Built In Wholesale

DMTP 6500

Description DMTP 6500 which has high reduction ratio is suitable for various type of boat such as the Fishing boat, Tug boat & etc. Additionally, the PTO built in the gearbox make it possible operate the pump for hydraulic system. High Reduction Ratio 5.11-6.95 high reduction ratio High powered efficiency Power Take Off Live P.T.O 58kgf,m Torque(150hp at 1800rpm) SAE B type SAE C Type Start Op

[Related Keywords : Marine Transmission]

DMTP 5100

Description DMTP 5100 is a special model which utilize new technology of Dong-i. The P.T.O built in the gearbox make it possible to operate the pump for htdraulic system such as the steering system, winch & etc. Power Take Off Live P.T.O 58kgf.m Torque (150HP at 1800rpm) SAE B Type, SAE C Type Trolling Valve Slow Speed Cruising Torsional Coupling Noise and Vibration Reduce 11.5'', 14'' Flex

[Related Keywords : Marine Transmission]

Gear Type Liquid Level Transmitter (SGL)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

R/I converter outputs 4~20mA DC analog signal by using the built in potentiometer. Features: Remote and local indications are available. Easy to carry and install. Compactness of this model permits installation in a cramped space where there is a limited headroom. Output: Dial Display/4-20mA ADC/Dial Display&4-20mA ADC Maximum applicable temperature: Up to +85C Wet part material: 304SS or 316SS

[Related Keywords : Transmitter, Magnetostric Type Liner Level]

Ultrasonic Plastic Welding Machine

built-in Constant amplitude is maintained regardless the input voltage change of 180 ~ 260 Volt. (In general model, there is amplitude fluctuation of ± 10%, in case of input power change of ± 2%) 2 steps constant amplitude function Keeping constant amplitude with 2 steps amplification function of generator applied FET or IGBT and AVR device regardless loading condition. The most adv

[Related Keywords : welder, engineering, machine]

Ultrasonic Plastic Welding Machine

built-in Constant amplitude is maintained regardless the input voltage change of 180 ~ 260 Volt. (In general model, there is amplitude fluctuation of ± 10%, in case of input power change of ± 2%) 2 steps constant amplitude function Keeping constant amplitude with 2 steps amplification function of generator applied FET or IGBT and AVR device regardless loading condition. The most adv

[Related Keywords : welder, engineering, machine]

Digital Level Meter

• Place of origin:  

  Korea

• Price Condition:  

  FOB

in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery. ※ Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by

[Related Keywords : pressure meter, digital]

Card Laminator NL200 with LCD Control Panel and High Level Physical Security

• Place of origin:  

  Korea

Enclosures : Protect unauthorized access with multiple locks and Kensington lock slot. • User-Friendly : Simplicity is built into the design, operation on LCD and automatic film type detect. • Various usages: Manual feeding or auto feeding stand-alone or all-in-one when connected to card printer NUVIA [Applications] • ID badges• Membership cards and Banks cards• Access control

[Related Keywords : Card laminator, Security card, ID card, Coating card]

Car Battery Post Burning Machine

• Place of origin:  

  Korea

SK Brazing has built several types of car battery pots soldering machines. It is soldered in special dies with gas/oxygen heating. It is made with in-line free flow conveyor unit with several torch units. Pls visit our web site, www.skbrazing.com or www.skbrazing.co.kr for more infromation. SK Brazing offers a complete range of brazing and welding and soldering service including materials, autom

[Related Keywords : Battery post burning machine, Car Battery pot soldering, Battery pot soldering machine, Brazing machine]

Distributer Brazing Machine

• Place of origin:  

  Korea

SK Brazing has built many different types of brazing machines for brazing of copper or aluminum distributers. This 10 station index machine is used for mass production. For less production, we would like to recommend 2, 4 or 6 station index machines. Also, we can use gas/ oxygen or gas/air flame depending on an item condition. We used to recommend a copper/tin/phosphorus paste with a circle strip

[Related Keywords : Copper distributer brazing machine, Aluminum header brazing machine, Brazing machine, Brazing equipment]

Aluninum Coil Brazing Machine

• Place of origin:  

  Korea

We have very special design to avoid an orange peel phenomenon crack and an erosion on brazing of aluminum u-bends coils. We have built several types of gas flame brazing/soldering machines for brazing of aluminum u-bends for heat exchangers. This machine has three stage flame control functions and memory control of flame strength, conveyor speed, burner height, burner width & degree, as options.

[Related Keywords : Brazing machine, U-bend brazing machine, Heat exchanger brazing machine, Brazing equipment]

Copper Coil Brazing Machine

• Min. Order:  

  1

• Price:  

  USD 70000

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan

For brazing of heat exchanger coils We have built several types of brazing/soldering machines for heat exchangers assemblies, which offer many advantages. Three stage flame function (preheating/main heating/post heating Memory control of burner height, width, degree (option) Memory control of flame strength, conveyor speed, etc. In-line type Index type

[Related Keywords : Brazing machine, Coil Brazing Machine, U-bends Brazing, Heat Exchanger Brazing]

Piston Motor

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Piston Motor Introduction Fixed displacement motor A10FE are axial piston motors in swash plate design These compact motors can be used for hydrostatic transmissions or for fan drive system Features Axial piston-swash plate design Compact size, high power/weight ratio Output speed is proportional to input flow Plug-in version for installation into machine Built in valve: integrated flushing and

[Related Keywords : Piston Motor, Motor, parts]

Oil purifier

built-in manifold valve, etc. Adoption of multi-monitor system integrating detection and display functions Combined mode for total/partial discharge using pilot valve discharge mechanism (Model GSH-1) Adoption of double impeller method and spiral chute in all models Standard equipment of direct connection suction pump (Gear type) Adoption of graphic control panel (Model GBC-1) Specification

[Related Keywords : Oil purifier]

Desk Top Robot

• Place of origin:  

  Korea

built-in robot controller for stepper-motor and servomotor ▶ 3D interpolation under the conditions of heavy weight, high speed and high accuracy precise motion control at the corner as well ▶ Special dispensing software for sealing, coating and spread of adhesive ▶ Built-in all electrical wirings and pneumatic lines related dispenser and controller ▶ Easy after-service of cont

[Related Keywords : dispensing robot, desk top robot, step motor robot]