Buy Now

Sell Now

My EC21

Search Advanced Search

Products > positioning > Pego Electronics Yi Chun Company Limited | Similar Products

Your search for "

positioning

" in Testing Equipment found 8 Products from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-8 out of 8)

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage: Positive, negative, positive/negative auto Trigger mode Single,counting,20pps,other Discharge interval: 0.05~99.99s Numbers of discharge: 1~9999 Energy storage capacitance: 150pF ...

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage: polarity Positive, negative, positive/negative automatically Output impedance 2Ω±10％, 500 Ω±10％ Trigger mode Synchronization, asynchronization Inject phase Freely set at ...

IEC61180-1 1.2/50us Impulse Voltage Generator: voltage and output impedance can be customized, and Interface is provided to connect to an external oscilloscope to monitor waveform. 2. SpecificationModelLSG-255Control and display modeLCD+touch ...

IEC60335-2-23 Supply Cord Flexing Test Apparatus: IEC60335-2-23 Supply Cord Flexing Test Apparatus 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts: position, and finally fix the casters; ● Ice water splash test: the nozzle is fixed on the right side of the test chamber; the spray distance is adjusted by moving the sample 2. Specification Outer ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes: position, test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt), water equivalent to 3 mm/minute. 2. Features: ● For IPX1, IPX2, IPX3, IPX4 testing ● The inner wall of the equipment ...

IEC60598-1 Impact Test Device with 50mm Steel Ball: IEC60598-1 Impact Test Device with 50mm Steel Ball 1. Introduction The impact test device with a steel ball is designed according to IEC60598-1 and IEC60950-1 clause 4.2.5. It is applied to do the ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: position the impact device, then release the hammer to freely impact the hammer. T he impact angle and impact height are adjustable. For low energy tests (≤1J, IK01 to IK06), there will be a ...

Page 1 of 11

Go to Page Go