Assembly System Wholesale

Hypodermic Needle Making Machines

• Place of origin:  

  Korea

Fully automatic needle assembling system. Various sizes of needle can be assembled by adjustment and or replacement of needle inserting jig, etc. The adjustment of dispensing quantity of epoxy bond or U.V. bond in accordance with the required specification is available. Self-checking for defection product Electric Power : 2 Phase x 220V x 50/60Hz, 13Kw Dry Conveyor Motor : DC 1Hp (with speed cont

[Related Keywords : Hypodermic Needle manufacturing machine, needle making machines, needle assembly machine]

Spring Hanger (Deflection : 25mm)

• Place of origin:  

  Korea

system's natural frequency to 3~5 Hz and using the CR type guide Rubber attached on the top plate, it prevents the high frequency transferred through pipes and ducts from passing into the structure on top of the hanger. In addition, it can be assembled with 60% of the available load using the pre-setting nut to prevent the equipment from moving around by the distortion of the spring, and because

[Related Keywords : vibration control]

Special Purpose Reactor - Polymerization Reactor

• Place of origin:  

  Korea

safety through the multi-safety devices Customized engineering - A variety of types and specification for customer - Different types of research are available by various additional components. Easy maintenance - A variety of measurements facilitate analyzing operating conditions - Easy assembly/disassembly and clean up - Quick response to customer request by customer service team.

[Related Keywords : Autoclave, ASME, Pressure Vessel, Polymerization Reactor]

Biomass Wood Pellet Making Plant

• Min. Order:  

  one plant turn-key base

• Price Condition:  

  FOB

systems Drying method; A conventional saw-dust dryer are large in size with rotary drum drying. This drying type needs a heavy energy input and makes a longer drying time. The instalment area for the drying equipment is large. our drying systems ae using our new tech compact conductive drying technologies. our drying's highly energy saving and shorten the drying time also,needs a small assembly a

[Related Keywords : pelleting]

GRP Water Tank(Grp Panel Tank)

assembly Intensity & Durability To maintain best endurance, the glass fiber reinforced panel is molded under high temperature & pressure. Since using stainless steel for inside structure and plated steel for outside, it shows best performance against erosion. Heat Insulation and Dewdrops Prevention The heat insulation panel with 3 layer structured improves heat insulation effect. Protects water f

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Pioneer 300 series

Auto Contact Angle Analyzer Model : Pioneer 300 series Features The Pioneer 300 Wafer Surface Analysis System is designed for 300mm semiconductor wafer processing quality control. The Pioneer 300 provides quick and accurate contact angle/ surface energy measurements of the wafer surface for evaluating adhesion, cleanliness and surface treatments. The position of the optic assembly is computer-co

[Related Keywords : Auto, Contact, Angle, Analyzer]

Transport Carts

Systems Meet the requirements of products and space Efficient in product management Easy in and out of products through the side of the rack Easy to keep the products in order Provide satisfactory clean working environment Easy assembling and modification according to the customer's special requirement Designs meeting specific needs of customer Product specification/models Size and shape

[Related Keywords : racking, shelving, rack, shelve]

Automatic Mold Taping Machine

system: ±0.04mm Electricity: 220v 1 Phase 50/60Hz, 660W Compressed Air: 5 Bar (Oil & Moisture free) Dimension -TPM2000: 870mm x 850mm x 2160mm (W x L X H) -ATM1000: 883mm x 865mm x 2160mm (W x L X H) Thickness Measuring Equipment Type CTM-1000 The equipment for the precise thickness measurement of the assembled mold. It is recommended to use for the distance compensation in between the fro

[Related Keywords : Automatic Mold Taping Machine]

Water Tank Vision and Welding Machine

• Place of origin:  

  Korea

assemblies can either be loaded onto the machine with or without the end caps spot welded onto the main tank body. If the assemblies are already spot welded, the machine will start the visioning process by rotating the assemblies on a lathe like fixturing system to check the entire circumference of the joint between the end caps and the tank body for tight dimensional tolerances through the use o

[Related Keywords : Welding machine, Stainless steel tank welding, Brazing amchine, Vision welding machine]

IV Infusion Set Assembly Line

• Place of origin:  

  Korea

I.V Infusion Set Assembly Line Description BS Medical is a leading manufacturer of full automatic production line for medical devices. As a turn-key project, may also supply injection machine, injection mould, automatic raw material transferring line, clean room construction and manufacture infrastructure such as recycling system, air supply system, water cooling system, etc. Reliable services in

[Related Keywords : IV Infusion, IV fluid, IV set, Assembly machine]

Remodeling, Modification, Up-grade

• Place of origin:  

  Korea

| Remodeling, Modification, Up-grade -. Description 1. Up-grade Material Improvement Major parts replacement, and part of the balance compensation Board Replacement and Software Back-up 2. Remodeling and Up-grade Customizing System and Sub-system Chamber and Assembly Parts 3. Delivery : 1 week ~ 4 weeks 4. Warranty : 1 Year

[Related Keywords : Remodeling, Modification]

SIEMENS Mechatronics Systems Certification Program Trainer

• Place of origin:  

  Korea

or by combining more than two stations for practical training. Siemens S7-300 Series 314C-2DP model was applied to each station to enable practicing a PROFIBUS PLC Network using a DP Port The user may practice disassembling and assembling the hardware to learn and understand the mechanism The palette transportation method uses a conveyor as a logistics base of the production system

[Related Keywords : SMSCP, Systems Certification Program Trainer, SIEMENS Mechatronics]

Tel Act 8, 12 / Tel Mark Overhaul

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Assembly (EBR, Back Side Rinse and Photo Resist Nozzle Tip) manufacture - DEV Nozzle Assembly (H, SH, Spray and Stream type) manufacture - Plasma to LED LCD modification and Upgrade for TEL MARK by Low -cost Auto Chemical SupplySystem modification and upgrade - CSS or Manual Supply or Both supply modification - Buffer Tank Auto Exchange Type System modification - Solvent/Develop/HMDS Ch

[Related Keywords : wafer, track, tel track, tel act]

Automatic Blister Packing Machine

FEATURES - High productivity and easy operation. - Computer design and simulation by CAD/CAM system. - All pars fabricated by CNC and LASER processing machine. - Automatic control by programmable panel system. - adjustable production capacity by simple controls. - Systematic combination with syringe printing and assembly machine. - accurate forming and sealing by servomotor control

[Related Keywords : AUTOMATIC BLISTER PACKING]

VH61 Spring Hanger (Deflection : 25mm)

• Place of origin:  

  Korea

system's natural frequency to 3~5 Hz and using the CR type guide Rubber attached on the top plate, it prevents the high frequency transferred through pipes and ducts from passing into the structure on top of the hanger. In addition, it can be assembled with 60% of the available load using the pre-setting nut to prevent the equipment from moving around by the distortion of the spring, and be

[Related Keywords : building materials, anti-noise, vibration-control, shock-control]

Benchtop Hydraulic Press

• Min. Order:  

  1

• Place of origin:  

  null

• Price Condition:  

  FOB Busan

The HHP series is an affordable line of standardized benchtop hydraulic presses within a 1-30 ton capacity range. All HHP Series presses offer high-speed, high-precision performance. They are very suitable for, but not limited to; assembly, compression, punching, trimming, blanking, stamping, and coining applications. These standardized systems can also be modified for specific applications that

[Related Keywords : Benchtop, Hydraulic press, assembly, caulking]