Easy For Operation Wholesale

Fatigue Tester

for the Construction Frames/Automotive Spare-parts, etc and it if possible to test from Simple Static Load Testing th High-Powered Dynamic Load Testing by selection of various optional parts. It can be tested formal tensile and compression test. It can be installed high and low chamber at the tester afterward due to have a high distances of cross head and column. Easy to operate and keeping a dat

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Water Chiller - Absorption Chiller (AR)

operation time Because of its special spray technology, the unit requires less liquid and less heat to operate effectively. It also requires less dilution time. Convenient Stopping and Storage Because the solution does not remain static in the generator, there is minimal risk of corrosion.l Easy access for repairs and maintenance Because the chiller and heater are narrow, there is ample space for

[Related Keywords : Absorption Chiller, Chiller, Industrial Chiller system, Water Chiller]

Hydro Check

operations, such as auto feed drilling, grinding and cutting. Accessories are easily fixed to Hydro Check with Snap Ring and Mounting Block and are easy to be relocated. The oil inside Hydro Check is automatically filtered and the operation speed is always controlled consistent for convenient operations under any conditions. Hydro Check can be use where speed control is required .e.g. Drilling Ma

[Related Keywords : hydro check, shock absorber, hydraulic buffer, koba]

PC Based Sensor Trainer

• Place of origin:  

  Korea

easy to attach and detach sensor modules during practical training). The marking of the diagram symbols and the sensor circuit map enhance understanding and learning during practical training. The provision of sensor application modules where real life situations have been applied to fit the sensor operation conditions enables various practical training. Modules Measure and control modules DAQ c

[Related Keywords : Robotics, Sensor Trainer, Electronics, Trainer]

Covering Machine - DAE SUNG MACHINERY

• Place of origin:  

  Korea

• Price Condition:  

  FOB

THE KEYNOTE of this Covering Machine - For bother Single and Double Covering - Cost Savings Effected and Advanced Covering Machine - Traverse angle, taper angle and No of spindles are free by C.P.U Control. - Sever Traverse adopted of New Technology - The Covering Machine being easy to operate

[Related Keywords : Covering, Covering Machine, Textile Machine, Signle & Double Covering]

Nitrogen Generator Machine (N2 Generator)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

for Limited Space Membrane type Air Seperation Module Weight, No Noise, Lower Price H2O Pre-Filtering Easy Operating Control Effectiveness Conforming RoHS standards (Pb-free) - For Hand-Soldering Unit and Soldering Robot Preventing oxidation of Pb-free by providing nitrogen Improvement in wetness and broadness (Less Bridge effects) Extending the durability of the tip of the iron Reduction in lead

[Related Keywords : Nitrogen Generator Machine, Generator Machine, N2 Generator, Pb-Free Soldering]

Full Auto. Needle Assembly Machine

Features - High productivity and easy operation. - Computer design and simulation by CAD/CAM system. - All parts fabricated by CNC and LASER processing machine. - Automatic control by programmable panel system. - Adjustable production capacity by simple controls. -Automatic inspection system for no - good needles. - Covering housing by aluminium frame and acrylic plate for keep clean state.

[Related Keywords : Needle Assembly]

Automatic Open / Shut Device for Greenhouse (DC Motor)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

HCM- 13 Series For special crops ffabric suitable automatic open & shut device Features Lightweight Noiseless operation Rapid opening & closing Simple travel distance control No separate gearbox requ ired High torque Easy installation Specification Model Volt/Watt Use Travel Distance RPM Ratio Torque Weight Output Shaft/Pipe HCM-139015A-3 DC24V/90W Thick Vinyl O/C(Animal) 32/64 Rotation 2.5M/5

[Related Keywords : Automatic Open, Greenhouse materials, Shut Device, Curtain dairy motor]

Kjc Press Seat

• Min. Order:  

  1 pc

• Place of origin:  

  Korea

• Price Condition:  

  EXW Busan

for KJC Product http://ebook.ec21.com/joint/default1.html * OPERATION CONDITIONS 1) Operation Range : 0.3 ~ 9.5mm Steel Plate (Slitter Knife) 2) Piston Push Power : Max 24,000 kgf * FEATURES 1) Locating at Spacer type shaft of Slitter machine 2) Prevent the Slip or Release of Spacer or Knife by oil pressing 3) Easy and simple implementation can increase productivity

[Related Keywords : KJC PRESS SEAT]

Lever Hoist, Lever Block

• Place of origin:  

  Korea

• Price Condition:  

  FOB

operation is free chaining. Setting the reversing lever to N(neutral) allows unloaded hook to be moved to the optimum position for attaching the load (free chaining) Gears : Six tooth pinion gear and four pocket load sheave makes operation easy. Gears are permanently lubricated Mechanical Load Brake : Brake can hold a full capacity load stationary in any position. Load is not transferred back to

[Related Keywords : Lever Block, Lever hoist, Other Manufacturing, lifting]

Auger Filler for Powders (SAF-40G)

• Place of origin:  

  Korea

Auger Filler for Powders (SAF-40G) Introduction This is the auger filling machine which is designed to fill powderd and granuiar products of specific preset real net weight into containers such as cans, bottles, bags, cartons, etc. Features Accurate filling Simple maintenance Easy disassembling for cleaning Easy operation Specification Filling method : - a. Control the number of revolution - b.

[Related Keywords : Auger Filler, Filler]

Industrial Furnace Parts

• Place of origin:  

  Korea

• Price Condition:  

  FOB

has durability, energy saving, easy operation method. Specifications RADIANT & RETORT TUBE FOR FURNACE HEATER & HEATER TUBE FOR FURNACE SKID RIDER FOR RE-HEATING FURNACE FAN WHEEL FOR HEAT-TREATMENT FURNACE HEAT TREATMENT JIG[TRAY & BASKET] BURNER PART FOR FURNACE BRICK SUPPORT FOR FURNACE BRICK SUPPORT FURNACE ROLL HEATER FAN WHEEL LINK BELT RADIANT TUBE RECUPERATOR RETORT TUBE SKID RIDER

[Related Keywords : radiant tube, retort tube, fan wheel, burner part]

Prime Sterilized Water Manufacturing Unit

• Place of origin:  

  Korea

• Price Condition:  

  FOB

operation portion Anyone can easily let the water flow or stop flowing by manipulating button only once. End of worry for electricity bill, water charge! Since sterilized water can be generated only with water and salt, it is very economical as 58 Won when producing 1.5 tons of 100PPM sterilized water. (This cost may vary depending on the cost of raw materials) Intuitive display portion Anyone

[Related Keywords : Sterilized Water Manufacturing, Sterilized Water, Water Manufacturing]

Spare Parts (Roll Tire, Separator, Force Feeder Bin, Roller Casing Etc.)

• Place of origin:  

  Korea

Spare Parts (Roll Tire, Separator, Force Feeder Bin, Roller Casing etc.) [Description] JEIL can supply all spare parts of other companies as well as allow normalization and upgrade of whole plant with diagnositc workup of existing, operating Cold and Hot briquetting plant. Roll Tire(Segment Roll) As core part of briquetting machine, it is used for pressing raw material to make briquettes shape. R

[Related Keywords : Roll tire, Separator, Briquetting roll, Force Feeder Bin]

SMA2 Spring Mount (Deflection : 50mm)

• Place of origin:  

  Korea

■Features As an open spring mount, it is usually used together with the inertia base. It is easy to install and has a static deflection that is visible to the naked eye, which facilitates inspection after installation. It has the same components as SMA type, but has a static deflection of 50 mm, and therefore, it is used when operation of equipment needs to be quieter, such as when air con

[Related Keywords : noise-control, vibration-control, shock-control, spring]