EC21, Global B2B Marketplace
Sign In
Join Free
Buy Now
Sell Now
My EC21
Help
Search Advanced Search
Products > indicator > Jingsu Liangyi Co.,Ltd | Similar Products
Your search for "

indicator

" found 38 Products from Jingsu Liangyi Co.,Ltd, China
Inquire Now

(1-20 out of 38)

1.7383 (11CrMo9-10) Forging Parts Heat-Resistant Bars, Rings, Valve Bodies, Headers for Power

1.7383 (11CrMo9-10) Forging Parts Heat-Resistant Bars, Rings, Valve Bodies, Headers for Power
it handle? Reliable creep and hydrogen-attack resistance to about 600 °C. • Is it weldable? Yes — with preheat and mandatory post-weld heat treatment using matched 2.25Cr-1Mo fillers. • What ...

1.2714 (55NiCrMoV7 / AISI L6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts

1.2714 (55NiCrMoV7 / AISI L6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts
Typically ~38–48 HRC balanced for toughness; thin sections can go higher. • What is it used for? Forging and hammer dies, hot shear knives, punches, backing plates, die holders, extrusion ...

AISI 4130 (25CrMo4 / 1.7218 / 708A25 / SCM430) Forged Parts Alloy Steel Bars, Rings, Shafts

AISI 4130 (25CrMo4 / 1.7218 / 708A25 / SCM430) Forged Parts Alloy Steel Bars, Rings, Shafts
Is it suitable for oil & gas and nuclear? Yes — manufactured to API 6A / NACE MR0175 for sour service, and used for reactor-coolant-pump and internal parts. • What sizes and forms? Bars to 12 m, ...

1.4923 (X22CrMoV12-1) Forging Material 12% Cr Martensitic Heat-Resisting Steel Bars

1.4923 (X22CrMoV12-1) Forging Material 12% Cr Martensitic Heat-Resisting Steel Bars
tougher and more weldable (rotating shafts). • What conditions are supplied? +QT1 and +QT2 quench-and-temper conditions; full mechanical data per section. • What about welding? Possible with ...

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator
— it is a specialty SEW 555 rotor steel. • How large can rotors be? HP/IP/LP monobloc rotor shafts to ~30 t, 1,800 mm diameter, 15 m length. • What testing is included? Multi-orientation ...

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts
similar turbine-rotor grades). • How large can rotors be? Ingots up to ~50 t; monobloc rotor shafts to large sections (through-hardening best ≤~1,200 mm). • What testing is included? ...

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austenitic Bars, Rings, Tube Sheets

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austenitic Bars, Rings, Tube Sheets
resistance and creep strength for continuous service to about 980 °C. • Is it hardenable? No — it is solution annealed; properties come from composition and solution treatment, not aging. • What ...

1.2713 (55NiCrMoV6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts for Forging Dies

1.2713 (55NiCrMoV6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts for Forging Dies
hardness is achievable? Typically ~38–48 HRC after quench-and-temper, balanced for toughness. • What is it used for? Hot-forging and hammer dies, die-casting dies, extrusion tooling, large mould ...

31CrMo12 (W.Nr. 1.8515) Nitriding Steel Forging Parts EN 10085 Cr-Mo Bars, Rings, Gear & Extruder

31CrMo12 (W.Nr. 1.8515) Nitriding Steel Forging Parts EN 10085 Cr-Mo Bars, Rings, Gear & Extruder
/ 722M24 (not identical). • What surface hardness is achievable? Up to ~800 HV after nitriding, over a tough Q&T core. • Can it be welded? No — 31CrMo12 is not recommended for welded ...

EN26 / 826M40 (1.6745 / 40NiCrMo10-5) Forging Parts High-Tensile Bars, Rings, Crank & Gear Shafts

EN26 / 826M40 (1.6745 / 40NiCrMo10-5) Forging Parts High-Tensile Bars, Rings, Crank & Gear Shafts
850 to over 1,550 MPa by heat-treatment condition (Condition V ≈ 1,000–1,150 MPa). • Can it be surface-hardened? Yes — flame/induction hardening or nitriding (to ~Rc 60) on ...

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings
annealing. • What is the maximum size? 30 kg to 30,000 kg per piece; full custom shapes per drawing. • What documentation is provided? EN 10204-3.1 / 3.2 MTRs with full traceability; third-party ...

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts
Can it be surface-hardened? Yes — it accepts quench-and-temper, case hardening (53–58 HRC) and nitriding (~600 HV1). • What sizes? Bars, shafts and rings in large sections; 30 kg–30,000 kg. • ...

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets
toughness to −196 °C and oxidation resistance to about 1000 °C. • Is it hardenable? No — it is a solution-treated austenitic grade; strength is set by solution treatment, not aging. • What sizes? ...

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining
it compare to 4140? Same family with higher carbon — higher hardness, strength and wear resistance. • What sizes? Bars to Ø1,200 mm, rings to ~5,000 mm OD; 30 kg–30,000 kg. • What testing? ...

21MnCr5 (W.Nr. 1.2162) Forged Parts DIN EN 10084 Case-Hardening Steel Bars, Rings, Die Blocks

21MnCr5 (W.Nr. 1.2162) Forged Parts DIN EN 10084 Case-Hardening Steel Bars, Rings, Die Blocks
is it used for? Cold-forming tooling, plastic moulds, and automotive transmission and steering parts. • What is the delivery condition? Soft annealed (≤230 HB) for machining, or pre-treated per ...

1.5415 (16Mo3 / 15Mo3) Forging Parts EN 10028-2 Molybdenum Pressure-Vessel Steel Bars, Rings, Tube

1.5415 (16Mo3 / 15Mo3) Forging Parts EN 10028-2 Molybdenum Pressure-Vessel Steel Bars, Rings, Tube
to either as required. • What temperature range? Reliable creep strength and service to about 480 °C continuous. • Is it weldable? Yes — very good weldability with appropriate preheat and ...

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater
its resistance is sufficient. • Is it suitable for sour service? Manufactured to NACE MR0175 / ISO 15156 and NORSOK requirements on request. • What is the lead time? Typically 8–12 weeks by ...

ASTM A182 F22 (10CrMo9-10 / W.Nr. 1.7380) Forgings Heat-Resistant Bars, Rings, Valve Bodies, Flange

ASTM A182 F22 (10CrMo9-10 / W.Nr. 1.7380) Forgings Heat-Resistant Bars, Rings, Valve Bodies, Flange
MR0175 / ISO 15156 with controlled hardness. • What is the difference between Class 1 and Class 3? Class 1 is annealed (lower strength); Class 3 is normalised and tempered (higher strength). • ...

2.4606 (Alloy 686 / UNS N06686, NiCr21Mo16W) Forging Parts Bars, Rings, Valve Bodies for Nuclear, F

2.4606 (Alloy 686 / UNS N06686, NiCr21Mo16W) Forging Parts Bars, Rings, Valve Bodies for Nuclear, F
service in Chinese 1000 MW PWR reactor-coolant pumps. • How does it compare to other Ni-Cr-Mo alloys? The high combined Cr+Mo+W gives outstanding resistance to mixed oxidising/reducing acids and to ...

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines
(EN) grade number? No standard EN/Werkstoff number exists; specify Inconel 783 / UNS R30783. • What standards do you work to? ASTM B905, AMS 5839 (and AMS 5940 forging billet); MTRs to EN ...
Page 1 of 212Next  
Go to Page Go
Share :
Facebook
Twitter
LinkedIn
My Favorites
Email this page

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2026 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()