Place of origin:
China
Supply Ability:
store
ST-9605 Oxygen (air) bomb ageing oven Standards: GB/T2951.12,IEC60811-1-2,IEC60335-1,GB4706.1,GB 4706.8, IEC60335-2-17,GB/T5013.2,IEC60245-2 Applicable scope: This machine applies to aging test for electrical wires & cables & rubber jacket& plastic & artificial leather, and other macromolecule materials. (Aging test via oxygen and compressed air in specified pressure and temperature). Technical p
[Related Keywords : Oxygen bomb ageing test, air bomb ageing oven, material air bomb ageing, Ageing chamber]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
This series of force testing machines is engineered for both tension and compression testing, offering force capacities of up to 500 lbF (2.2 kN). Customers can choose between vertical and horizontal models, complemented by a wide selection of force sensors, grips, and fixtures to suit various testing needs. The IntelliMESUR® software facilitates the setup of tests, as well as the recording and
[Related Keywords : mechanical force gauge]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
machine interactive control, high accuracy, good repeatability Full hydraulic drive, simple structure, and high reliability Servo valve control pressurization system: improve the pressure control accuracy, and complete the test with higher requirements High accuracy, good repeatability, and height measurement is completed by the displacement sensor Reliable pressure testing system: using high-pre
[Related Keywords : Clamping Force Tester]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
compression machine is mechatronics equipment, which is mainly composed of main part, strong electric control button, operation display board, stretching accessories and other devices. The packaging compression table is mainly includes upper press plate, upper & lower limit, guiding shaft, movable crossbeam, force sensor, base etc. The table part is the transmission part of the testing equipment,
[Related Keywords : drop tester]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
machine on the ground during installation, without other complicated operations or installation TABLE OF KRD100 INCLINE IMPACT TESTER KRD101 series packaging compression tester is the ideal equipment for the compression strength test of various packaging containers with the features of advanced technology, complete functions, reliable performance, easy control and operation. It is designed to ass
[Related Keywords : KRD100]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
1000/year
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy shock. Comparing to traditional pendulum shock response spectrum tester, this machine has the advantages of high energy, stable pe
[Related Keywords : Shock Response Spectrum, SRS Test system, shock test equipment, shock test machine]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Supply Ability:
3 sets/month
Description enviClone Dual Static and Cyclic (Dynamic) Mechanical Load Tester or Testing Machine is a specially designed for IEC61215 standard MQT16, MQT20 clauses and IEC 62782 to test impact resistance of photovoltaic modules solar panels. By arranging multiple cylinders on the surface of the component, the cylinders can expand and contract to exert tension and pressure on the surface of the co
[Related Keywords : solar panel test machine, photovoltaic module test, pv modules tester, pv module test equipment]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from deforming or being damaged during handling, stacking, storage, and transportation due to insufficient packaging strength. This machine is one of the main testing equipment for corrugated packaging performance and comprehensive indicators, and is an ideal testing e
[Related Keywords : Shock Test Machine, Drop Test Machine, Vibration Shaker, Environmental Chamber]
Business Type
Manufacturer
Location
粤, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 2500
Place of origin:
China
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the
[Related Keywords : Waterproof Test]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
High low temperature humidity test chamber is suitable for high temperature, low temperature, high and low temperature cycle tests, constant humidity-heat and alternating humidity-heat tests on products (complete machines), parts and materials. It is widely used to detect various performance indicators of parts and materials of electrical and electronic, automobile and motorcycle, aerospace, ship
[Related Keywords : humidty test chamber]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
The walk-in test chamber is suitable for low temperature, high temperature, high and low temperature change, constant humidity heat, high and low temperature alternating humidity heat and other tests on the whole machine or large parts. The size and function of the working chamber can be customized according to the user's requirements. It uses assembly structure, with elegant and beautiful appear
[Related Keywords : test chamber]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
machine); 11. Power supply: 220V 50Hz 200W; Test items: 1. Connector single hole plug test; 2. Full row plug and pull test of connector; 3. Connector plug life test; 4. Connector single pin and plastic retention test; 5. Connector NORMAL FORCE test; 6. General compression and tensile failure test; Instrument features: 1. The test conditions can be set and stored by the computer. Select Setting
[Related Keywords : Force Tester]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 15000
Place of origin:
China
Supply Ability:
50 sets/month
Automatic Dust Clean Leakage Testing Pilfer Proof Closure Flip Off Cap Assembly Machine Factorio Description It is mainly used for various bottle cap leakage detection and dust removal and some non-standard product detection. For example: bottle cover, movable water cup cover, etc. can meet the requirements of assembly leakage detection and dust removal according to different requirements. Tech d
[Related Keywords : leakage testing machine, cap assembly machine, assembly machine factorio, flip off cap assembly]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Set
Price:
US$ 2350
Place of origin:
China
Supply Ability:
50
Machine1. Digital display2. High precision and easy to operate3. Steady working4. Reliable resultsDescriptions:Peel strength test for adhesive tape 90/180 degree;Tensile test for rubber and plastic;Bending test plasticTensile and bending tests of wire and metal sheets;Tear tests for textiles;Compression and bursting strength tests of beverage packaging.ApplicationIt is suitable for doing testing
[Related Keywords : Strength Testing Machine, Peel Strength Tester, Tape Strength Tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 2450
Place of origin:
China
Supply Ability:
50
Application: This machine is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products. Characteristics: 1. That Using the computer as the main control machine plus the special testing software of our com-pany can conduct all of
[Related Keywords : Tensile Testing Equipment, Tensile Strength Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 6500
Place of origin:
China
Supply Ability:
60
Electronic universal material testing machine equipment introduction:The electronic universal material testing machine is widely used in the mechanical performance test of rubber, plastics, metal bars, metal pipes, metal plates and metal profiles and composite materials. It is also suitable for various finished products to stretch, compress, peel, and shear with special fixture Cutting, tearing,
[Related Keywords : Universal Testing machine, Tensile Strength Tester, TensileStrength equipment]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 9800
Place of origin:
China
Supply Ability:
50
digital encoder to ensure precise control and measurement of specimen position. 2.A wide range of tests can be performed, including break testing , tensile testing , compression testing, etc. 3. servo motor, which ensure high efficiency, steady transmission and low noise. 4. The shoulders of the test specimen can be manufactured in various ways to mate to various grips in the testing machine.
[Related Keywords : Universal Tensile Testing, Tensile testing machine, Tensile strength tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 5000 ~ 13000
Place of origin:
China
Product DescriptionUniversal Testing MachineThis Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-force mechanical test （ 5KN, 10KN,20KN,optional ） , such as tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterpro
[Related Keywords : 20KN Universal Testing, Universal Testing Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Set
Price:
US$ 5000 ~ 13000
Place of origin:
China
Universal Testing MachineThis Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-force mechanical test （ 5KN, 10KN,20KN,optional ） , such as tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fiber
[Related Keywords : Tension Tensile Testing, Textile Tension Test, Tension Test Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
500 Set
Price:
US$ 80000
Place of origin:
China
Supply Ability:
5000platform
test applications without changing the hardware. Features of the connecting rod hardness sorter: 1. The sorting instrument is divided into eddy current hardness testing (can display Brinell, Rockwell hardness), flaw detection and so on. 2. Hardness test: After starting the machine, use the hardness test probe to perform hardness test sorting on the workpiece. The Brinell or Rockwell value can be
[Related Keywords : tubing flaw detector]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive compression testing machine products from various compression testing machine manufacturers and compression testing machine suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as testing machine, universal testing machine, tensile testing machine, testing equipment, testing equipments, tester, pressure testing machine, materials testing machine, concrete testing machine and compression tester for your choice.
 |
Recommended Content
