Search Advanced Search
Products > installation > Global Trade Inc | Similar Products
Your search for "

installation

" in Other Manufacturing & Processing Machinery found 21 Products from Global Trade Inc, Korea

(1-20 out of 21)

Air Shower

Air Shower
AirShower is a device installed at the entrances of clean rooms, semiconductor, electronics, pharmaceutical factories, and hospitals to block the inflow of contaminants (dust, particles, ...

Air Max AirCurtain

Air Max AirCurtain
Air max AirCurtainis installed on both sides of the entrance to strongly blow air in both directions when the door is open, blocking the airflow from the outside and preventing fine dust and harmful ...

Spring Rubber Mount

Spring Rubber Mount
It is an improved, mount version of SRP type spring rubber pad taking advantage of anti- vibration rubber and metal spring. SRM type enables control of the level to reduce horizontal deflection. ...

Spring Rubber Pad

Spring Rubber Pad
product that provides 3-4 times higher vibration isolation efficiency than the conventional rubber pad by using the metal spring's low natural frequency and all of the advantages of anti-vitration ...

Rubber Mount

Rubber Mount
in weigh and easy to install. Provides passive vibration isolation on electronic instruments, measuring equipment and test cells - It is a mount with top and bottom reinforcing plates made of CR ...

Thrust Restraint

Thrust Restraint
- NTR, which consists of steel housing, spring, CR type rubber and space rod, is a vibration control device designed to prevent the generation of reactionary force in the direction opposite to air ...

Spring Hanger (Deflection : 50mm)

Spring Hanger (Deflection : 50mm)
- Though it has the same features and intended purpose as VH62 type, it has a static deflection of 50 mm, which makes it best suitable for pipes and ducts in semiconductor plants. It uses a ...

Spring Hanger (Deflection : 25mm)

Spring Hanger (Deflection : 25mm)
the system's natural frequency to 3~5 Hz and using the CR type guide Rubber attached on the top plate, it prevents the high frequency transferred through pipes and ducts from passing into the ...

Spring Mount

Spring Mount
- As a type of FSL series, it uses SMA2 type (static deflection of 50mm) and prevents damage and distortion of the equipment and pipe. The upper housing (compression plate) has a restrain bolt and ...

Spring Mount

Spring Mount
somewhat reduces attenuation and friction caused by left-right and top- down relative displacement when the equipment is running. There is a CR pad attached on the bottom of the bottom housing to ...

Spring Mount

Spring Mount
- An open-spring mount is, in general, used together with the additional load base. It is easy to install and check; also its static deflection is visible to the naked eye. The spring is in between ...

Water Hammer Arrester

Water Hammer Arrester
It is a semi-permanent water hammer arrestor made up of steel with an EPDM air bag inside to prevent the leakage of air. Plus, it absorbs sudden pressure when the shut-off valve is closed. It is ...

Water Hammer Arrester

Water Hammer Arrester
It is made up of stainless steel having excellent corrosion resistance with a piston and air layer inside to ease the water hammer. The conventional water hammer arrestors need extra space because ...

Water Hammer Arrester

Water Hammer Arrester
It is a semi-permanent water hammer arrestor made up of a stainless steel tube having excellent corrosion resistance with a built-in piston moving up and down to prevent the loss of air. Because it ...

Plywood Floating Floor System

Plywood Floating Floor System
As a kind of form work floor system, it absorbs noise, shock and vibration generated in air conditioning rooms, machine rooms and other special facilities like the jack-up system does. But, unlike ...

Jack Up Mount

Jack Up Mount
The jack-up system absorbs and insulates noise, impulsive vibration, as well as impulsive noise generated in problematic areas, such as air conditioning rooms, machine rooms and bowling alleys. It ...

Polyurethane Mat

Polyurethane Mat
Microcellular Polyurethane Mat is elastic and capable of supporting a wide range of dynamic loads owing to micro-sized air gap inside. In particular, the thickness of the Floating Slab can be reduced ...

Sound Absorbing Duct

Sound Absorbing Duct
It is installed on the outlet or inlet of the air conditioning units and fan, and in a place where soundproofing equipment such as sound arrester and sound chamber are not available because its ...

Acoustic Louver

Acoustic Louver
The acoustic louver is installed in a place having enough area for ventilation where the rectangular sound attenuator is not available, but needs to be soundproofed. The casing is made of a ...

Sound Attenuating Elbow

Sound Attenuating Elbow
The sound attenuating elbow is installed in a right-angled corner to reduce noise and turbulent flow. The elbow interior material is attached only on the sides. Its thickness should be about 10% of ...
Page 1 of 212Next  
Go to Page Go

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2025 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()