Buy Now

Sell Now

My EC21

Search Advanced Search

Suppliers > not > Pego Electronics Yi Chun Company Limited | Matching Products

Your search for "

not

" found 8 companies from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-8 out of 8)

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage: not affect by air humidity, with good repeatability. 2) LCD touch screen, easy to operate and simple to update the software. 3) Built in IEC standard voltage, with auto trigger and user-defined ...

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus: not less than 250kg/m' and other solid combustible material. The horizontal and vertical flame test apparatus is controlled by single chip and push button. The test apparatus is built-in air exhaust, ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts: not less than 0.2Mpa, and install a 4/8 inch faucet. 2).The faucet is not more than 2 meters away from the equipment Requirement for the site 1). The ground is level, the drainage is unobstructed, ...

IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment: not less than 0.2Mpa, and install a 4 /8 inch faucet. 2). The faucet is not more than 2 meters away from the equipment Requirement for the site The ground is level, the drainage is unobstructed, the ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth: not easy to damage. ● Equip with cylinder lifting device, stable lift to decrease the pressure during the operation. ● Equip with safety valve, will auto leak pressure if exceed the rate pressure, ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes: not less than 0.2Mpa, and install a 4/8 inch faucet. 2).The faucet is not more than 2 meters away from the equipment Requirement for the site 1). The ground is level, the drainage is unobstructed, ...

IEC60068-2-75 IEC62262 IK07-10 Vertical Impact Hammer Test Apparatus: IEC60068-2-75 IK07-10 Vertical Impact Hammer Test Apparatus 1. Introduction IK Vertical impact hammer designed according to IEC60068-2-75 test Ehc and IEC62262 (equivalent EN62262) , and can meet ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: not exceeding 2J Impact angle 0~900 Lifting stroke 200-1200mm Impact hammers Striking elements: ≤1J for IK01 to IK06 tests, made by nylon Striking elements: 2J for IK07 test, 5J for IK08 test, 10J ...

Page 1 of 11

Go to Page Go