Buy Now

Sell Now

My EC21

Search Advanced Search

Products > oxygen injection > GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Similar Products

Your search for "

oxygen injection

" found 6 Products from GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd, China

Inquire Now

(1-6 out of 6)

Medical Equipment & Microbial-resistance Cable Jacket TPU: Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 84 85 Proportion ISO 1183 - g/cm³ 1.083 1.185 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 4.6 9.6 Brittle Temperature ISO ...

Medical Equipment Cable Jacket TPEs: Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 55 Proportion ISO 1183 - g/cm³ 0.939 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 0.7 Brittle Temperature ISO 812 - ℃ Mechanical ...

Matte Surface TPU: Injection 24. - 25. - 26. - 27. 28. Physical Characteristics 29. Hardness 30. ISO 48 31. 15S 32. Shore A 33. 83 34. Proportion 35. ISO 1183 36. - 37. g/cm³ 38. 1.079 39. Melt ...

Low Temperature-resistance TPO: Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 97 Proportion ISO 1183 - g/cm³ 0.93 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 1.7 Brittle Temperature ISO 812 - ℃ Mechanical ...

Injection Molding TPU: Injection - - - Mechanical Properties Elongation ISO37:2017 200mm/min % 518 462 Tensile Strength ISO37:2017 200mm/min Mpa 18.5 36.951 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air ...

Injection Molding TPEs: Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM ...

Page 1 of 11

Go to Page Go

Medical Equipment & Microbial-resistance Cable Jacket TPU