Archive Results for impact testing : 14 Buying Leads (BEFORE January 1st, 2015).
- 30 Jul, 2013
- Testing equipment: spectrum direct reader, magnetic particle detector, CMM, impact test machine, microscope, universal testing machine and Rockwell hardness tester
Surface roughness:
Rough casting: 6.3um
Finished casting: 0.8 to 1.6um
Outline dimensions: 1,000 x 620 x 380
Weight: 0.001 to 80kg
Mini
-
Categories : Hardware, Valves
China
- Contact Now
- 30 Jul, 2013
- Testing equipment: spectrum direct reader, magnetic particle detector, CMM, impact test machine, microscope, universal testing machine and Rockwell hardness tester
Surface roughness:
Rough castings: 6.3um
Finished castings: 0.8 to 1.6um
Size and weight range:
Outline dimensions: 1,000 x 620 x 380mm
-
Categories : Hardware, Valves
China
- Contact Now
- 30 Jul, 2013
- Testing equipments: spectrum direct reader, magnetic particle detector, CMM, impact test machine, microscope, universal testing machine and rockwell hardness tester
Surface roughness:
Rough casting: 6.3um
Finished casting: 0.8 to 1.6um
Outline dimensions: 1,000 x 620 x 380mm
Weight: 0.001kg
80kg mi
-
Categories : Hardware, Valves
China
- Contact Now
- 30 Jul, 2013
- Testing equipment: spectrum direct reader, magnetic particle detector, CMM, impact test machine, microscope, universal testing machine and Rockwell hardness tester
Surface roughness:
Rough castings: 6.3um
Finished castings: 0.8 to 1.6um
Outline dimensions: 1,000 x 620 x 380mm
Weight: 0.001 to 80kg
-
Categories : Hardware, Valves
China
- Contact Now
- 8 Jan, 2013
- Impact
energy
J
Test temperature
PSL1 B(L245) 245 415 AS PER
API 5L --
X42(L290) 290 415 --
X46(L320) 320 435 --
X52(L360) 360 460 --
X56(L390) 390 490 --
X60(L415 415 520 --
PLS2 BR(L245R)
BN(L290N) 245-450 415-760 AS PER
API 5L AS PER
API 5L
X42R(290R)
X42N(L290N) 290-495 415-760
X46N(L320N)
-
Categories : Minerals & Metallurgy, Steel Pipes
China
- Contact Now
- 16 Jun, 2012
- Test Chemical Component Analysis Mechanical Properties (Ultimate tensile strength Yield
strength Elongation) Technical Properties (Flattening Test Bending Test Hardness Test Blow Test Impact Test etc.) Exterior Size Inspection Hydrostatic Test(The standard pressure is limited to 207 MPa (3000 psi))
-
Categories : Minerals & Metallurgy, Steel Pipes
China
- Contact Now
- 9 Jun, 2012
- and gas transport ,structure ,boiler,heat exchanger,super heater
Test Equipment: Eddying Test ,Ultrasonic Test,Hydrostatic Test,Hardness Test.
Impact Test,Flaring Test,Corrosion Test,Flattening Test and so on.
Contact :Eva Han
Tel :(86)317 5128238
Fax:(86)317 7613588
Mobile :(86)15075778799
-
Categories : Minerals & Metallurgy, Steel Pipes
China
- Contact Now
- 3 Feb, 2011
- - 155,000 psi
Yield Stress 0.2%: 110,psi min.
Elongation in 2": 13% min
Reduction in Area: 50% min
Hardness: 270-330 Brinell
Impact testing to ASTM A370 at -46 degrees C with minimum average value of 20 ft. lbs with no value below 15 ft/lbs
Grain size: 5 or finer
Magnetic particle and US tested
-
Categories : Minerals & Metallurgy, Steel Round Bars
Canada
- Contact Now
- 5 Oct, 2009
- Impact Test at -25 degrees C)
3.Origin : Japan, Europe, India, Russia, CIS or Turkey
4.Total Quantity : 4,863,107Kg
5.Delivery Time : From 2 Months after receipt of L/C,
530MT or 1060MT per month for 7 months.
***Earlier shipment and or one lot shipment can be accepted.
6.Terms of Price :
[1]CFR U
-
Categories : Minerals & Metallurgy, Steel Sheets
Korea
- Contact Now
- 13 Mar, 2009
- Test Method Requirement
Sheet Thickness ASTM D1593 Para. 8.1.3 30 mils
Minimum
Average 30 mils
Density ASTM D792 Method A >1.20 g/cm3
Tensile Strength at Break ASTM D882 Method A or Min 69 lb per in. width
B
Elongation at Break ASTM D882 Method A or Min 300%
B
Modulus at 100% Elongation ASTM D882
-
Categories : Rubber & Plastics, Other Plastic Raw Materials
Pakistan
- Contact Now
- 20 Dec, 2008
- We looking for 1/2''ROTARY/IMPACT DRILL for our market.If price&quanlity are good for us,we would have a sample order immediately for presentation and functional testing.
Our specific requirements are :-
1/2'' ROTARY DRILL
1/2'' IMPACT DRILL
Please quote your best FOB price + pic + technical data.
- This buyer would like not to disclose his contact information.
-
Categories : Tools, Electric Drills
China
- Contact Now
- 11 Apr, 2008
- SPECIFICATIONS
Guaranteed Analysis - >99.50% Sulphur (actual tested 99.99%)
Physical Properties
Product sizing: 270 SGN, Mesh –6 / +8
Angle of Repose 29 Degrees
Breakage Tests ( % Fines Produced ) < 0.57%
Impact (SLI) 0.2%
Abrasion (SLII) 1.43%
Bulk Density (packed) 72 lbs/ft? or 1152 kg/ cub
-
Categories : Chemicals, Other Organic Chemicals
China
- Contact Now
- 16 Jun, 2007
- test
C) Regrind / prime and off grade polystyrene(PS):
COLOR: Natural/white and transparent color
PACKING: (25 kg / etc)?
GRADE: (Extrusion / high Impact /etc)?
QUOTATION: CFR Bandar Abbass port, Iran?
QUANTITY:300-1000mts/month;AND 200mts for test
D) Regrind / prime and off grade Polyethylene
-
Categories : Rubber & Plastics, Other Plastic Raw Materials
Iran
- Contact Now
- 10 Dec, 2006
- We would liek to import to the following products
1.Products : Seamless C.S pipe
SA333 GR. 6 + impact test temperature -54 c
2_SCH.160 X 3000 MM
2.Amount : Min. quantity
3.Price : C.I.F. Busan port. or F.O.B. export port.
Looking forward to receiving your posiyive reply soon
Best regards,
Edward
-
Categories : Hardware, Pipe Fittings
Korea
- Contact Now