EC21 Product Catalogs - steel tensile testing

Tensile Testing Machine Usage Steel Bar Striking Point Gauge Meter

20190821

1. Overview DB-DX Type Gauge Length Meter (Striking Point Machine) is the special equipment which is designed and made according to stipulation in national standard GB/T228-2002 . This machine adopts

2.0mm 2.5mm Mill Finished Aluminum Sheet Plate 1100 H14

20260210

Tensile Strength: 90 - 120 MPaYield Strength: ≥ 35 MPaElongation (in 50mm): ≥ 30%Chemical Composition (main elements, wt%): Aluminum (Al): ≥ 99.0% Copper (Cu): 0.05% Iron (Fe): ≤ 0.25% Silico

Reinforcing Steel Deformed Steel Bar for Sale ( 6mm 8mm 10mm 12mm 16mm 20mm).

20250401

Tensile testing(1) Tensile test method: GB/T228.1-2010, JISZ2201, JI SZ2241, ASTMA370, 1497, BS18, etc;(2) Bending test method: often use standard test methods have GB/T232-88, YB/T5126-2003, JISZ224

Turkish Iron Rods Supplier (Reinforcement Steel Rebar Deformed Steel Bar).

20250401

Tensile testing(1) Tensile test method: GB/T228.1-2010, JISZ2201, JI SZ2241, ASTMA370, Г О С Т 1497, BS18, etc;(2) Bending test method: often use standard test methods have GB/T232-88, YB/T5126-2

NABLA Fastening System Rail Insulator,Nabla Insulator,Rail Insulator for Nabla Clip System

20250328

Tensile strength: ≥170Mpa Elongation: ≤4.4% Bending Strength: ≥250Mpa Impact Strength(No gap): ≥80KJ/m2 Melting point:250-270°C Insulation resistance:≥1×108Ω Glass fiber content:30-35% H

Copper Bonded/Clad Steel Wire Coil for Grounding/Earthing Conductor (IEC62561,UL Listed)

20250325

Test result: good) :Adopting high-quality carbon structural steel with high mechanical properties and good ductility. the tensile ratio is 0.8-0.95, the inside and outside copper layer without cracki

Galvanized PC Strand

20250321

tensile coefficient of galvanized steel strand for bridge cable system shall be no more than 20%. The fatigue test of galvanized steel strand in general applications (not for bridge cable system) , s

Rock Wool Board

20250317

steel, stainless steel, and aluminum. 7. Safety and environmental protection Rock wool has been tested to contain no asbestos, CFC, HFC, HCFC and other environmentally harmful substances. It will not

China Manufacturer Railroad Spikes,Rail Cut Track Spikes,Railway Dog Spikes for AREMA

20250316

tensile meets the grade of the AREMA specification. 123,000PCS RAIL CUT TRACK SPIKES TO USA Tensile Strength Yield Point Elongation (in 2" length ) 70,000 psi Min 46,000 psi Min 25% Min Steel Rails

Copper Foil Tape

20250310

Test Government Specifications MIL-T-47012A Imperial Metric Total Tape Thickness 3.5 mils 0.089 mm Tensile Strength 27 lbs/in 48 N/10mm Elongation 6% 6% Adhesion to Steel 51 oz/in 5.6 N/10mm Applicat

SSAW Steel Pipe

20250227

steel structure construction, offshore / onshore construction, piling works, electricity, heating power and etc Test: Chemical component analysis, mechanical properties (ultimate tensile strength, yi

Non-Sparking Pipe Cutter

20250226

tensile strengths up to 1200 MPa This allows our tools to be precisely forged, cast, formed, machined and hardened to strength levels that cannot be achieved in tools made from aluminum, bronze or br

CCGW040102/SCGW09T304/DCGW070202/VBGW110303 Inserts Good Cbn Cutting Tools High Qualify Cbn Inserts

20250108

tensile strength, allowing them to work under high loads and speeds. 2. High thermal stability: CBN tools have good high-temperature stability and high-temperature hardness, and can work under high t

Street Light/Lighting/Lamp Round/Conical Polygonal Octagon Q235/345 Hot/DIP/Galvanized Steel Pole

20250107

tensile strength 490 mpa Max ultimate tensile strength 620 mpa Standard ISO 9001, EN 1090 Length of per section Within 12m once forming without slip joint Welding We has past flaw testing.Internal an

Aramid Rope | Aramid Fiber Rope Kevlar Rope Marine Rope LDAF

20241226

tensile strengthSpecific gravity : 1.44Elongation: 5% at breakMelting point: 450℃Good resistance to UV and chemicalsSuperior abrasion resistanceNo diferencein tensile strength when wet or dryIn-40

GPPS 1540 Plastic Pellets Melt Flow Rate 12

20241218

properties of Value/unit Test standard The tensile strength The yield (yld)4.9 MpaASTM D638The yield (yld)4.9 MpaISO 527-2Tensile elongation The yield (yld)3%ASTM D638The yield (yld)3%ISO 527-2

Galfan Wire

20241213

steel wire strand (galfan wire strand) Supply ACSR CORE WIRE/STRAND Supply 3x7 WIRE ROPE Standards ASTM A855/A 855M-98 SpecificationClass A ,B and any tensile strength grade I am Amy form TIANJIN GAL

Fast Repair Wrap Tape Emergency Pipe Repair Tape

20241212

Tensile strength: … 30-35Mpa ♦ Tensile modulus: … 7.5Gpa ♦ Maximum service temperature: … 150℃ ♦ Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area) App

600ml Foil Sausage Customized Colors High Viscosity Elastic No Crack Fast Drying Ms Flooring Adhesiv

20241206

tensile rate≥200%Shear strength Mpa≥0.6MPaHeat aging peel strength(60ºC)≥0.5MPaTensile strength Mpa≥1.2PaHardness Shore A30~40VOCS≤15g/LCoating propertyEasy to coatPackaging & Shipping Com

Hose Wire

20241202

Steel Wire (Hose wire) is manufactured according to BS, ASTM, EN,ISO or customers' specific standard. The equipments for manufacturing and testing are all introduced from SKET (Germany), CPA (Austri

Steel Cord Conveyor Belt

20241127

steel wires, our belts are engineered to withstand the toughest conditions, ensuring longevity and reliability in your material handling processes. High Tensile Strength: The steel wire ropes embedde

Climbing Carabiner Safety Lock Climbing Equipment Security Safety Lock Outdoor Climbing Accessories

20241119

tensile testing, with a transverse breaking force of 8KN and a longitudinal breaking force of 25KN. 3.Rigorous process, each process is in strict accordance with the process Standard implementation,

Concrete Pole Machine,Concrete Pole,Concrete Pole Production Line

20241113

steel bar should reach 1.5/10000; 3. Tension strength of the reinforcing steel bar should reach 75% of its tensile strength; 4. Demoulding strength of pole should reach 70% of design strength for c

Concrete Pole Machine,Concrete Pole,Concrete Pole Production Line

20241113

steel bar should reach 1.5/10000; 3. Tension strength of the reinforcing steel bar should reach 75% of its tensile strength; 4. Demoulding strength of pole should reach 70% of design strength for c

Suction Hose with Steel Flange

20241028

testing. The following tests are to be conducted: ● Raw material test including natural rubber, tensile textile, rubber additive(inspection before entering warehouse). ● Hose dimension check incl

Block Forging

20241022

testing regimen. This regimen involves a battery of tests, including low-temperature impact tests, high-temperature Tensile testing, metallographic testing, hardness testing, chemical element analysi

Recycled Aluminum

20241008

Tensile Strength : Provides robust performance under stress. Enhanced Elongation : Offers better ductility for forming processes. Excellent Castability : Ensures high-quality surface finishes and dim

Meat Probe 231.5K NTC 304 Food Grade Stainless Steel Needle Braided Cable 2.5mm Phone Plug Connector

20241003

TestTest ItemTest ConditionPerformance RequestLead Wire Tensile PullingApplying force 9.8N（1KGF）along lead wire direction, for 1 minute.No cracks in the resin and wire bonding, No visible damageF

3003 PSMB Aluminum Coil

20240925

test, impact test, salt-spray test, tensile test and packaging testing on exported products , which ensures its integrated performance such as corrosion resistance, coating stickiness etc. and the sa

Ductile Iron Pipe(Self-anchored or Restrained Joint)

20240914

Tensile strength: ≥420MPa b) Yield strength: ≥300Mpa c) Hardness: ≤230HB d) Elongation%: DN80 - 1000 ≥10 DN1200 - 2200 ≥7 14) The coating of pipes can be 15) Process and testing: a) Ind

Graphite Steel Rolls

20240826

test,etc Material: Steel Application: For rolling mill Port: Shanghai or other Casting: Static casting We can design and supply all kinds of roller ,Wear resistance, Damage tolerance, and Fatigue

Reinforcing Bar (Re Bar)

20240822

tensile strength. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the English initials of the three words Hot rolled, Ribbed, a

Seamless Carbon Steel Pipe

20240821

steel tubes Test Chemical Component Analysis, Mechanical Properties (Tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, B

Locomotora Electrica Subterranea De 5 Toneladas Para Mineria De Oro

20240819

TestMining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile t

EN545 DI Pipe

20240807

Tensile Strength:≥420Mpa Yield (≥ MPa):300 MPa Material:Ductile Iron Type:Casting Joint Type:T-type (Push-on) Color:Customer's Requests Surface treatment:Customers' Request OEM:Accept Internal co

ASTM B148 C95800 Trunnion Ball Valve

20240731

Test and inspection: API 598Metal seat: RPTFEEnd connection: RFMode of operation: WormgearCast Steel Trunnion Ball Valves can be made with either a 2-piece body or a 3-piece body, depending on the si

Corruagated Panel, Corrugated Sheet, Bitumen Roof Sheet, Corrugated Roof and Wall Cladding

20240730

tensile Sheet - light weight and high strength. 12° Minimum Pitch - to suit most traditional applications. Anti-capillary Side Laps - 11/2 rib overlaps for weather protection. Spring Curving - ideal

1/40.035 Duplex 2205 Capillary Tubing

20240724

testing and without leakage risk, high tensile strength and yield strength, good spools and packing neatly, longer service life. Recommend Packing: 5000ft/Spool, 10000ft/Spool, 15000ft/Spol, Max 3300

Encapsulated Capillary Tubing

20240718

testing and without leakage risk, high tensile strength and yield strength, good spools and packing neatly, longer service life. -- The corresponding product model 3/8×0.049 316L /Duplex 2205/ Allo

3/8x0.049 Alloy 825 Capillary String Injection (Capillary Tubing)

20240718

tubing is smooth and free of scratches, every spool will be pressure testing and without leakage risk, high tensile strength and yield strength, good spools and packing neatly, longer service life.

Hebei Yida Anti Impact Rebar Coupling System ACJ Standard Coupler

20240628

Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Ge

U71MN QU70 Crane Rail

20240621

Tensile strength Elongation Hardness C Si Mn S P Cr Ni Cu MPa kg/mm² MPa kg/mm² min HB ≤ ≤ ≤ ≤ ≤ ≥880 9% 0.65-0.76 0.15-0.35 1.10-1.40 0.030 0.030 0.25 0.25 0.25 Crane rails for sale su

ASTM A213 T9 Seamless Alloy Steel Tube

20240620

Property: Yield: 205 Mpa(Min) Tensile: 415 Mpa(Min) Elongation: 30%(Min) Each tubes should be checked by NDT, we use Ultrasonic & Eddy Current test at the same time to guarantee the quality.

Wedge Wire Rotating Trommel Screens,Rotary Drum Filter Screen

20240611

tensile strength of the screen that you need. Testing The tensile strength is important for the screens, and each screen will be tested before delivery. Can't find what you 're looking for? Contact u

UHMWPE Dredging Pipe

20240603

Tensile strength at Break (Mpa) ≥ 29 Elongation at Break(%) ≥ 300 Wear Loss (Factory test) < 28% Shore Hardness( R) 65-70 More information: https://www.blog4evers.com https://www.weblogworld.com

Large Size CNC CMM Measuring Machine Fotuna Series XYZ 203015

20240530

steel wire as the load-bearing layer of the toothed belt, which not only improves the flexibility of the belt but also enhances the tensile resistance of the toothed belt. Meanwhile the involute toot

Prestressed Concrete Steel Wire Spiral Ribbed Huayongxin

20240528

Prestressed Concrete Steel Wire Spiral Ribbed Huayongxin PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and wide

Custom Stamping Metal Enclosure for Vaporizer

20240524

testing and improvement of part designs. Deep drawing vs Metal stamping Because the main body custom sheet metal enclosures of vaporized devices are often designed to be easy to grip, lightweight, an

Factory Price Granite Marble Building Materials Stone Honeycomb Panel

20240520

steel. b. Fireproofing Properties Tested by National Research Center of Testing Techniques For Building Materials, the properties of Aluminum Honey comb Composite Panels meet the requirement of non-

Custom Black Hexagon Flange Bolt Wholesale

20240510

Test Equipment Caliper, Tensile test machine, Hardness tester, Salt spraying tester, H.D.G thickness tester, 3D detector, Projector, Magnetic flaw detector and etc Certification ISO 9001:2015, IATF 1