Buy Now

Sell Now

My EC21

Search Advanced Search

Products > cleaning notes > TecMig Welding Jiangsu Co.,Ltd | Similar Products

Your search for "

cleaning notes

" found 6 Products from TecMig Welding Jiangsu Co.,Ltd, China

Inquire Now

(1-6 out of 6)

TecMig Aluminum Alloy Mig Wires Tig Rods ER4043 ER5356 ER5183: Note: 1.Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding. 2. Shield Gas:100%Ar or 75%Ar+25%He or 50%Ar+50%He 3. In order to get good welding bead, weld on ...

TecMig Gasless Gas Shield Flux Cored Wires E71T-GS E71T-11 E71T-1C: Note: 1.Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding. 2. Stock in dry environment, please use up in short time once opened. TecMig E71T-11 AWS A5.20 ...

TecMig Low Alloy High Tensile Mig Welding Wires ER80S-D2 ER100S-G ER110S-G: Note: 1. Rusty, water, oil and other impurity should be cleaned before welding. 2. Shield gas: 80%Ar+20% CO2. 3. Gas speed: 15-25L/Min 4. Tig rods ER80S-D2 1.6mm, 2.0mm, 2.4mm, 3.2mm available ...

TecMig Mild Steel Mig Welding Wires ER70S-6 SG2 G3Si1 G4Si1 ER70S-2: Note: 1. Rusty, water, oil and other impurity should be cleaned before welding. 2. Shield gas: 100%CO2 or 80%Ar+20% CO2; Gas speed: 15-25L/Min 3. Tig rods ER70S-6 1.6mm, 2.0mm, 2.4mm, 3.2mm ...

TecMig Super Low Temperature Low Hydrogen Electrodes E7018-1: 2.5mm, 3.2mm, 4.0mm, 5.0mm. Typical Mechanical Properties: Tensile strength(MPa): 572 Yield strength(MPa): 480 Elongation (%): 28 Impact values(≥47J/-45℃): 110 Typical Chemical Compositon : ...

TecMig Low Hydrogen Iron Powder Welding Electrodes E7018: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm. Typical Mechanical Properties: Tensile strength(MPa): 550 Yield strength(MPa): 440 Elongation (%): 28 Impact values(≥47J/-30℃): 150 Typical Chemical Compositon ...

Page 1 of 11

Go to Page Go

TecMig Aluminum Alloy Mig Wires Tig Rods ER4043 ER5356 ER5183