Video
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
Supply Ability:
50 set per month
test module to achieve parallel or serial test High performance: Hipot, insulation resistance, surge, winding resistance, inductance, and rotation can be tested at one-stop Easy-to-maintain: Multiple languages: multiple languages can be selected. 4. Technical specification AC Hipot ： Applied AC high voltage from the silicon steel sheet to iron core, and test the current of testing loop. Out
[Related Keywords : Stator testing]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 9999999
Place of origin:
China
CanNeed-SCT-210 Stress Cracking Tester is a special instrument for testing the stress crack resistance of blow-molded PET carbonate bottles.The effect of lye on PET bottom was tested after the production line was cleaned.The 26 stations, each station has a corresponding pressure test, in the set time to observe the PET bottle bottom rupture.Measurement method: Constant pressure test, simulate the
[Related Keywords : PET bottled drinks stress]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 9999999
Place of origin:
China
line. The appropriate torque value has a great influence on the transportation and final consumption of the products. It is one of the key product indicators which needs to be controlled by enterprises. CanNeed-ATT-Line-1000 Automatic Torque Tester is the ideal instrument to do this test. It can be placed maximum 12 samples, then automatically sampling by conveyor belt. The sample will be measure
[Related Keywords : Torque Tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
YH800F portable fully automatic pressure calibration device adopts PP safety protection box, internal steel lining structure, shoulder bag design, fully intelligent control, modular integration, integrating pressure generation, pressure control, testing, data acquisition, and data processing. The pressure generation and measurement unit is placed inside the box, with a large capacity rechargeable
[Related Keywords : calibrator, pressure calibrator, calibration, automatic]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
test area, and a dual armature guidance system consisting of an up and down guide mechanism for added stability when testing heavy payload items. Optional bearing line table and head expander with external guide can be used for heavy, unstable loads. Exciting force range of 30kN to 70KNMax. Load range of 500kg to 1000kgDisplacement peak-to-peak: 51 mm,76mmJOEO water-cooled high-force shaker syste
[Related Keywords : vibration shaker]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 86000
Place of origin:
United States
Model 1150 StaticonIn-Line Monitoring And Controlling Of Electrical Conductivity Of Fuels In a Variable Stream (ASTM Standard Test Method D2624 included in Specifications D975, D1655, and D7566)To reduce the hazards of electrical charge build up that can occur especially during high pumping rates of low conductivity materials through filters, additives are added to the product. Emcee Electronics,
[Related Keywords : Model 1150, Electrical Conductivity, In-Line]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Combo
Price:
US$ 16000
Place of origin:
United States
Water Separation Characteristic, Free Water And Particulate Testing (ASTM Standard Test Methods D3948, D7224, D7261 & D4860)(D3948 is included in Specifications D1655 and D7566) For quality control purposes, water separation characteristics of fuels are rated to determine the amount of surface active materials (surfactants) present. Surfactants degrade the performance of filter separators used to
[Related Keywords : Emcee, 1140 Model, Micro-Separometer]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
60 sets per month
Steel Bar/Steel Tube/Steel Pipe/Rebar Bending Testing Machine GW-50B-type pipe bending testing machine is reinforced when the line-plane bending testing reverse the testing equipment, for the testing methods in article 4, paragraph 4, 5, 6 for production and test, and its main technical parameters in line with the standard requirements of GB5029 -85. it is the essential testing equipment for the
[Related Keywords : bending testing mahcine, rebar bending testing mahcine, bending machine, testing machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
Supply Ability:
20 sets per month
testing with destruction of samples when exposed to sand and dust, and allow to test the tightness of the products. Technical specifications: Model HD-500 HD-800 HD-1000 Volume 512 L 800 L 1000 L Internal dimension (D*W*H) 800*800*800 mm 900*900*1000 mm 1000*1000*1000 mm Technical specifications Metal screen standard spacing 50 um Spacing between lines 75 um Talcum powder amount 2 Kg/m2~4 Kg/m
[Related Keywords : Sand dust chamber]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
lines 75 μm Talcum powder amount 2 kg/m3～4 kg/m3 Blowing dust cycle Cycle control, can control the total test time, and can also program the blowing dust time and stop time for cycle operation. Material Shell material Cold rolled sheet steel, rust-proof and spray plastics on surface Internal materials SUS304 stainless steel Working chamber structure Funnel-shaped, adjustable vibration period
[Related Keywords : sand dust test chamber]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
ST-6601 Insulation Resistance and Conductor Continuity Tester Range: It used to check the insulation resistance and conductor continuity testing for 2 cores of AC/DC power cord, Audio line plug, earphone line plug and Video plug etc. Features: Can be test the resistance of conductor continuity, conductor continuity, open circuit, and relatively length etc. For difference test result for differenc
[Related Keywords : Plug Continuity test, plug insulation resistance test, Plug test meter, VDE plug tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 5000 ~ 10000
Place of origin:
China
Supply Ability:
20sets/month
test chamber meets the requirement of ISO16750-4 clause 5.4.2. It can be used for splash water or high temperature test alone, to simulate ice water splashing over a hot system or components when driving on wet roads in the winter. Failure modes are mechanical cracking of materials or seal failures caused by different temperature expansion coefficients. It’s a reliability testing equipment for
[Related Keywords : splash test chamber, ice water splash tester, ISO16750-4 test chamber, ISO16750-4]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
Supply Ability:
5000 sets per month
test per hour Battery voltage is sampled once per 5min Support online CT pickup power and solar power To support the avoidance of various non fault cases Support timing reset, power on reset automatically, Remote reset Support recording function Characteristic Support for the judgment of the Coincidence gate Accurate synthesis of zero sequence Current Intelligent motor control card Ultra low powe
[Related Keywords : Overhead Line, Fault Indicator, Earth Fault Indicator, Short Circuit Fault Indicator]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
5000 sets per month
test, 16KA, 2 second Insulator Test: 1) Insulator resistance test ≥10 MΩ 2) Dielectric strength test, 1min,AC 2KV. IP protection level test, IP67: Anti –dust IP6X Anti-water: IPX7 Spring clip strong: 8 times self-weight. fire-protection rating: 5 grade Function character a. real time measurement of three-phase on line current； b. Detection and judgment of short circuit faul
[Related Keywords : Overhead Line, Short Circuit Fault Indicator, Earth Fault Indicator, Remote Type]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
line, contents are dropped into the bag immediately after the sealing bars have opened. Since the content can be heavy, the hot seal must be able to withstand high loads, thus requiring a high hot tack force. Hot tack testing is importance for upgrading materials and packing efficiency. Advantages of HTT-02 Hot Tack Tester 1.Hot Tack Measurement: The instrument measures the hot tack strength of p
[Related Keywords : Hot Tack Tester, Tensile Tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 1300
Place of origin:
China
The VC5000A Power Quality Analyzer is a three-phase, multi-function, intelligent, and simple comprehensive test instrument specially developed for on-site testing. It is easy to use, large LCD color screen display, high resolution, a bilingual operation interface in Chinese and English, and vibration-proof structure shell. It can measure 4 currents (ABC three-phase and neutral wire current),4 vol
[Related Keywords : power quality analyzer, Portable Power Quality, 3 phase Power analyzer]
Business Type
Supplier
Location
Chongqing, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
test equipment we provide can be used for avionics and military hardware testing, satellite component testing, R&D laboratory and system identification testing, product development, reliability, stress screening, etc. Constant Acceleration Tester CME Offers CME is a professional constant acceleration tester manufacturer since 2006. KRD30 Constant Acceleration Tester (Box Type) KRD31 Constant Acc
[Related Keywords : Constant Acceleration Tes]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
tests, then, we keep several samples for future reference, and send the other samples to the clients so that they can get the actual feel of the product before manufacturing in bulk. We are able to accommodate changes and modifications at this stage. Place order - After back and forth communication and possibly making several rounds of samples, once the client is fully satisfied with the final sa
[Related Keywords : procurement agents in Chi]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Video
Min. Order:
1 Set
Price:
US$ 4000 ~ 7000
Place of origin:
China
Supply Ability:
999 Set/ Sets per Week
MCT-01 Motorized Cap Torque Tester Application The measurement of the open and lock forces of bottle caps holds significant importance as both online and offline technical parameters in production. These forces can have a direct impact on the ease of product transportation and consumer usage. Due to its exceptional stability and precision, this measurement becomes an indispensable tool in the ma
[Related Keywords : ASTM D2063 torque tester, ASTM D3198, ASTM D3474, bottle cap torque tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
Supply Ability:
999 Set/ Sets per Week
test running speed of packaging line can be realized. Coefficient of Friction Tester Principle The two samples are placed together. A long strip sample is fixed on the flat surface and another square sample is applied force by a sled. The friction force is measured when they slip against each other. Coefficient of Friction Tester Features PLC control and touch screen operation Real time display o
[Related Keywords : friction tester, COF tester, ASTM D1984, plastic friction tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Competitive testing line products from various testing line manufacturers and testing line suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
