Testing Instrument Wholesale

Particle Analyzing Instrument(Testing Sieve,Vibro Sieve)

This instrument is mainly applicable for sampling powder materials in lab.Features: 1. 0-30 minute time replay can be adjusted to get your analysis result; 2. Frequency of 1500 vibrations per minute makes material pass through the meshes more easily; 3. Two rotational speeds for different materials; 4. The clamp is easy to adjust. It is easy to install and remove mesh frames; 5. Rubber sprin

[Related Keywords : Testing Sieve, Particle Analyzing Instrument]

Silicone Heating Pad

• Place of origin:  

  China

instrument cabinets; 3) Freeze or condensation prevention in housings containing electronic equipment, for examples: liquid battery,traffic signal boxes, automatic teller machines, temperature control panels, gas or liquid control valve housings 4) Composite bonding processes 5) Semiconductor process heating 6) Food service equipment 7) Airplane engine heaters and aerospace industry 8) Drums an

[Related Keywords : silicone rubber heater, silicone flexible heater, silicone heating pad, silicone heating mat]

FPV Filter Pressure Value Tester

• Place of origin:  

  China

Detailed description: As a filter value testing instrument for blended polymer materials, it is plasticized and extruded by a standard screw for polymer blended materials, and the melt is passed through a standard filter screen after precise measurement, and the change of pressure in front of the screen is its filter value. The change of this filter value index allows to judge the size of inorgan

[Related Keywords : FPV]

EN Door Handle Durability Test Machine

• Min. Order:  

  1 Box

• Price:  

  US$ 5000 ~ 10000

• Place of origin:  

  China

• Supply Ability:  

  10

testing on time. Specification: a) Bench：Standalone table with casters b) Size：L1.0m x W0.6m x H1.4m c) Handle mounting block：350mm x 150mm x 40mm d) Test site：One test handle (two test sites are available if requested) e) Handle angle：30~60 degree adjustable f) Load P：60N，100N, changeable； g) Load L：60N，100N, changeable； h) PLC control，failure monitoring； i) S

[Related Keywords : Customized equipment, Testing equipment, Test Instruments, Life testing machine]

Ultra Low Temperature Chamber

• Place of origin:  

  China

Lenpure Ultra Low Temperature Chamber give the maximum durability and performance for your most demanding test requirements.It is the necessary test equipment for aviation, Aerospace, automotive, electronics, military and solar panel industry etc.It can be used to test and determine the parameters and performance of electrical, electronic products and materials in the most extreme temperature and

[Related Keywords : Ultra, Test Chamber, Low Temperature Chamber, Chamber]

Precision Machined Parts

• Place of origin:  

  China

testing procedures to ensure parts meet stringent tolerances. Challenges and Advancements in Precision Machining Precision machining presents unique challenges, including: Tolerance Control: Achieving extremely tight tolerances requires advanced machinery and skilled operators. Material Selection: Selecting the right material for the application can be complex due to various factors like strength

[Related Keywords : Precision Machined Parts]

Low Force Shaker System

• Place of origin:  

  China

Low Force Shaker System Designed for vibration and shock testing of small payloads weighing up to 500 kg, the compact but powerful JOEO air-cooled low force vibration test systems offers a wide band, maximum acceleration and relatively high force, making it a versatile and cost-effective solution for a wide range of test needs. Including product qualification, mechanical diagnosis and instrument

[Related Keywords : shaker system]

Mold

• Min. Order:  

  1 Unit

• Price:  

  US$ 1000

• Place of origin:  

  China

at the same time, we also have independent and complete after-sales service. Testing equipment: Hexagon 3D coordinates, Tokyo precision profiler, metallographic microscope, hardness tester, a full set of processing and testing instruments. Professional quality inspectors conduct all-round testing on the shipped products to ensure that the quality of the shipped products is 100% qualified.

[Related Keywords : Mold]

Film Sample Stretch Test Device|Film Bidirectional Stretching Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 93000

• Place of origin:  

  China

• Supply Ability:  

  20 sets per month

tests on a certain size of film samples at a suitable temperature and time according to the required tensile ratio. The data obtained from the tests can be analyzed by researchers. Film biaxial stretching machine developed by Guangzhou POTOP Co., Ltd. is a data-driven engineering instrument with good repeatability and accurate data; Can be operated offline, equivalent to a production line; Can im

[Related Keywords : film stretch machine, stretch test machine, Bidirectional Stretching, Streching Test Device]

Automatic Rockwell Hardness Tester

• Place of origin:  

  China

An Automatic handheld rockwell hardness tester is a specialized instrument used to measure the hardness of materials. It operates based on the Rockwell hardness testing method, which involves applying a minor load followed by a major load to an indenter and measuring the depth of penetration. The automatic version of this tester eliminates the need for manual load application and measurement, str

[Related Keywords : force gauge price]

On-line Monitoring of Current Temperature and Faults

• Min. Order:  

  1 Set

• Price:  

  US$ 2

• Place of origin:  

  China

• Supply Ability:  

  50000 Setsper month

SNV-300 current temperature and fault on-line monitoring instrument Current temperature on-line monitor and fault is the ring net switch cabinet, cable branch box, box installed in the power distribution network system becomes,for a real-time online monitoring device indicates the corresponding section of the cable short circuit and ground fault current, temperature and time. When the line is in

[Related Keywords : On-line Monitoring Instrument, Current Temperature, Fault Sensors]

CNC Machining Polycarbonate

• Min. Order:  

  1 Piece

• Price:  

  US$ 20 ~ 999

• Place of origin:  

  China

testing i Polycarbonate VS Acrylic Both PC and acrylic are thermoplastic engineering grade plastics, and they all have various performance characteristics. Acrylic is mostly used in advertising display and craft gifts, while PC is mostly used in industrial manufacturing and outdoor decoration. The main differences between PC and acrylic are: 1. Difference in Hardness Acrylic is less rigid than P

[Related Keywords : polycarbonate cnc service]

Medical Device Accessories

• Place of origin:  

  China

testing, and validation procedures. HHC ISO13485 certification Product Material Stainless Steel Components: Stainless steel is a commonly used material in the fabrication of medical device casings, supports, frames, and other structural components. Its resistance to corrosion and ease of cleaning make it suitable for various applications. Aluminum Alloy Parts: Aluminum alloys are typically employ

[Related Keywords : Medical Precision Parts]

High Low Temperature/ Low Air Pressure Test Chamber

• Place of origin:  

  China

High low temperature low air pressure test chamber is mainly used in aviation, aerospace, information, electronics and other industrial sectors to determine environmental adaptability and reliability of electrical and electronic products (including components, materials and instruments) under the action of high, low temperature and low air pressure alone or at the same time, and can carry out the

[Related Keywords : pressure chamber]

Declutchable Gear Box

• Place of origin:  

  China

testing instruments.Sophisticated technology and strict quality management system, furthermore gathering professional technical elites and world-leading technology team, taking advantages of new technology, new processing and new materials to ensure the stability and reliability of our products. 5.Quality Inspection Juhang has a strict inspection system, the most advanced inspection equipment and

[Related Keywords : Gear Box]

Auto Parts Housing Aluminum Die Casting

• Place of origin:  

  China

testing lab and the advanced and complete inspection equipment in the casting industry, including CMM inspection machine ,tensile testing machine, flaw detector spectroanalysis instrument, Salt mist testing machine, etc. 10.WHAT’S THE PAYMENT TERM? When we quote for you, we will confirm with you the way of transaction, FOB, CIF, CNF, etc. For mass production goods, you need to pay 30% deposit b

[Related Keywords : Die Casting]

Large PC Tube

• Place of origin:  

  China

test whether the lamps made by our lamp kit can meet the various indicators required by customers,6.A professional standard light source testing equipment for testing the light transmittance and other properties of plastic lampshades.JE always focus on product qualification from aluminum and plastic raw material to extrusion production line, from samples quality control to mass production control

[Related Keywords : PC Tube]

Laser Cutter for Stainless Steel

• Min. Order:  

  3000 Set

• Price:  

  US$ 4000

• Place of origin:  

  China

• Supply Ability:  

  6000 sets/year

instruments and some other industries. We can find that the most products would be thickness within 20mm. obviously it's the normal thickness for fiber laser cutting stainless steel. How Remcor laser cutting machines works for stainless steel cutting Let's have a check of our samples, which all from the real customer site. Below pic is Remcor 3000w laser cutting machines cutting stainless steel

[Related Keywords : cnc stainless steel engra]

Dustproof Testing Machine | Dust Proof Chamber

• Min. Order:  

  1 Set

• Price:  

  US$ 8950

• Place of origin:  

  China

Testing Machine | Dust Proof Chamber were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefuly, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in

[Related Keywords : Dustproof Testing Machine]

CNC Machining Center

• Min. Order:  

  1 Set

• Price:  

  US$ 30000 ~ 200000

• Place of origin:  

  China

testing process Mineral casting technology The company currently has more than one hundred R&D engineers in the machine tool industry at home and abroad and has established a mechanical and electrical R&D department. Through strategic cooperation with internationally renowned key component manufacturers, all products can be exported to the production system after three-dimensional optimization de

[Related Keywords : cnc machining center cost]