Buy Now

Sell Now

My EC21

Search Advanced Search

Products > sample test > Pego Electronics Yi Chun Company Limited | Similar Products

Your search for "

sample test

" in Testing Equipment found 8 Products from Pego Electronics Yi Chun Company Limited, China

Inquire Now

(1-8 out of 8)

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus: (outer) 3). Thermocouple: Φ0.5mm K type thermocouple (The insulating sleeve heat resist to 1250 ℃), 2 pieces to detect the temperature 4). Temperature measuring copper blocks Test ...

IEC60335-2-23 Supply Cord Flexing Test Apparatus: test is supplied at rated voltage, and rotated about its major axis at a rated of approximately 50 rev/min, the direction of rotation being reversed every 20 revolutions, the test is carried out for ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts: test. The signal of the digital flowmeter is fed back to the PLC, and the automatic constant flow is controlled by PID, and the flow rate is directly displayed on the touch screen. ● High-quality ...

IEC60529 IPX8 High Pressure Water Tank with 50M Water Depth: testing ● The tank body is made by SUS304 stainless steel. ● Adopts Silicone seals, with feature of good elasticity, and not easy to damage. ● Equip with cylinder lifting device, stable lift to ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes: test is completed, the excess water in the drip box can be drained out to avoid long-term accumulation of water and scaling and clogging of pinholes ( air compressor is prepared by user). ● ...

IEC60598-1 Impact Test Device with 50mm Steel Ball: IEC60598-1 Impact Test Device with 50mm Steel Ball 1. Introduction The impact test device with a steel ball is designed according to IEC60598-1 and IEC60950-1 clause 4.2.5. It is applied to do the ...

IEC60068-2-75 IEC62262 IK07-10 Vertical Impact Hammer Test Apparatus: IEC60068-2-75 IK07-10 Vertical Impact Hammer Test Apparatus 1. Introduction IK Vertical impact hammer designed according to IEC60068-2-75 test Ehc and IEC62262 (equivalent EN62262) , and can meet ...

IEC 60068-2-75 IEC 62196 Electric Vehicle IK01-IK10 Pendulum Impact Hammer Testing Apparatus: tests, the swing pipe can be adjusted back and forward, left and right, and the angle also can be adjusted. The hammer for 1J and below tests is made of nylon, and the hammers for IK07 to IK10 tests ...

Page 1 of 11

Go to Page Go

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus