Buy Now

Sell Now

My EC21

Search Advanced Search

Products > clean machine > Shenzhen Richconn Technology Co.,Ltd | Similar Products

Your search for "

clean machine

" found 5 Products from Shenzhen Richconn Technology Co.,Ltd, China

Inquire Now

(1-5 out of 5)

CNC Machining Services From Richconn: machining, run to check whether the clutch and brake are normal. Let the machine idle for 1 to 3 minutes. It is strictly forbidden to use in case of machine failure. Turn off the power switch for ...

Blackening Coating: cleaning: rinse with flowing clean water. Pickling: wash with hydrochloric acid solution at room temperature for no more than 30 seconds. Blackening (put the blackening liquid in a stainless-steel ...

Anodizing: clean the surface. 3-5 round trips. 5. Chemical polishing: immerse the parts in the polishing pool for 1-5 minutes. 6. Remove the impurity film on the surface, and remove the gray film on the surface ...

Pvd Coating: machined parts Preventing the processed parts from adhering to the tool-mold surface No change in dimensions due to PVD coating thickness at micron level Decrease in tool cost per piece due to ...

Electrophoresis Coating: clean the surface, rinse, dip in a wetting agent, submerge in e-coating solution and finally cure the coating. How Thick Is Electrophoretic Painting? Our electrophoretic painting finish, normally is ...

Page 1 of 11

Go to Page Go

CNC Machining Services From Richconn