Buy Now

Sell Now

My EC21

Search Advanced Search

Suppliers > moring > Foshan Raywin New Materials Co., Ltd | Matching Products

Your search for "

moring

" found 8 companies from Foshan Raywin New Materials Co., Ltd, China

Inquire Now

(1-8 out of 8)

COSIMA MK-603 Matting Powder for Leather: better show the color of leather itself and make the color more vivid. 2, Good dispersion, no white spots MK-603 is very easy to disperse, only need to use the general dispersing machine after 15-30 ...

EVA Hot Melt: more than 2 hours, the temperature of the glue box should be lowered to avoid aging of the hot melt adhesive and affecting the bonding effect; If the machine is shut down for more than 8 hours, apply ...

PU FOAM for Aluminum Alloy and Plastic Plate: even apply pressure on the edge glue machine, and apply pressure when the non-stick surface is dry. Welding can be cured by cold or hot pressure, the cold curing time is not less than 3 ~ 4h, and the ...

PUR Hot Melt Adhesive: to use PUR Adhesive PUR hot melt adhesive 3513-W is very strong adhesion to metal, plastic, aluminum, glass, wood, PP, PC, ABS, etc., and the effective time of bonding is long. Technical data Test ...

Spray Adhesive for Matress and Sofa: more accordingly. 4,After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5 -8 minutes/25C and ...

PE Primer for Furniture: paint is used in the wood market, according to the characteristics of PE paint, the company requires that the construction of products and the storage of paint film must meet the following ...

PU White Primer: furniture. It can be used on MDF , PLYWOOD , SOLID WOOD ETC . Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes ...

UV Roller Varnish for Paper: is recommended to be 10~12um, and the coating amount of 10g / ㎡ UV photofixation energy is set to 50~80mj / cm2The transfer speed is set to about 40M / min to ensure sufficient curing, otherwise the ...

Page 1 of 11

Go to Page Go