Performance Testing Wholesale

Desktop Optical Switch 1x18

• Place of origin:  

  China

Performance Parameter Parameter Values Model XH-FSW-1X8-T Wavelength Range 1260~1650nm wavelength 1310/1550nm Insertion Loss ≤ 1.2 dB Repeatability ≤ 0.02 dB Return Loss ≥ 50 dB Crosstalk ≥ 70 dB WDL ≤ 0.25 dB PDL ≤ 0.05 dB Fiber Type SM(9/125um) Connector FC\PC or FC/APC Monitoring port Pushbuttons,RS-232 Operating power AC:100~240V Operating Temperature -10 ~ +60ºC Operating Tempe

[Related Keywords : Desktop Optical Switch, Optical Switch, network switch]

1X8 PM Optical Switch

• Place of origin:  

  China

test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features ● Low insertion loss, wide wavelength range ● Low channel crosstalk, high stability, high reliability ●Proprietary technology, no glue in the optical path ●Locking and non-locking control types are available Performance Parameter Param

[Related Keywords : Optical Switch, PM Optical Switch, mechanical optical switch]

1X4 Optical Switch

• Min. Order:  

  1 Piece

• Price:  

  US$ 300

• Place of origin:  

  China

• Supply Ability:  

  5000

test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features ● Low insertion loss, wide wavelength range ● Low channel crosstalk, high stability, high reliability ●Proprietary technology, no glue in the optical path ●Locking and non-locking control types are available Performance Parameter Param

[Related Keywords : optical switch, network switch, mechanical optical switch, Fiber optical switch]

2.5Gbps APD-TIA module

Featrues High sensitivity APD High performance -34 dBm Sensitivity Wide dynamic range, typically 0.4µW to 0.3mW(p-p) Differential transimpedance of 3.5 Bandwidth from DC to 2.1 GHz Differential outputs On-chip Automatic Gain Control (AGC) Low Power Consumptio of 3.3V supply voltage Wide data rate range from 155Mbps to 2.5Gbps(low frequency cut off at 3kHz) Applications Digital fiber optic

[Related Keywords : Photodiode]

100G OTN Muxponder

• Min. Order:  

  1 Set

• Price:  

  US$ 100

• Place of origin:  

  China

• Supply Ability:  

  100

Performance Monitoring Optical module TX/RX power level, wavelength, temperature Ports OTU Section OTU Far Section ODU Path ODU Far Path OTN FEC Correct error OTN FEC uncorrected error Diagnostic test Loopback Facility loopback: local loopback, remote loopback PRBS test Supports Protection Line Protection Work with OTNS8600 OLP additional Management OSC out of band 2xOSCs, 1000BaseFx SFP Ethernet

[Related Keywords : dwdm transponder vs muxpo]

Fiber Optic Attenuator

Features 1. Excellent environmental stability 2. Attenuation stability 3. Excellent return loss 4. Polarization insensitive 5. Easy installation 6. Telcordia GR-910-core requirement Applications 1. Telecommunications systems 2. Local area networks 3. CATV 4. Subscribe loop 5. Test equipment 6. Optical fiber sensors Performance specification Item Criteria Operating Wavelength (nm)

[Related Keywords : Fiber Optic Attenuator, Attenuator]

Aoc / Dac / Transceiver

• Min. Order:  

  1 Acre

• Price:  

  US$ 1 ~ 5

• Place of origin:  

  China

testing ensures the best out-of-the-box installation experience, product performance and durability. Fiber Optic Transceivers As a leading fiber optic transceiver manufacturer, T&S Communication supplies a full range with all-round categories from 10Gb/s to 100Gb/s optic transceivers in terms of transmitting rates. Transceivers we offer are compatible with the most majority of mainstream devices

[Related Keywords : fbt coupler]

8 Ports 1550nm Er/Yb Co-doped Optical Amplifier

• Min. Order:  

  1 Box

• Price:  

  US$ 650

• Place of origin:  

  China

• Supply Ability:  

  60,000 Set/ Sets per Month

test conditions are performed by GT/T 184-2002. C/CTB dB ≥ 63 C/CSO dB ≥ 63 Supply voltage V AC220V(160V~265V)/AC110V(90~130V)/DC48V(38~58V) Customized Power consumption W ≤ 50 Working Temp ℃ -5 ~ +42 Max relative humidity % Maximum 95% no condensing Storage TEMP ℃ -30 ~ +70 Max storage relative humidity % Maximum 95% no condensing Size mm 357(W)*482(L)*44(H) Packing size (1set) mm 595(

[Related Keywords : Optical Amplifier, EDFA, EYDFA, CATV]

OLT GPON SFP Transceiver Class B+ TX 1490nm 2.5G RX 1310nm 1.25G 20km SC DDM Transceiver Module

• Place of origin:  

  China

TX-2.5G/RX-1.25G GPON Transceiver Class B+ (SMF, 1490nm-TX/1310nm-RX, 20km, SC ) Description The GIGAOPTO's GTS-SGT21-20DCB is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet ITU G.984.2 Class B+ requirements for optical line terminal (OLT) applications. The 1490nm DFB LD tran

[Related Keywords : GPON SFP Transceiver]

Optical Fiber Connector-leather Cable Jumper Scu PC Series

• Place of origin:  

  China

testing instrumentation, etc. ● product has won the bid for the three major group operators of China Mobile, China Unicom, and China Telecom, and has been widely adopted by the radio and television systems of various provinces and cities in China. ● nearly 20 years of professional production experience, the products meet the industry standards of the Ministry of Industry and Information Tec

[Related Keywords : Optical Fiber Connector, Optical Fiber, patchcord]

LC OM3 Fiber Optic Adaptor

• Place of origin:  

  China

• Price Condition:  

  FOB

and optical performance. Features: LC Adaptor with excellent changeability and directivity 100% Optic test (Insertion Loss) Ceramic and phosphor bronze sleeve tube optional Accurate external size Individually packaged Application: Fiber optic transmission system CATV networks LAN Testing/Measurement Instruments Fiber distribution frame, Mounts in Fiber Optic Wall Mount and Rack Mount Cabinets

[Related Keywords : fiber adapter, optic adapter, OM3 optic adapter, fiber optic]

OTDR with Built in Power Meter ,Light Source and VFL

• Min. Order:  

  1 Piece

• Price:  

  US$ 642~685

• Place of origin:  

  China

• Supply Ability:  

  20 pieces per week

test dimension Continuous Applications It is mainly used to measure the length, loss and connection quality of all kinds of optical fibers and cables, and can be widely used in engineering construction, line maintenance and testing, emergency repair, and the development and production of optical fibers and cables. Features ·High performance test ·Integrated5.8 inch color TFT LCD display,to

[Related Keywords : OTDR, Multi function OTDR, OTDR machine]

LC Fiber Optic Patch Cord

• Min. Order:  

  50

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  100000

which can provides excellent environmental stability for PM amplifer, fiber lasers and test instrumentation applications. LC stands for Lucent Connector. The LC is a small form-factor Fiber optic connector. The LC Connector uses a 1.25 mm ferrule, half the size of the ST. Otherwise; it is a standard ceramic Ferrule connector. The LC has good performance and is highly favored for single mode.

[Related Keywords : Fiber Optic Communication, LC Patch Cord, FC/LC/ST/SC/E2000, Jumper LC]

Fluke DTX-1800 CableAnalyzer

• Price:  

  USD 5999

• Place of origin:  

  United States

tester to obtain UL classification for ISO Accuracy Level IV. And, the DTX 10 Gig Copper Kit together with DTX-1800 delivers on the promise of a future-proof investment - measuring 10 Gig cabling performance and Alien Crosstalk (ANEXT and AFEXT) in full compliance with the industry standards to 500 MHz. The AC Wiremap feature validates twisted-pair cabling for Power over Ethernet services in acco

[Related Keywords : Fluke DTX-1800, DTX-1800, Fluke, CableAnalyzer]

Fujikura FSM-60S Fusion Splicer

• Price:  

  USD 7000

• Place of origin:  

  United States

• Price Condition:  

  FOB Changi International Airport, SG

performance, and download video images from the splicer to enhance technical support. Features: Rugged construction providing shock, dust and moisture resistance Dual monitor position with automatic image orientation Automatic arc calibration and fiber identification User-selectable fiber clamping method – sheath clamp or fiber holders Auto-start tube heater feature Color LCD display w

[Related Keywords : Fujikura FSM-60S, FSM-60S Splicer Kit, Fujikura Splicer Kit]