Parts Clutch

Telescopic Slipring Brushes
               
Telescopic Slipring Brushes: We stock an array of slipring brushes as used to operate electromagnetic slipring clutches. They are available in telescopic types with M14, M16 & M18 threads in varied lengths to suit all clutch manufacturers. We also stock caliper type. A selection of types we keep are EMS, SK4, TSN, TSK, TSL, EMS 2A, EMS 2A/40, EMS 2A/60, EMS 22 mm, Tourco caliper type.
 
               
 
General information:
 
The Telescopic Brushes are required for good transfer of electrical current to the clutch slipring. The above brushes are suitable for ''wet application'' (runs in oil) and can be used in a 24 volt DC supply. They are designed to give good transfer of electrical supply to the clutch slipring despite the presence of an oil film. To ensure satisfactory power supply to the clutch, the special ''wire type brush'' insert should be pressure loaded enabling it to penetrate the oil film and give a good contact. If this is not achieved, burning of the slipring is imminent, resulting in the clutch being rendered non functional.
Brush construction:
 
The telescopic brush is made up of a screw body of the size stated in each type. The brush insert is so designed that its construction has an inner & outer brush, performing a good wiping action & ensuring a good contact. Secondly the outer and inner brush are designed to have different natural frequencies in order to ensure this good contact in the presence of vibration, because only one brush at a time can be in resonance, resulting in a prolonged brush life.
 
 
 
Mechanical Operated Clutch: We can have manufactured single or double acting units with a torque carrying capacity of 20 Nm to 2000 Nm.
 
Mechanical operated clutch and brake multi disc units are traditionally used on radial drills, lathes, auto lathes etc.
 
 
 
Mechanical clutches
               
 
Typical application would be found in Anselmi, Archdale, Asqith, Behringer, Binns & Berry, Breda, Broadbent, Butler Elgamill, Churchill, Cincinnati, CMT, Colchester, Craven, Csepel, Dainichi, Defum, DeVieg, Dorian, Dean Smith & Grace, Clovis, Elliot, Famot, Forges DeGilly, Fritz Werner, Froriep, Gambin, Geminis, Giana, Gidding & Lewis, Gildemeister, Harrison, Heidenriech & Harbeck, Herbert, Hercules, Hermle, Heyligenstaedt, Hitachi Seiki, HMT, Honden, Index, Innocenti, Jarbe, Juaristi, Kearney & Trecker, Kearns, Kearns Richards, Kendall & Gent, Kirloskar, Kitchen & Wade, Kitchen & Walker, Leblond, Lagun, Lang, Macson, Mandelli, MAS, Mauser, Mechanicy, Mecof, Merli Clovis, Metal Export, Misal, Monarch, Morando, Niles, Oerlikon, Pacific, Pama, Parkson, PBR, Pensotti, Percell, Pittler, Raboma, Rafamet, Rambaudi, Ramo, Ravensburg, Reinecker, Richards, Ryzan, Safop, South Bend, Stanko, Stankoimport, Staveley, Sterk, Strojimport, Summit, Swift, Tacci, Tornos, TOS, Tovaglieri, Tuda,  Ursus, Vernier, VDF, VDF Boehringer, Vikram, Ward, Warner & Swasey, Ward, Weiler, Weipert, Wickman etc.
 
Some of these mechanical operated clutch and brake multi disc units are used in agriculture machinery, earth moving equipment and construction equipment.
These mechanical operated clutch and brake disc units are also available in single plate operation. These are used in heavy duty applications, & have a  very high heat dissipation, frequently used in such applications as in the braking or driving of very high masses. All units utilize non-asbestos based surfaces & are available in torque rating from 50 Nm to 2000 Nm on application.
 
Other components we stock or can manufacture for these type of systems are clutch operating fingers, wave spring washers, ''hour glass'' springs, clutch pressure plates, operating collars &  Belleville washers.