Buy Now

Sell Now

My EC21

Search Advanced Search

Products > board using > Shenzhen Bicheng Electronics Technology Co., Ltd | Similar Products

Your search for "

board using

" in Multilayer PCB found 8 Products from Shenzhen Bicheng Electronics Technology Co., Ltd, China

Inquire Now

(1-8 out of 8)

Rogers RO3210 High Frequency PCB: board hybrid designs. 4. Excellent dimensional stability, results in high production yields. 5. Surface smoothness, allows for finer line etching tolerance. PCB Capability PCB Material: ...

Taconic RF-35TC High Frequency PCB Board 20mil 30mil Thickness: board, multilayer board and hybrid board. Thickness ranges from 0.3mm to 1.6mm, maximum size at 400 mm by 500mm; there’re surface finishes of bare copper, hot air level, immersion gold ...

F4B High Frequency PCB with 3.0mm Thick: 2.45, 2.75 and 3.0 Layer count: 1 Layer, 2 Layer, Multilayer, Hybrid type Copper weight: 0.5oz, 1oz, 2oz, 3oz PCB thickness: 0.17mm, 0.25mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm and ...

Rogers RO3006 High Frequency PCB: RO3006 High Frequency PCB Hello everyone, Today we’re talk about RO3006 high frequency PCBs. RO3006 high frequency circuit laminates are ceramic-filled PTFE composites intended for using in ...

F4B High Frequency PCB On 1.6mm Thick with 3oz Copper: 2.45, 2.75 and 3.0 Layer count: 1 Layer, 2 Layer, Multilayer, Hybrid type Copper weight: 0.5oz, 1oz, 2oz, 3oz PCB thickness: 0.17mm, 0.25mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm and ...

Rogers RO3010 High Frequency PCB: Rogers RO3010 High Frequency PCB Hello Everyone, Today we’re talk about RO3010 high frequency PCBs. RO3010 high frequency circuit laminates are ceramic-filled PTFE composites intended for using in ...

Rogers RT/Duroid 6002 High Frequency PCB: Yellow, Red etc. Surface finish: Bare copper, HASL, ENIG, OSP etc.. The base copper of RT/druoid PCB has 0.5oz, 1oz and 2oz; the thickness of PCB board is wide, ranging from 5mil to 120mil to be ...

Hybrid PCB Stack-up Optimizes Signal Integrity and the PCB Cost: us to use this type of high frequency multilayer PCB, i.e. cost, reliability improved and electrical properties enhanced. The cost of high frequency material is much higher than FR-4, sometimes, when ...

Page 1 of 11

Go to Page Go