There are 57 vacuum spray dryer from 26 suppliers on EC21.com
Related Searches : dryer , drying equipment , drying , drying oven , drier , rotary dryer , dry cabinet , freezer dryer
Price
Supplier Info.
Report Item
Your report on Product(s), Selling Lead(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Sr.no | Parameter | Pilotech YC-2000 vacuum spray dryer |
1 | Power | 7KW,380V,50/60 Hz |
2 | Evaporating Capacity | 1000~1500ml/h for water |
3 | mini. Input temperature | 50⁰C |
4 | Heater power | 3500W |
5 | Spray gas | 4.2mᶟ/h, 2-5bar |
6 | Nozzle jet | 0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
7 | Nozzle type | Two fluid nozzle |
8 | Possible particle size range | 1-25µm |
9 | Operation mode | Automatic/Manual |
10 | Max. Sample feed | 1500ml/hr |
11 | Minimum sample volume | 30ml |
12 | Spray chamber material | SUS 304 Stainless steel |
13 | Inlet temperature | 50~200⁰C |
14 | Cyclone separator material | SUS-304 Stainless steel |
15 | Body material | SUS-304 Stainless steel |
16 | Seal of cyclone/cylinder | Silicone |
17 | Outlet temperature | 45⁰C |
18 | Dimensions | 1050*1050*1850 |
19 | Weight | 170KG |
20 | Display | 7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency |
21 | Thermal protection | Blower does not stop until temp <90⁰C |
22 | De-block | Automatic |
23 | Atomizer material | SUS 316 Stainless steel |
Inlet air temperature of most spray dryers used in the lab is above 150°C, which should have no problem with ordinary samples. However, if used in materials that are easily affected by temperature, high temperature will lead to denaturation, discoloration, oxidation, and chemical reaction. In this case, our company’s YC-2000 vacuum spray dryer developed especially for such kind of heat-sensitive materials is a good substitute for the common spray dryer.
Pilotech vacuum spray dryer is available in a mini size of 500ML/L, 1500ML/H and pilot scale of 3000ML/H. Our mini vacuum spray dryer with modular design is divided into a general mini spray dryer and a vacuum module, which can be used for drying general materials in high temperature and for drying heat-sensitive materials by connecting to the vacuum module.
A combination of spray drying and vacuum drying is designed ingeniously in the Pilotech YC-2000 vacuum spray dryer based on the principle of boiling point depression. By doing so, the inlet air temperature is decreased from 150°C to 50°C, while the outlet temperature is below 45°C.
Pilotech YC-2000 vacuum spray dryer is applicable in industries such as enzyme preparation, probiotics, heat-sensitive high polymer materials, biological products, and pharmaceuticals, etc.
The frame of YC-2000 vacuum spray dryer is made of SUS304 stainless steel; the spray nozzle is made of SUS316L stainless steel; the drying chamber, the cyclone separator, the collecting bottle, and the collecting tube are made of SUS304 stainless steel, can also be made of SUS316L stainless steel if necessary.
Pilotech YC-2000 vacuum spray dryer is equipped with a PLC and a 7-inch color touch screen. Both PLC and the touch screen are from internationally famous brands. Also, the temperature is controlled accurately with PID temperature control.
Pilotech YC-2000 vacuum spray dryer as a low temperature spray dryer, is suitable for sticky materials. The dried materials do not stick on the wall with a high recovery rate reaching up to 85%.
In order to send you best vacuum spray dryers, we will carry out a series of strict tests including vacuum, noise, and temperature control accuracy test on each drier before shipment. We use heat sensitive materials in the test to ensure that the equipment you bought from us is of high quality, stable operation, safe and reliable.
If you’re looking for lab vacuum scale spray dryer manufacturer, if you’re looking for best price, then you’re in the right place, request a quick quote now.
YC-2000 vacuum spray dryer, with built-in low-noise water ring vacuum pump, which can minimize the inlet air temperature during spray drying.
The minimum inlet air temperature is as low as 50 °C, suitable for heat-sensitive materials such as dry probiotics, so as to well maintain the biological activity of materials. Also, it is suitable for materials such as heat-labile polymer materials.
Registration Date | 2019/08/19(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 2005 |
Employees total | 11 - 50 |
Annual revenue | More than 100,000,000 |
Company | Shanghai Pilotech Instrument & Equipment Co.,Ltd |
---|---|
Address | No.86 Yuxiu Rd. Songjiang DistrictShanghaiShanghai201600China |
Phone | 86 - 021 - 51082915 |
Fax | 86 - 021 - 51069385 |
Homepage | www.shpilotech.cn |
Contact | sabrina zhang |