Search Advanced Search
Products > equipped with control > Pego Electronics Yi Chun Company Limited | Similar Products
Your search for "

equipped with control

" in Testing Equipment found 10 Products from Pego Electronics Yi Chun Company Limited, China

(1-10 out of 10)

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage
IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage Introduction: ESD simulator (ESD gun) is completely meet the requirements of IEC61000-4-2 and GB/T17626.2. The ESD generator is ...

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber
equipment adopts high quality steel, sprayed with stoving varnish. 4. Sand and dust: Dry powder, portland cement paste and etc. 5. Control system: adopt Programmable Time Controller. 6. Transparent ...

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage
IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage 1. Introduction The LSG-1520 Surge Generator is a auto equipment designed according to IEC61000-4-5 and GB/T17626.5,and completely meet ...

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus
equipment, low-voltage apparatus, household appliance, motor and etc.. And also can be used in the industries of insulation material, plastic , non-metalic material, foam with a density of not less ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation
equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire resistance by ...

IEC60335-2-23 Supply Cord Flexing Test Apparatus

IEC60335-2-23 Supply Cord Flexing Test Apparatus
IEC60335-2-23 Supply Cord Flexing Test Apparatus 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts
control engineering of various electronic, electrical, plastic and other raw materials and devices. 2. Features: ● For ice water splash resistance test ● The inner wall of the equipment are made by ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth
with feature of good elasticity, and not easy to damage. ● Equip with cylinder lifting device, stable lift to decrease the pressure during the operation. ● Equip with safety valve, will auto leak ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes
equipment and turntable are made by SUS304# stainless steel, to ensure rustless. ● The water supply pipeline is equipped with a filter, which can filter the impurities in the water and prevent the ...

IEC60598-1 Impact Test Device with 50mm Steel Ball

IEC60598-1 Impact Test Device with 50mm Steel Ball
with 50mm diameter and 500g±25g mass is permitted to fall freely from rest through a vertical distance of 1.3m onto the sample. I n addition, the steel ball is suspended by a cord and swung as ...
Page 1 of 11
Go to Page Go

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2025 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()