Sanitary Stainless steel manual Butterfly Valves clamped (pull 3~4 handle
position)
Sanitary butterfly valve is also called as hygienic butterfly valve which is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe , it is your source for a SS304 and SS316L Clamp/Thread/Weld Four Position Butterfly Valve to service the Bakery, Beverage, Cosmetic,Dairy, Food and Pharmaceutical Industries.
As you examine this valve with the pictures provided, look at the following features:
Our butterfly valve is designed with four positions so you can slowly open the valve and create less stress on the valve seat versus the open and close style of valve. Upon opening the valve, you have the option of two other positions for more or less flow depending on your needs. Since the valve comes standard with a clamp end Clamp/Thread end/Weld end , it is easy to assemble and disassemble when cleaning or
working in a tight space.
We have provide a Black or blue Ball attached to the pull handle and interchangeability of the Handle to either side when placed in an area where a wall could be a problem and you can not open and close the valve.
Our Four Position Sanitary Butterfly Valve is 100 percent Hydraulic Pressure Tested and 100 percent inspected, no special tools needed in the field to work on the valve, Silicone seats are standard.Check out the line space of each size of the valve and you will see that it matches with a few of the major competitors.
As for the finish and all wetted surface, the sanitary finish is to a 25 Ra or better. We have each valve capped and bagged so you have no dings on the ends as well as permanently etching the size, alloy and heat number for full trace ability.
| Standard |
SMS,DIN,3A,IDF,ISO |
| Material |
SS304,SS304L,SS316,SS316L |
| Size |
3/4"~4",DN19~DN100 |
| Seal ring of stem |
EPDM. VITON OR SILICON is required |
| Body O-ring |
NBR or EPDM. VITON is required |
| External surface |
Bright gloss,dull gloss |
| Operating Mode |
Manual |
| Working temperature |
-20Celsius degree~+135Celsius degree |
| Max. working pressure |
10Bar |
| Machine Processing |
The most advanced CNC machine from Japan for processing |
| Application |
Milk,Juice,Beer,Beverage,Pharmacy,ect |
| Packing |
Shrink wrapped-carton-pallet or in seaworthy wooden case |
| Shipping mode |
By sea,by air,by express |
| Special Design |
we can produce according to your drawings |
| Sample Policy |
buyer bear the air fee, but this fee will be reduced from order directly |
A.Round pull rod handle:3-4 gear,lock valve inevery 25 degree angle to control flow rate
B.Square pull rod handle:3-4 gear,lock valve every 25degree angle to control flow rate
C.Plastic multiple position gripper handle:12gear,lock valve in every 15 degree angle position,increases flow control accuracy
D.Stainless steel multiple position gripper handle:12 gear,lock valve in every 15 degree angle position,increases flow control accuracy
| SMS-NO.32017 Clamped Butterfly Valve |
| Size |
A |
B |
K*K |
D |
L |
| 19 |
78 |
25.2 |
10*10 |
66 |
136 |
| 25 |
78 |
50.5 |
10*10 |
66 |
136 |
| 32 |
78 |
50.5 |
10*10 |
66 |
136 |
| 38 |
80 |
50.5 |
10*10 |
70 |
136 |
| 51 |
100 |
64 |
10*10 |
76 |
136 |
| 63 |
115 |
77.5 |
10*10 |
80 |
136 |
| 76 |
125 |
91 |
10*10 |
84 |
163 |
| 102 |
154 |
119 |
10*10 |
104 |
163 |
| |
|
|
|
|
|
|
|
| 3A-NO.CD22011 Clamped Butterfly Valve |
| Size |
A |
B |
K*K |
D |
L |
| 3/4" |
78 |
25.2 |
10*10 |
66 |
136 |
| 1" |
78 |
50.5 |
10*10 |
66 |
136 |
| 1 1/4" |
78 |
50.5 |
10*10 |
66 |
136 |
| 1 1/2" |
80 |
50.5 |
10*10 |
70 |
136 |
| 2" |
100 |
64 |
10*10 |
76 |
136 |
| 2 1/2" |
115 |
77.5 |
10*10 |
80 |
136 |
| 3" |
125 |
91 |
10*10 |
84 |
163 |
| 4" |
154 |
119 |
10*10 |
104 |
163 |
1. Are you a trader or manufactor?
We are a manufactor (Forging workshop and CNC machining workshop )
2. Can your products reach to FDA , CE and 3A requirements?Yes, all of our material can reach to the
requirements of FDA,
ISO and 3A Certificate).
3. We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank
Accessories: Sight Glass,
Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS;
Fittings: Ferrule,Elbow, Tee,
Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality
Control System, and we also
have excellent service to support you and promote your business.
4. Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
5. Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
6. About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your
hands. We will choose the
shipping way as you required: By sea, by air or by express. Any question about samples, please contact
us.
7. For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our
mission.
8. Warranty:
Any question or problem will be respond within 12 hours.
Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be
half price in lifetime.
Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then
back to you.
Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified
product.
Purpose:Attitude is everything.
