Buy Now

Sell Now

My EC21

Search Advanced Search

Products > height > Pego Electronics Yi Chun Company Limited | Similar Products

Your search for "

height

" in Testing Equipment found 7 Products from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-7 out of 7)

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus: UL94 Horizontal and Vertical Flame Test Apparatus (HVR-4) 1. Introduction Horizontal and vertical flame test apparatus is applied to simulate the fire at the early stage surround the electric and ...

IEC60112 PTI and CTI Tracking Index Test Apparatus: IEC60112 PTI and CTI Tracking Index Test Apparatus 1. Introduction The tracking index test apparatus is designed according to IEC60112, UL746A, GB.T4207, GB4706.1 and TMD 3628-92. On the surface of ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation: height 12mm ± 1mm (adjustable), Measuring with a steel ruler Burn gas ≧95% butane gas or propane gas Flame requirement rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s Thermocouple Φ0.5mm K ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes: height of turntable 550-1000mm Rotation speed of turntable 1~5r/min Tilt angle of turntable 00 or 150 in horizontal direction Turntable rotation method Forward or forward and reverse alternation Test ...

IEC60598-1 Impact Test Device with 50mm Steel Ball: as pendulum in order to apply a horizontal impact, dropping through a vertical distance of 1.3m onto the sample, alternatively, the sample is rotated 90 degrees about each of its horizontal axes and ...

IEC60068-2-75 IEC62262 IK07-10 Vertical Impact Hammer Test Apparatus: IEC60068-2-75 IK07-10 Vertical Impact Hammer Test Apparatus 1. Introduction IK Vertical impact hammer designed according to IEC60068-2-75 test Ehc and IEC62262 (equivalent EN62262) , and can meet ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: height are adjustable. For low energy tests (≤1J, IK01 to IK06), there will be a mounting fixture to fix the specimens as per IEC60068-2-75 clause 4.2.2, the mounting fixture is designed according ...

Page 1 of 11

Go to Page Go

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus