Buy Now

Sell Now

My EC21

Search Advanced Search

Products > manual > Pego Electronics Yi Chun Company Limited | Similar Products

Your search for "

manual

" in Testing Equipment found 7 Products from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-7 out of 7)

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage: polarity Positive, negative, positive/negative automatically Output impedance 2Ω±10％, 500 Ω±10％ Trigger mode Synchronization, asynchronization Inject phase Freely set at ...

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus: manual adjustment) Flame height 20mm ± 2mm to 175mm±1mm (adjustable) , record by height gauge Flame time 0-999.9s±0.1s (adjustable) After flame time 0-999.9s±0.1s (auto record, manual pause) After ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation: manual pause) Flame height 12mm ± 1mm (adjustable), Measuring with a steel ruler Burn gas ≧95% butane gas or propane gas Flame requirement rising time from 100℃±2℃ to 700℃±3℃ should within ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth: Mpa Pressure sensor accuracy 0.001Mpa Water depth range 0~50m Pressure adjustment range 0.00~0.5Mpa Safety valve discharge pressure 0.55Mpa Max pressure 0.6Mpa Test time 0~999min Protection ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes: Manual control Material of tube SUS304 stainless steel Electrical parameters Protection Electric leakage, hydropenia, short circuit Working power AC 220V/50Hz, 1KW (single phase, Live wire + ...

IEC60068-2-75 IEC62262 IK07-10 Vertical Impact Hammer Test Apparatus: manual adjustable) Impact hammers 0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK07 to IK10 vertical impact Impact energy 2J, 5J, 10J, 20J Size of guideway (diameter*height) Φ40mm*471mm, Φ68mm*385mm, ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: Manual release Mounting Fixtures 1). Completed designed according to IEC60068-2-75 figure D.3, applied for IK01 to IK06 tests 2). Flat mounting plate for IK07 to IK10 tests, adjustable angle 0-90°, ...

Page 1 of 11

Go to Page Go

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage