Archive Results for 110ppm : 6 Buying Leads (BEFORE January 1st, 2015).
- 27 Aug, 2012
- COMPONENTS RESULTS
Ash content, not more %0,14
Mass fraction of suplhur, not more %
low suplhur residual oil
0,5
Temperature of the flash, not less
In the closed crucible
In the open crucible
110 min
The temperature of solidification, not higher
25
Kinematics viscosity 118 max
Water content 0.5%
-
Categories : Energy, Other Petrochemical Related Products
China
- Contact Now
- 23 Nov, 2011
- Hi,
I am looking for HP laser Jet B/w printer with following features
40 to 45 PPM
150000 to 200000 Duty Cycle
Duplex printing
Tray capacity 1000 pages or more
220 volts not 110 volts
Qty 100 - 200 units
Also if you have HP 3010dn or HP 3015dn you can also quote.
All printers must be tested and wor
-
Categories : Computer Hardware & Software, Printers
Pakistan
- Contact Now
- 25 Dec, 2010
- 110 min
4.The temperature of solidification, not higher C 25
5.Kinematics viscosity at 50 C 118 max
6.Water content0.50%
7.Mechanical impurities Lower than 0.1%
8.Acidity Lower than 5 mg KOH/100ml
9.Alkalinity Nil
10.Gross Calorific Value Kcal/kg/KJ/kg Min9200/41300
11.Density at 15.0 deg. C Kg/l0.
-
Categories : Energy, Other Petrochemical Related Products
United States
- Contact Now
- 4 May, 2010
- Dear
Kindly send quotation for 100 KG Selenium with your best discounted CIF price By Air to Dubai, United Arab Emirates.
Please find specs as follows:
Selenium Powder
Se 99.5% Min.
H2O 0.5% Max.
Cu 0.16 to 0.20%
Ni < 10 ppm
Co <10 ppm
As 65 to 100 ppm
Pb 110 to 120 ppm
Fineness 100% pass on 200 BS
-
Categories : Chemicals, Other Inorganic Salts
United Arab Emirates
- Contact Now
- 15 Dec, 2008
- 110-143
4- SAPONFICATION VALUE..(MGKOH/GM OIL)....188-194
5- UNSAPONIFIBLE MATTER.....1.5 (MAX)
6- PEROXIDE VALUE........MAX.10 (M EQUIVALENT/KG OIL)
7- ACIDITY{ (MGKOH) GM OIL CRUDE OIL4 0.6 UNCRUD OIL
8- COLOURING MATERIAL-ALLOWED TO ADD
-BETA CAROTENE ACCORDING TO GOOD MANUFACTURING PRODUCT
-ANA
-
Categories : Agriculture, Sunflower Oil
Jordan
- Contact Now
- 1 Feb, 2002
- Dear Sir,
We require Toluene of purity 99.95%, Boiling Point: 110 degree
C, Water content less than 200 ppm (m/m), Peroxide No. Max. 5,
Toluene 50% + Normal Heptance 50% should give research octance
no. of 65 +/- 0.5. for Institutions.
Participation with Bank Guarantee for Bid Bond & Peroformanc
-
Categories : Chemicals, Other Inorganic Chemicals
India
- Contact Now