Search Advanced Search
Products > temperature control > Pego Electronics Yi Chun Company Limited | Similar Products
Your search for "

temperature control

" in Testing Equipment found 9 Products from Pego Electronics Yi Chun Company Limited, China

(1-9 out of 9)

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage
resistor: 330Ω ±10%(replaceable) Waveform of contact discharge Meet the standards of EN/IEC 61000-4-2,GB/T 17626.2 Rising time: 0.8ns ±25% First peak current 7.5A ±15% @ 2kV 15A ±15% @ 4kV 22.5A ±15% ...

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber
Controller. 6. Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 7. Safety device: leakage protection, overheat protection Working ...

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage
polarity Positive, negative, positive/negative automatically Output impedance 2Ω±10%, 500 Ω±10% Trigger mode Synchronization, asynchronization Inject phase Freely set at ...

IEC61180-1 1.2/50us Impulse Voltage Generator

IEC61180-1 1.2/50us Impulse Voltage Generator
voltage and output impedance can be customized, and Interface is provided to connect to an external oscilloscope to monitor waveform. 2. SpecificationModelLSG-255Control and display modeLCD+touch ...

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus
temperature required: heat up from 1000C±50C to 7000C±30C within the time of 44s±2s (50W) and 54s±2s (500W) 2). Flame height: 50W: 20±2mm (50W) 500W: 40±2mm (inner), 125±10mm (outer) 3). ...

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation

IEC60695-11-5 Flammability Tester Needle Flame Tester with Button Operation
Temperature sensor Copper with Φ4mm and 0.58±0.1g weight, equip with K type thermocouple Thermal radiation baffle Automatic masking Safe operation interface automatically power off upon open the ...

IEC60335-2-23 Supply Cord Flexing Test Apparatus

IEC60335-2-23 Supply Cord Flexing Test Apparatus
IEC60335-2-23 Supply Cord Flexing Test Apparatus 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test ...

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts

ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts
ISO16750-4 Clause 5.4.2 Ice Water Splash Test Chamber for Automotive Parts 1. Introduction The splash water test chamber meets the requirement of ISO16750-4 clause 5.4.2. It can be used for splash ...

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes

IEC60529 IPX1-4 Comprehensive Waterproof Test Chamber Integrated with Drip Box and Oscillating Tubes
control method Manual control Material of tube SUS304 stainless steel Electrical parameters Protection Electric leakage, hydropenia, short circuit Working power AC 220V/50Hz, 1KW (single phase, ...
Page 1 of 11
Go to Page Go

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2025 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()