Search Advanced Search
Products > Power Controller > Pego Electronics Yi Chun Company Limited | Similar Products
Your search for "

Power Controller

" found 13 Products from Pego Electronics Yi Chun Company Limited, China

(1-13 out of 13)

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage
resistor: 330Ω ±10%(replaceable) Waveform of contact discharge Meet the standards of EN/IEC 61000-4-2,GB/T 17626.2 Rising time: 0.8ns ±25% First peak current 7.5A ±15% @ 2kV 15A ±15% @ 4kV 22.5A ±15% ...

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber
Controller. 6. Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 7. Safety device: leakage protection, overheat protection Working ...

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage
polarity Positive, negative, positive/negative automatically Output impedance 2Ω±10%, 500 Ω±10% Trigger mode Synchronization, asynchronization Inject phase Freely set at ...

IEC61180-1 1.2/50us Impulse Voltage Generator

IEC61180-1 1.2/50us Impulse Voltage Generator
voltage and output impedance can be customized, and Interface is provided to connect to an external oscilloscope to monitor waveform. 2. SpecificationModelLSG-255Control and display modeLCD+touch ...

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus
controlled by single chip and push button. The test apparatus is built-in air exhaust, the exhaust system can be preset to delay 1-3mins after power off . T he front panel is made by military-grade ...

IEC60112 PTI and CTI Tracking Index Test Apparatus

IEC60112 PTI and CTI Tracking Index Test Apparatus
0.1%NH4Cl, 3.95±0.05Ωm, solution B: 1.98±0.05Ωm Number of drops 0~9999 (presettable, record and display) Test wind speed 0.2m/s Short circuit current drop 1.0A±0.1A drop 10% Leakage ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation
masking Safe operation interface automatically power off upon open the glass window Test space ≥ 0.5m3 , matte black background, illuminance ≤ 20Lux , exhaust hole : Φ70mm (Power on automatic ...

IEC60335-2-23 Supply Cord Flexing Test Apparatus

IEC60335-2-23 Supply Cord Flexing Test Apparatus
IEC60335-2-23 Supply Cord Flexing Test Apparatus 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts
power lines or signal lines; ● Control components: 7 inch touch screen+ PLC. The electrical components are made by LS, Omron, etc. The wiring process meets the requirements of Chinese national ...

IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment

IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment
control the water level with the help of Water floating ball valve , and alarm at high or low level to protect from the damage caused by low water level. ● Adopts speed motor, the speed in the ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth
control mode auto adjustment Pressure sensor error ±0.002 Mpa Pressure sensor accuracy 0.001Mpa Water depth range 0~50m Pressure adjustment range 0.00~0.5Mpa Safety valve discharge ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes
control the directions (fit for the samples to do live test). ● The sample power socket (AC220, 10A) is installed on the wall, and the power on and off time of the sample power can be controlled by ...

IEC60598-1 Impact Test Device with 50mm Steel Ball

IEC60598-1 Impact Test Device with 50mm Steel Ball
as pendulum in order to apply a horizontal impact, dropping through a vertical distance of 1.3m onto the sample, alternatively, the sample is rotated 90 degrees about each of its horizontal axes and ...
Page 1 of 11
Go to Page Go

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2026 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()