Buy Now

Sell Now

My EC21

Search Advanced Search

Products > 1 device > Pego Electronics Yi Chun Company Limited | Similar Products

Your search for "

1 device

" found 8 Products from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-8 out of 8)

IEC60598-1 Impact Test Device with 50mm Steel Ball: IEC60598-1 Impact Test Device with 50mm Steel Ball 1. Introduction The impact test device with a steel ball is designed according to IEC60598-1 and IEC60950-1 clause 4.2.5. It is applied to do the ...

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber: 1-1986 and etc. This equipment is mainly used in IP5X and IP6X testing about the leakproofness of the enclosure. Features: 1. Applied for IP5X and IP6X Test 2. Adopts LCD color display and touch ...

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage: 1.2μs ±30％ Time to half-value 50μs ±20％ Output current (short) 7.5kA±5％ (max) (LSG-1520), Front time 8μs ±20％ Time to half-value 20μs ±20％ Output polarity Positive, negative, positive/negative ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation: device. 2. Parameter Control system single chips and push buttons Burner Inner diameter: Φ 0.5mm ± 0.1mm Outer diameter: ≤Φ 0.9mm Length: 35mm, Material: stainless steel Burner angle 450 or ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts: 16750-4 clause 5.4.2. It can be used for splash water or high temperature test alone, to simulate ice water splashing over a hot system or components when driving on wet roads in the winter. Failure ...

IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment: 14.2.5 and 14.2.6. The jet nozzles also be called as hose nozzles. Waterproof test simulates the condition of water jets and powerful water jets, which is mainly applied to electronic products, ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth: device, stable lift to decrease the pressure during the operation. ● Equip with safety valve, will auto leak pressure if exceed the rate pressure, to prevent inappropriate operation. ● Test time ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: 1998, following its adoption as an international standard (IEC 62262) in 2002, the European standard was renumbered EN 62262. The IK code is from 00 to 10, and corresponding impact energy is from ...

Page 1 of 11

Go to Page Go