Guide Wholesale

Pipe Anchor & Guide (Deflection : 3~9mm)

• Place of origin:  

  Korea

- With a highly-elastic resilent element inside the steel housing, the product is used as a guide to reduce the stress generated by thermal expansion between floors during the expansion and contraction of vertical pipes and as an anchor to isolate structure-borne noise in both vertical and horizontal directions that has resulted from changes in the fluid pressure. Though the anchor and guide can

[Related Keywords : vibration control]

Chain Block

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Guide : Allows smooth operation of load chain Load sheaves : Deep cast pockets precisely fit the load chain. Load shafts are supported by prelubricated bearings for smooth operation Load Chain : Electric welded G80 alloy steel chain is heat treated for wear resistance and strength. Accurately and uniformly sized to seat properly in load sheaves DSN Type Model DSN 0.5 DSN 1 DSN 1.5 DSN 2NEW DS

[Related Keywords : Chain Block, Other Manufacturing, material handling, lifting]

Trustor DIsc Brake

guide roller is attached to the connecting points of releasing device, so that the releasing is softly and easily made. Noise is not produced because the upper and down parts are well fixed. Brake Sensor The brakes are prepared with sensors of on-off and lining abrasion thereon, and therefore, in-between maintenance can be evaded. Specification Installation Method : Horizontal base plate Enclosur

[Related Keywords : TH Elema Eng, AC Magnetic Brake, Oil Thrustor Brake, Clipper Brake]

Destacker

Features Easy to loading in operation time (2 Magazine) Can to separate working by Floter Dual slide guide allowing excellent durability Continuous line work during table change by 2 table Easy to loading by the Setting Jig Specification Model YDT-350 YDT-400 YDT-700 Work MAX size 350 x 300mm 350 x 300mm 350 x 300mm Thickness 0.5~4.5T 0.5~4.5T 0.5~4.5T Material EGI, SUS, ASC, SPP, etc Lifter Lift

[Related Keywords : Destacker, Robot, Processing Machinery]

Cash Dispenser (For 2 Denomination)

guides and paths to minimize jam occurrence 4) To maximize convenience in maintenance or clearing by opening -- guide structure 5) To realize so compact and slim size to be easily applied to even -- small space 6) To speed at a rate of 3.5 banknotes/sec Product Specification ==================== - Dimension : 310.2(D) x 360(H) x 266.7(W) - Application Type : The Core Unit for CD, ATM - Access Typ

[Related Keywords : Cash Dispenser, Module]

Automatic Gas Cutting machine

A.Light Automatic Gas Cutting machine -Straight cutting on rail -Hand guided cutting -Circle cutting (dia.360mm-1000mm) B.Two Torch Portable Cutting machine -parallel & bevel cutting on rail C.Portable Pipe Gas cutting machine -Pipe cutting dia.100-600mm by chain link.

[Related Keywords : Cutting machine]

2) Wet End

Auto Splicer Specifications Model No. HMS20 Slice speed 200m/min Precise automatic web tension control Paper grades 100~400g/m2 5. Over Head Bridge, Suction Brake 5-1. Over Head Bridge Drive Motor : V.S. Motor for Take Up Conveyor Cutomers' optional specifications acceptable 5-2. Suction Brake Specifications Braking method Suction brake type Paper guide set Quick set & position digital display

[Related Keywords : mill roll stand, paper, machine]

WJ-PFP460

guide. The operator can check an accurate location through the scale(ruler) from the mold center to 0~maximum 900mm on the left side and 0~maximum 900mm on the right side. So the operator can process accurately and promptly. The processing speed can be adjusted in accordance with various processing through up/down adjustment limit. A sefty cover has been attached to the machine for the operato

[Related Keywords : Panel Punching Press]

Robot Dress Pack System

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Robot Dress Pack System I-Type Features 1. The spring-guided support (I-Type) allows the system to become more flexible and easier to install against conventional type. 1. The support keeps the tube at a distant from the robot arm to avoid any interference. 1. The support is self-adjusting type upto 300mm in the axial movement. 2. Easy to install and move in diredtional change via use of clampi

[Related Keywords : Welding Robot, Welding System]

VH61 Spring Hanger (Deflection : 25mm)

• Place of origin:  

  Korea

guide Rubber attached on the top plate, it prevents the high frequency transferred through pipes and ducts from passing into the structure on top of the hanger. In addition, it can be assembled with 60% of the available load using the pre-setting nut to prevent the equipment from moving around by the distortion of the spring, and because the spring is coupled with V-bolt, the spring does no

[Related Keywords : building materials, anti-noise, vibration-control, shock-control]

Auto. Uni-Boby Insulin Syringe Assembly M/C

GUIDE IN PUSHING i. EJECT & CHANGE ZIG j. SILICON SPRAY l METHOD OF SILICON SPRAY :NOZZLE IN INSIDE BARREL---SILICON SPRAY l SILICON PUMP : MAGNETIC PUMP NH-30PX k. PLUNGER ASSEMBLY PART l SUPPLY TYPE : SHUT TYPE l SHUT DRIVING : VIBRATOR 1/8HP l METHOD OF PLUNGER ASSEMBLY : GUIDE IN PUSHING l. EJECTION OF BLOCKAGE-CANNULA UNIT l BAD INSULIN : AUTO EJECT m. UPPER CAP ASSEMBLY PART l SUPPLY TYPE :

[Related Keywords : Uni-Boby Insulin Syringe Assembly]