Display Controller Wholesale

Pioneer 300 series

Auto Contact Angle Analyzer Model : Pioneer 300 series Features The Pioneer 300 Wafer Surface Analysis System is designed for 300mm semiconductor wafer processing quality control. The Pioneer 300 provides quick and accurate contact angle/ surface energy measurements of the wafer surface for evaluating adhesion, cleanliness and surface treatments. The position of the optic assembly is computer-co

[Related Keywords : Auto, Contact, Angle, Analyzer]

2) Wet End

Auto Splicer Specifications Model No. HMS20 Slice speed 200m/min Precise automatic web tension control Paper grades 100~400g/m2 5. Over Head Bridge, Suction Brake 5-1. Over Head Bridge Drive Motor : V.S. Motor for Take Up Conveyor Cutomers' optional specifications acceptable 5-2. Suction Brake Specifications Braking method Suction brake type Paper guide set Quick set & position digital display

[Related Keywords : mill roll stand, paper, machine]

Torque Tube, Displacement Type Level Transmitter (SDT-420)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Control Center where located far distance from site. It is also possible to be adjustment, operation, and control easily by using conventional remote keypad on site. Features: Possible to communicate with HART or SIEMENS PDM. Measurement range : 300~5,000mm. Process temperature : Wetted parts -40 ~ 450°C Process pressure : 200 f/cm2 Output signal : 2-Wire type 4~20mA, HART, LCD. Range of sp

[Related Keywords : Transmitter, Displacement Type Level Transmitter]

Ultrasonic Plastic Welding Machine

control device Displaying various welding condition and information, controlling the welding time at 0.01 unit. Momory for welding conditions Available to save and read up to 10 memory welding condition, which makes easy for applying to various welding products. Self-chech for good or bad welding quality Welding quality control to check good or bad welding quality by itself according to the setti

[Related Keywords : welder, engineering, machine]

Digital Temperature Controller

• Place of origin:  

  Korea

control ㆍIP 65 front facia ㆍHeating/Cooling hysteresis Input Thermocouple : K, J, E, T, R, S, B, L, N, U, WRe 5-26, PL-II R.T.D : Pt 100Ω, KPt 100Ω Direct voltage : 1~5V, 1~10V, -0~20mV, 0~100mV --------------(Free scale type) Sampling cycle 250ms Input display resolution Below decimal point of Input signal and Measuring range Input impedance T/C and mV input : Min, 1MΩ DC V : 1MΩ Sou

[Related Keywords : Temperature Controller, Temperature regulator, PID Temperature controller, Controller]

Automatic Mold Taping Machine

Controller -Center thickness adjustment -Tape length adjustment -Taping height control -Error message display External air blower to clean the mold before input Mold in-feed by conveyor with max. Stand-by of 5 molds Antistatic belt conveyors Controllable conveyor speed Tape width of 12 to 30mm can be applied Automatic tape-end folding Easy Tape replacement LCD Monitor Display System in Clean Benc

[Related Keywords : Automatic Mold Taping Machine]

Shipyard Machinerys

• Place of origin:  

  Korea

Features For the straightening and bending of the steel plate, stiffner, and long C.N.C Plate Roll Bending Press C.N.C Control system Colour Display 12" TFT 2D Grapical C.N.C Automatic bend Sequence P.L.C Functions Operator Warning Full hydraulic force Proportion Control Servo Control Right And Left Balance Vertical Roll Bender PLC Function Proportion Control system Provided adjustable b

[Related Keywords : Shipyard Machinerys, machinery]

Roller Hearth Continuous Furnaces

controlling the temperature with the difference of 1‹C to the width direction.. Our own intake/exhaust system enables the appropriate burn out even when loading racks. The cooling system equipped at the lower part of the oven (Returning Spot) enables the shorter length of the furnace.. Applications Various firing of PDP (Plasma Display Panels) Surface coating of CRT (Cathode Ray Tubes)

[Related Keywords : Roller Hearth Continuous Furnaces, RH]

Semi-Auto Cold Press

• Min. Order:  

  1

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan

• Supply Ability:  

  1

display (digital type). Timer: Pressure time adjustment (digital timer). Remote relief valve: Manual operation for hydraulic pressure Easy Mold Change Mold: Circular Type (Both Vertical and Horizontal Mold Available) Automatic Pressure Control Double Punch Available Specifications Voltage & Power supply : 380V & 3 phase, 60Hz (50Hz) Power consumption : 6.5KW Pressure : 500kg ~ 25,000kg Air press

[Related Keywords : semi-auto cold press, cold press]

Auto Announcing

Specification Out-put Channel : 8 ch(MAX) Interface Port : 2 Port Date Communication : RS-232C, RS-422 Speed : 9600bps Display : LCD Loop sensor : 8 Port(Contact) Memory IC : Flash Type System control : Microprocessor Sampling frequency : 15.6Khz Out put level : 0dbm Power Source : AC 220V, DC 24V Weight : 8kg Dimension : 483(W) x 133(H) x 320(D)

[Related Keywords : Auto Announcing]

Check Weigher

display Standard display for user easy checking Level Bar type display X-R graph display Histogram showing all distribution chart of production Total count No & percentage for over, under, pass, Metal error and N.G in the histogram display are showed. 13. Data communication with printer or computer(Option) Printing all data showed in the controller display Printing all product data per product Tr

[Related Keywords : Check Weigher]

Water Tank Vision and Welding Machine

• Place of origin:  

  Korea

control 2. Minimizing heat distortion 3. Providing uniform welding quality with precise size control These are typical quality concerns associated with manual welding operations. Water tank assemblies can either be loaded onto the machine with or without the end caps spot welded onto the main tank body. If the assemblies are already spot welded, the machine will start the visioning process by rot

[Related Keywords : Welding machine, Stainless steel tank welding, Brazing amchine, Vision welding machine]

Multi Robot Trainer

• Place of origin:  

  Korea

control, Ir sensor detection, character LCD display, digital I/O control, buzzer control and RF control on the experimental table Features 1. IEG 2010-1 : 8051 (T89C51AC2) IEG 2000-02 : AVR (ATmega32) IEG 2000-03 : PIC (18F452) CPU : T89C51AC2 CPU : ATmega32 CPU : 18F452 System Clock : 20MHz System Clock : 16MHz System Clock : 10MHz Flash Memory : 32kbyte Flash Memory : 32kbyte Flash Memory : 3

[Related Keywords : Robot, microprocessor, itenlligent, isp]

Oil purifier

display functions Combined mode for total/partial discharge using pilot valve discharge mechanism (Model GSH-1) Adoption of double impeller method and spiral chute in all models Standard equipment of direct connection suction pump (Gear type) Adoption of graphic control panel (Model GBC-1) Specifications Main Body Supply Pump Bowl : High-tension stainless steel Bowl nut : Carbon steel Di

[Related Keywords : Oil purifier]