stability in the metal-rich particle scouring environmen

DDODDOMAM ORGANIC RICE STICK - 20g/Ea

20250228

we found the best size for gripping and crunchiness. No additives: No addition of flavorings, color, preservatives, and leavening agent. NOT fried in oil and only made with heat and pressure.

Tungsten Electrode for Automotive Welding High Performance NDB Tungsten Electrode

20250220

melt forms, allowing for a join at specific points.This method demands significant currents and pressing forces.Especially with thicker materials, the pressure exerted on the welding electrodes can g

Ice Cream Continuous Freezer

20250213

pressure from 2 to 10 bars, which allows connections to fruit feeders, dispensers, or automatic filling machines for cups, sundaes, cones, and containers, without losing pressure - assuring stability

Biomass Burner

20250211

pressure operation, silo isolation transportation method, no tempering and de-firing phenomenon, has applied for national invention patent. 4. Low-carbon environmental protection: low smoke, sulfur a

Kunlun Brand Virgin HDPE Resin/HDPE Granules/High Density Polyethylene

20250206

pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can

Plasma Gas Combustion Cathode

20250206

pressure conditions of plasma gas combustion while maintaining excellent stability to ensure a continuous combustion process. From a material perspective, the 9MB electrode is made of high-quality tu

Prime Virgin Silver Liquid Mercury of 99.99% Pure Availabel for Sale.

20250110

Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decompositi

Pleated Filter Cartridges 10inch 250mm Polypropylene PP 0.2micron Membrane Industrial Dust Removal

20241231

pressure loss perspective. It's thermo-sealing method provides structural stability. Electric & electronic industry : DI Water, pre-treatment filter for revere osmosis and membrane pre-treatment filt

Lab Ultrapure Water System Q-STER

20241230

pressure and temperature of raw water; quality and volume of pure water; quality, TOC value, quantitative water withdrawal, cumulative water withdrawal of ultrapure water; Data traceability with stor

Rock Wool Slab

20241226

Pressure resistance>25Kpa; 10%: Pressure resistance>40Kpa. Moisture resistance: Rockwool acoustic slabs are waterproof and have a good ability to release water vapor pressure to the roof structure. P

Top Quality Silvery Mercury/Hg Liquid 99.999% Min for Gold Mining!

20241219

pressure: 0.002 mm hg at 25c- vapor density: 7.0- evaporation rate: not available.- viscosity: 15.5 mp at 25 dig c- boiling point: 356.72 dig c- freezingmelting point:-38.87 dig c- decomposition temp

Excellent Sandblast Boron Carbide (B4C) Nozzle for Blasting and Cleaning

20241218

pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characte

HDPE Q TR-571 Resin Lotrene for Extrusion Blow-Bottles

20241217

pressure and is therefore also called low-pressure polyethylene.HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can

Supply 0.8mm Tungsten Filaments Tungsten Wire for E Beam Evaporation Equipment

20241210

melting point, high resistance, high strength, low evaporation pressure Product process Extrusion, cutting, profiled machining Value-added services size and shapes can be produce as your drawings Rel

ZLPG-10 Herbal Extract Spraying Dryer

20241205

largely reduce energy consumption. Incoming and outgoing temperature as well as pressure inside the tower can be set up precisely. FOR MORE INFORMATION PLEASE CONTACT US:HOPELAND CHEM-TECH CO.,LTD

Aluminum Casting

20241126

pressure die casting, continuous casting, shell mold casting, etc. Each aluminum casting process will have its advantages and disadvantages. Depending on the casting’s size and complexity, we can

100% Pure Red Liquid Mercury Supplier.

20241120

Pressure : 0.002 mm Hg at 25c Vapore Density : 7.0 Evaporation Rate : Not available Viscosity : 15.5 mp at 25 dig C Boiling Point : 356.72 dig C Freezing/Melting Point : 38.87 dig C Decomposition Tem

Kunlun HDPE Granules /Virgin HDPE Plastic Granules / Virgin HDPE Plastic Resins

20241114

pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can

Mucisions Die Casting Service

20241111

melting temperatures, die casting works by injecting molten metal into the die cavity, which adopts the part’s shape and solidifies before removal. Die casting can be low- or high-pressure, employi

EPE Foam Sheet Bonding/Thickening Machine

20241031

pressure to melt and fuse the pieces of foam together. The EPE foam bonding machine typically consists of a heating element and a set of pressing plates. The foam pieces are placed between the pressi

SMS/SMMS Nonwoven Fabric

20241030

pressure resistance. SMS/SMMS/SSMMS fabrics are also used for core wraps, dusting layers, front and back flaps. We also produce spunbond (SS), SMS and SMMS nonwovens for the medical industry, from di

5000 Series Aluminum Alloy

20241025

pressure vessels, refrigeration devices, television towers, drilling equipment, transportation that require strict fire protection. Transport equipment, missile components, armor, etc. 5086 aluminum

Acetone

20241024

Melting Point -94.0 °C pH value 5 - 6 (395 g/l, H₂O, 20 °C) Vapor pressure 533.3 hPa (39.5 °C) Water absorption 1000 g/kg Please get back to us for prices and more information through the email

Rock Wool Insulation Boards

20241024

pressure and not easily deformed. 4. Good dimensional stability: small dimensional changes when temperature changes. Use: 1. Building exterior wall insulation: Improve the thermal insulation performa

Vanillin

20241018

agents, perchloric acid. Storage Condition Store in a cool, dry place. Store protected from moisture. Store protected from light. Vapor Density 5.3 (vs air) Vapor Pressure >0.01 mm Hg ( 25 °C)

0.1 Micron Porous Stainless Steel Capillary Tube Filter

20241018

Pressure Drop: Due to the small channel size of capillary stainless steel filter tubes, fluid experiences lower resistance within the filter, resulting in reduced pressure drop, which helps lower ene

Facial Liposuction Endolaser Double Wave 980 1470nm Diode Laser Lipolysis Fiber Cannulas Machine

20241018

pressure within capillaries– Increases lymphatic drainage by accelerating sodium/potassium, promoting more interstitial fluid to be absorbed and promoting microcirculation2. What effects does laser

Sodium Metasilicate Pentahydrate

20241015

pressure, followed by crystallization, separation, and drying to obtain the final product [^1018^]。 When it comes to safety, sodium metasilicate pentahydrate is packaged in woven bags lined with po

High-purity Dme Gas Dimethyl Ether Methoxymethane CAS 115-10-6

20241013

Melting point: -141ºCBoiling point: -29.5ºCDensity (liquid) : 0.666g/cm3Density (gas) : 1.97kg/m3Saturated vapor pressure: 533.2kPa (20ºC)Heat of combustion: -1453kJ/molCritical temperature: 127º

PSA Oxygen Generation

20241010

pressure, and flow, at a fraction of the cost of traditional gas delivery. We provide oxygen generators that deliver a quick return on investment, ensuring stable and predictable annual costs. Even c