Place of origin:
China
the instrument; ★Operation setting: Pre-set 6 commonly used voltage measurement modes to meet the needs of conventional instrument testing; Chinese/English voice broadcast, the volume is adjustable; Flicker alarm for leakage detection; Times of leakage counts; Unique multi-functional connector; ★Certificate: Calibration certificate: Key parameters (output voltage, discharge current, insulatio
[Related Keywords : Insulation Detector, medical Insulation tester, medical sealing machine, detal sealing machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Set
Price:
US$ 9999999
Place of origin:
China
CanNeed-SCT-210 Stress Cracking Tester is a special instrument for testing the stress crack resistance of blow-molded PET carbonate bottles.The effect of lye on PET bottom was tested after the production line was cleaned.The 26 stations, each station has a corresponding pressure test, in the set time to observe the PET bottle bottom rupture.Measurement method: Constant pressure test, simulate the
[Related Keywords : PET bottled drinks stress]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 9100
Place of origin:
China
the tested table; ◆ Support the input of parameters for the tested instrument and the setting of calibration process parameters; ◆ The verification process can perform data analysis, calculation, and automatic identification of errors; ◆ Form verification record formats and certificates that comply with national verification regulations or user requirements; ◆ The pressure control method
[Related Keywords : intelligent automatic, portable calibrator]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 9999999
Place of origin:
China
the can, bottom depth and height of the can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans. Advantages: l Contact measuring mode, with touch screen and PLC control. l Can be equipped with single conveyor lane (three lanes by custom option). l Fully automatic measurement, free up the testing time for inspectors and
[Related Keywords : Dimensions tester for can]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 9999999
Place of origin:
China
The torque value of opening and closing is one of the key controlling parameters on production line or offline. The appropriate torque value has a great influence on the transportation and final consumption of the products. It is one of the key product indicators which needs to be controlled by enterprises. CanNeed-ATT-Line-1000 Automatic Torque Tester is the ideal instrument to do this test. It
[Related Keywords : Torque Tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
BPT-4000 Ramp Pressure Tester is an advanced testing instrument for pressure testing glass containers, also can be used to test the burst value.Two positions, high efficiency. PLC controlled, LCD touch screen display. Automatic clamping system, servo control pressure process. Display real-time data, test and save data automatically.Two test ways: :linear pressurization and pressure maintaining. U
[Related Keywords : Pressure Resistance Test]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
The interior of the working space is designed with stainless steel and no dead corners. The temperature and humidity field is uniform, the layout is reasonable, and it is convenient for the placement of the tested instruments, thus preventing the improper placement of the tested objects from affecting the calibration environment. ◆Two adjustment test holes are convenient for operation, and the
[Related Keywords : temperature, humidity, calibration, intelligent]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
YH630A Automatic pressure instrument control bench adopts standard integrated design, modular integration, integrated design layout, set pressure making, pressure control, testing, data collection, data processing as one. The pressure occurrence and control system is placed inside the table body, and the pressure measurement standard can be the standard digital pressure module produced by the com
[Related Keywords : calibrator, pressure, automatic, calibration]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
the calibration of various process instruments such as pressure gauges, pressure transmitters, pressure sensors, pressure switches, etc., greatly improving the efficiency and accuracy of on-site work. 11.Data management: It has powerful data collection and processing functions, can store and analyze calibration data, and facilitates subsequent recording and tracing. ◆ Compliant with the latest
[Related Keywords : calibrator, pressure calibrator, calibration, automatic]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
the platform body, and the computer display screen can be expanded, which is easy for users to operate from multiple angles. It is suitable for the verification and calibration of various pressure meters, pressure transmitters, pressure switches, pressure sensors and other industrial process instruments. ◆Comply with the latest national calibration regulations; ◆It is composed of high-precisi
[Related Keywords : calibration, automatic, pressure, calibrator]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 1002.9 ~ 1253.6
Place of origin:
China
Supply Ability:
60000 Pieces per Month
This is a device for non-contact measurement of natural gas (CH4) concentration based on laser absorption spectroscopy. When the instrument is working, it emits a specific wavelength range (the center wavelength is not the same for different gases under test)of the detection laser, which is diffusely reflected when it ments reflector (e.g. the ground, valves, pipelines, walls, etc.), and part of
[Related Keywords : Laser Methane Detector, Natural Gas, Pipe Line Monitoring]
Business Type
Supplier
Location
Henan, China
Employees Total
1 - 5
Annual Revenue
Less than USD 100,000
Min. Order:
1 Unit
Price:
US$ 8000
Place of origin:
United States
Supply Ability:
100
the conductivity of hydrocarbon fuels only. Limiting factors are the viscosity of the fluid and the conductivity level to be measured. However, electrical conductivity of other fluids can be measured and/or ranges of the instrument can be modified by Emcee to accommodate higher conductivity values than the standards offered.Theory of OperationA specific volume (100-mL) of test sample is introduce
[Related Keywords : EMCEE, Model 1154, Conductivity Meter]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
The Three Comprehensive Vibration Test Chamber is an instrument and equipment that simulates high temperature, low temperature, high and low temperature cycles, constant humidity and heat, and alternating humidity and heat tests. When connected to an vibration shaker, it can achieve comprehensive testing of temperature, humidity, and vibration factors. It is generally applicable to scientific res
[Related Keywords : vibration test system]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Combo
Price:
US$ 16000
Place of origin:
United States
the fuel. The presence of water can impair engine performance and initiate microbiological growth, which can cause corrosion in tanks and filter plugging in fuel lines. Also for quality control purposes, fuels are subjected to “Clear & Bright” tests to determine the amount of free water and particulate matter in mid-distillates.Description of Instrument & TestsThe Model 1140 Micro-Separometer
[Related Keywords : Emcee, 1140 Model, Micro-Separometer]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
2000 pcs/ month
Multi Channel Ultrasonic Flaw Detector Introduction The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly
[Related Keywords : Ultrasonic Flaw Detection]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Supply Ability:
2000 pcs/ month
ultrasonic flaw detector Introduction It can be used in a lab or field. The instrument can be widely used in any fields that need defect inspection and quality controlling e.g. manufacturing industry, iron & steel metallurgical industry, metalworking, chemical industry, etc. This machine is also used broadly in the active safety inspection and service-life evaluation such as aerospace, railway tr
[Related Keywords : ultrasonic flaw detector]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
1 Set
Price:
US$ 650 ~ 690
Place of origin:
China
Supply Ability:
1,000 Set/ Sets per Month
Instrument Technology Co., Ltd. specializes in rubber and plastic testing machine, metal detector, textile testing machine and shoe testing machine for more than 8 years. With advanced technology, excellent product quality and best customer service, the products are exported to more than 100 products. Countries and regions have won praises from customers around the world. We have a profession
[Related Keywords : Paints Rotational Viscometer, Oil Viscometer, Viscometer]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Video
Min. Order:
1 Set
Price:
US$ 170000
Place of origin:
China
Supply Ability:
10 sets per month
Film-stretching Instrument | Laboratory Film Stretching Machine APPLICATION New product development in the feld of high-end film. Test and analyze physical and chemical properties of new material film forming Formulation design of high-end film. Process research and parameter oplimization. Model FOHI-10 Applicable materials PE, PP, PET,PTFE, PVDF, etc. Sample thickness 0.02-2mm Sample size Min.95
[Related Keywords : Film-stretching, Film Stretching Machine, Laboratory Stretching, Film-stretching Instrumen]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 1888
Place of origin:
China
test for determining values of cable flame propagation and smoke release when the cables are subjected to a flaming ignition source. (It is nothing to the purpose of cables, such as the electric power, telecommunications etc.) Main components: Main consist of Ignition source & supply fire control system, collection hood & exhaust duct flux control system, pressure measurement instrumentation of g
[Related Keywords : UL1685 flame test room, UL1581 flame test chamber, Vertical tray flame test, Cable vertial tray flame]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
The introduction of three coordinate error correction eccentricity correction technology further improves the measurement accuracy of the instrument; Measure the functions of internal and external straight teeth, helical teeth, spiral bevel teeth, involute splines, hobbing cutters, shaving cutters, gear cutters, worm gears, etc. Technical Parameters Model 30 45 65 80 100 120 Tested gear modul
[Related Keywords : Gear measuring machine, gear testing machine, gear inspection machine]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Competitive tests the instrument products from various tests the instrument manufacturers and tests the instrument suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
