EC21, Global B2B Marketplace
Sign In
Join Free
Buy Now
Sell Now
My EC21
Help
Search Advanced Search
Products > it solution > Jingsu Liangyi Co.,Ltd | Similar Products
Your search for "

it solution

" found 16 Products from Jingsu Liangyi Co.,Ltd, China
Inquire Now

(1-16 out of 16)

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austenitic Bars, Rings, Tube Sheets

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austen<strong>it</strong>ic Bars, Rings, Tube Sheets
solution-annealed austenitic heat-resistant grade (not age-hardened): typical tensile ≥500 MPa, yield ≥170 MPa, elongation ≥30%, with strong creep-rupture strength and oxidation resistance to ~980 ...

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings
solution alloy — not age-hardenable; higher strength is developed by cold work. Heat treatment Solution annealing (typically ~1040 °C) for optimum corrosion resistance; hot forging 1040–1230 °C; the ...

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets
solution treated for optimum corrosion resistance and a stable austenitic structure. The aluminium-titanium stabilisation controls carbide precipitation at grain boundaries; the alloy offers good ...

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater
solution annealed) Tensile ≥655 MPa (95 ksi) · yield (0.2%) ≥310 MPa (45 ksi) · elongation ≥30% · PREN ≈ 47 — well above 316L (~24) and a cost-effective alternative to nickel-base alloys. Heat ...

2.4606 (Alloy 686 / UNS N06686, NiCr21Mo16W) Forging Parts Bars, Rings, Valve Bodies for Nuclear, F

2.4606 (Alloy 686 / UNS N06686, NiCr21Mo16W) Forging Parts Bars, Rings, Valve Bodies for Nuclear, F
solution annealing at 1080–1150 °C with rapid quench to dissolve secondary phases and maximise corrosion resistance. Why engineers specify 2.4606 / NiCr21Mo16W Its high Cr + Mo (+W) gives superior ...

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines

Inconel 783 (Alloy 783 / UNS R30783) Forged Parts AMS 5839 Rings, Flat Bars for Gas Turbines
it keeps the coefficient of thermal expansion low.) Properties & heat treatment Oxidation resistance and strength to ~704 °C with a CTE ~20% below Inconel 718; aluminium forms a protective oxide. ...

Incoloy 925 (Alloy 925 / UNS N09925) Forging Bars, Rings, Wellhead & Valve Parts for Sour Oil & Gas

Incoloy 925 (Alloy 925 / UNS N09925) Forging Bars, Rings, Wellhead & Valve Parts for Sour Oil & Gas
Solution-annealed and age-hardened for high strength with sour-service corrosion resistance: typical minimum yield ~725 MPa and minimum tensile ~1,000 MPa, with maximum continuous service around 400 ...

Incoloy 926 (Alloy 926 / UNS N08926 / W.Nr. 1.452) Forging Bars, Rings, Valve Bodies

Incoloy 926 (Alloy 926 / UNS N08926 / W.Nr. 1.452) Forging Bars, Rings, Valve Bodies
solution annealing, not age hardening. Why engineers specify Incoloy 926 / 1.4529 Its 6% molybdenum plus nitrogen deliver pitting, crevice and chloride SCC resistance for seawater, brackish water, ...

Nimonic C-263 (Alloy 263 / UNS N07263 / W.Nr. 2.4650) Forging Turbine Discs, Rings, Shafts & Bars

Nimonic C-263 (Alloy 263 / UNS N07263 / W.Nr. 2.4650) Forging Turbine Discs, Rings, Shafts & Bars
solution treatment at 1150 °C (water quench) to dissolve secondary phases and produce a uniform grain structure, followed by aging at 800 °C/8 h/air cool. Tested per ASTM E8 / E10 / E112. Why ...

Waspaloy (UNS N07001 / W.Nr. 2.4654 ) Forged Parts Turbine Discs, Rings, Shafts & Bars

Waspaloy (UNS N07001 / W.Nr. 2.4654 ) Forged Parts Turbine Discs, Rings, Shafts & Bars
Solution treatment (1080 °C/4 h/air cool, or 995–1035 °C/oil quench), stabilisation (845 °C), then precipitation aging (760 °C/16 h/air cool) to develop γ′-strengthened high-temperature ...

Incoloy 825 (UNS N08825 / W.Nr. 2.4858 / Alloy 825) Forging Parts,Forged Bars, Seamless Rolled Rings

Incoloy 825 (UNS N08825 / W.Nr. 2.4858 / Alloy 825) Forging Parts,Forged Bars, Seamless Rolled Rings
solution annealing 940–980 °C with water quench / rapid air cool; high-temperature solution 1010–1175 °C for maximum ductility; stress relief 590–650 °C. Why engineers specify Incoloy 825 / 2.4858 It ...

Nimonic 80A (/ W.Nr. 2.4952Alloy 80A / UNS N07080) Forgings Turbine Blades, Rings, Bars

Nimonic 80A (/ W.Nr. 2.4952Alloy 80A / UNS N07080) Forgings Turbine Blades, Rings, Bars
solution treatment ~1080 °C (air cool), followed by precipitation aging in the 700–850 °C range to develop full properties; tested per ASTM E8 / E10 / E112. Why engineers specify Nimonic 80A / ...

Monel 400 (UNS N04400 / W.Nr. 2.4360 / Alloy 400) Forged Components ASTM B564 Bars,Ring,Shafts

Monel 400 (UNS N04400 / W.Nr. 2.4360 / Alloy 400) Forged Components ASTM B564 Bars,Ring,Shafts
Monel 400 — designated UNS N04400, W.Nr. 2.4360 (NiCu30Fe) and Alloy 400 — is a nickel-copper solid-solution alloy (63–70% Ni, 28–34% Cu) with outstanding resistance to seawater (corrosion rate < ...

Inconel X-750 (UNS N07750 / W.Nr. 2.4669 )Forging Bars, Rolled Rings & Discs / AMS 5667 / 5668

Inconel X-750 (UNS N07750 / W.Nr. 2.4669 )Forging Bars, Rolled Rings & Discs / AMS 5667 / 5668
Solution treatment at 982 °C followed by stabilisation and double precipitation hardening; Type 1 (1149 °C solution + 843 °C stabilise + 704 °C age) for service above 593 °C, Type 2 (982 °C solution ...

Incoloy 945 (UNS N09945 / Alloy 945) Forged Parts ASTM B637 Sour-Service Bars, Rings, Flanges

Incoloy 945 (UNS N09945 / Alloy 945) Forged Parts ASTM B637 Sour-Service Bars, Rings, Flanges
solution treated + double aged, per ASTM B637) Tensile ≥1035 MPa (typ 1170) · yield (0.2%) ≥895 MPa (typ 1030) · elongation ≥25% (typ 30) · reduction of area ≥35% · hardness 30–36 HRC. Max ...

17-4PH Stainless Steel Forgings UNS S17400 / AISI 630 / EN 1.4542 Bars, Seamless Rolled Rings

17-4PH Stainless Steel Forgings UNS S17400 / AISI 630 / EN 1.4542 Bars, Seamless Rolled Rings
it is ferromagnetic in the solution-annealed and all aged conditions due to its martensitic structure, unlike austenitic 316L. • When is VAR needed instead of ESR? ESR suits about 90% of oil & gas, ...
Page 1 of 11
Go to Page Go
Share :
Facebook
Twitter
LinkedIn
My Favorites
Email this page

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2026 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()