EC21, Global B2B Marketplace
Sign In
Join Free
Buy Now
Sell Now
My EC21
Help
Search Advanced Search
Products > engine testing machine > Jingsu Liangyi Co.,Ltd | Similar Products
Your search for "

engine testing machine

" found 12 Products from Jingsu Liangyi Co.,Ltd, China
Inquire Now

(1-12 out of 12)

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator
testing and 100% UT. Rotors are heat-stability tested to SEP 1950 when specified. Long-term service focus around 538–565 °C with strong large-section property consistency. Why engineers specify ...

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts
testing plus 100% UT. Best suited to operating temperatures above 550 °C, near 580 °C, in cross-sections up to ~1,200 mm where through-hardening is achievable. Why engineers specify 1.6946 / ...

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts
engineers specify 39NiCrMo3 / 1.6510 Its high hardenability gives uniform strength, toughness and fatigue resistance through heavy sections, with low distortion and crack risk on oil quenching — the ...

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining
engineers specify AISI 4150 / G41500 It delivers higher strength, hardness and wear resistance than 4140 while keeping deep hardenability and toughness — a workhorse for heavily loaded gears, shafts, ...

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines
Tested per ASTM E8 / E10. Why engineers specify Inconel 783 / R30783 Its low expansion plus oxidation resistance and high-temperature strength make it ideal for gas-turbine clearance-control hardware ...

AISI 9840 (SAE 9840 /AMS 6342) Forging Parts Ni-Cr-Mo Alloy Steel Bars, Rings, Gear Shafts

AISI 9840 (SAE 9840 /AMS 6342) Forging Parts Ni-Cr-Mo Alloy Steel Bars, Rings, Gear Shafts
engineers specify AISI 9840 / G98400 It delivers 4340-class strength, toughness and fatigue resistance at lower alloy cost — a competitive choice for heavy-duty gears, shafts, crankshafts, pinions ...

Nimonic C-263 (Alloy 263 / UNS N07263 / W.Nr. 2.4650) Forging Turbine Discs, Rings, Shafts & Bars

Nimonic C-263 (Alloy 263 / UNS N07263 / W.Nr. 2.4650) Forging Turbine Discs, Rings, Shafts & Bars
Tested per ASTM E8 / E10 / E112. Why engineers specify Nimonic C-263 / 2.4650 Originally developed for combustion-zone hardware, it combines high creep strength with the formability and weldability ...

Waspaloy (UNS N07001 / W.Nr. 2.4654 ) Forged Parts Turbine Discs, Rings, Shafts & Bars

Waspaloy (UNS N07001 / W.Nr. 2.4654 ) Forged Parts Turbine Discs, Rings, Shafts & Bars
Tested per ASTM E8 / E10 / E112. Heat treatment (three-step) Solution treatment (1080 °C/4 h/air cool, or 995–1035 °C/oil quench), stabilisation (845 °C), then precipitation aging (760 °C/16 h/air ...

Nimonic 80A (/ W.Nr. 2.4952Alloy 80A / UNS N07080) Forgings Turbine Blades, Rings, Bars

Nimonic 80A (/ W.Nr. 2.4952Alloy 80A / UNS N07080) Forgings Turbine Blades, Rings, Bars
engine exhaust valves; hubs, sleeves, discs; open-die forgings 30 kg–30,000 kg and custom shapes. Chemistry (typical, wt%) Ni balance · Cr 18.0–21.0 · Ti 1.8–2.7 · Al 1.0–1.8 · Co ≤2.0 · Fe ≤1.5 · Mn ...

ASTM A182 F6NM(1.4313 / UNS S41500/X3CrNiMo13-4 ) Forging Bars, Rolled Rings & Discs| Jiangsu Liangy

ASTM A182 F6NM(1.4313 / UNS S41500/X3CrNiMo13-4 ) Forging Bars, Rolled Rings & Discs| Jiangsu Liangy
machinery parts to EN 10088-3, EN 10250-4, EN 10222-5 and EN 10272, with full material test reports and traceability. About the manufacturer Jiangsu Liangyi Co., Ltd. is a forging specialist in ...

Monel 400 (UNS N04400 / W.Nr. 2.4360 / Alloy 400) Forged Components ASTM B564 Bars,Ring,Shafts

Monel 400 (UNS N04400 / W.Nr. 2.4360 / Alloy 400) Forged Components ASTM B564 Bars,Ring,Shafts
machining and testing in-house. Grade designations (one Ni-Cu grade, several names — all supplied) • Monel 400 — common trade name | UNS N04400 — Unified Numbering System • W.Nr. 2.4360 / NiCu30Fe ...

Inconel X-750 (UNS N07750 / W.Nr. 2.4669 )Forging Bars, Rolled Rings & Discs / AMS 5667 / 5668

Inconel X-750 (UNS N07750 / W.Nr. 2.4669 )Forging Bars, Rolled Rings & Discs / AMS 5667 / 5668
engine and nuclear components, and high-strength springs and fasteners. Frequently asked questions • Is UNS N07750 the same as W.Nr. 2.4669? Yes — Inconel X-750, UNS N07750, W.Nr. 2.4669 ...
Page 1 of 11
Go to Page Go
Share :
Facebook
Twitter
LinkedIn
My Favorites
Email this page

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2026 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()